| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized |
| Colour | RAL 7035 |
| Scope of delivery | Cabinet frame, rear panel, base plates |
| Degree of protection IP according to EN 60 529 | Up to IP 54 (depending on cladding) |
| Test basis | IEC 61 439-1/-2, IEC 61 641 |
| Width | 1.000 mm |
| Height | 2.000 mm |
| Depth | 800 mm |
The Rittal modular enclosure VX 9680.008 is an industrial enclosure made of sheet steel, designed for use in bayed systems of the VX25 series. It serves as a basic element for modular electrical and automation systems, where flexible, modular partitioning and the installation of partial doors are required. The dimensions are 1,000 mm width, 2,000 mm height, and 800 mm depth, making it suitable for medium to large control systems. The enclosure is manufactured from sheet steel with a wall thickness of 1.5 mm, ensuring sufficient mechanical stability and load capacity for mounting components and devices.
Modular construction and design
The enclosure consists of an enclosure frame, a rear panel, and floor plates, which together form the basic body. The enclosure frame is dip-primed, the rear panel is also dip-primed and externally powder-coated with a textured finish, providing a uniform, durable surface resistant to corrosion and mechanical stress. The floor plates are galvanized to ensure an additional corrosion protection layer. The color is RAL 7035, a standard gray tone commonly used in industrial environments.
Protection rating and test basis
The protection rating according to EN 60 529 is up to IP 54, with the exact protection class depending on the type of cladding. This means the enclosure is dust-tight and protected against splashing water, making it suitable for use in indoor environments as well as in lightly exposed outdoor areas. The test basis includes standards IEC 61 439-1/-2 and IEC 61 641, which regulate electrical safety and the construction of control systems. These standards ensure that the enclosure is suitable for use in industrial electrical installations.
Applications
The enclosure is intended for use in industrial electrical installations, such as in manufacturing automation, power supply, or process control. It can be used in bayed systems, enabling flexible expansion and adaptation to different requirements. The modular design allows integration of partial doors and internal partitions, ensuring an organized and clear arrangement of electrical components.
Compatibility and accessories
The enclosure is part of the VX25 bayed system and can be combined with other components of the VX system, such as partial doors, internal partition panels, or mounting elements. The exact selection of accessories depends on the specific requirements of the installation. The use of appropriate cladding is essential for achieving the maximum protection rating of IP 54.
Mounting and installation
Mounting is carried out by connecting the pre-fabricated components – enclosure frame, rear panel, and floor plates – using the designated fastening elements. The construction is designed to allow simple and quick assembly without requiring additional tools or mounting aids. The dimensions and modular design facilitate integration into existing installations or expansion of control systems.
Operational advantages
The enclosure offers high mechanical stability and a durable surface coating, extending the service life of the unit. The modular design enables flexible adaptation to different requirements, simplifying maintenance and expansion of the installation. The IP 54 protection rating provides sufficient protection against dust and splashing water, increasing reliability in industrial environments. The use of sheet steel with 1.5 mm wall thickness ensures sufficient load capacity for mounting heavy components.
Scope of delivery
The scope of delivery includes the enclosure frame, rear panel, and floor plates. These components form the basic body of the enclosure and are necessary for mounting and use in bayed systems.