| General |
| Material | Duroplastic polyester |
| Scope of delivery | Including mounting brackets and screws |
| Suitable for busbars | Width: 100, Height: 10 mm |
| Number of poles | 3-pole, 4-pole |
The SV 9674430 from Rittal is an end holder for the distribution busbar system in switch disconnector fields. It provides vertical support for the busbar system when power is supplied from above and is mounted at the ends of the busbar to ensure stable fixation and mechanical safety. The product is specifically designed for busbars with a width of 100 mm and a height of 10 mm, making it compatible with standard busbars such as E-Cu 100x10 mm. The construction made of duroplastic polyester ensures high mechanical strength and resistance to environmental influences, making the end holder suitable for use in industrial enclosures.
Applications
The end holder is used in power distribution within enclosures, particularly in switch disconnector fields, where secure fixation of the busbars is required. It is designed for applications where power supply comes from above, which is typical for distribution systems in industrial and commercial electrical installations. Its use in combination with 3-pole and 4-pole switch disconnectors enables flexible integration into various switchgear configurations.
Functions and Equipment in Detail
The SV 9674430 is designed as an end holder to fix the busbar at the end of the busbar system and secure it against displacement. Installation is carried out using integrated mounting brackets and screws, which are included in the delivery. These components enable simple and secure mounting on the enclosure wall or within the enclosure frame. The material choice of duroplastic polyester ensures high strength and heat resistance, increasing reliability during operation.
Technology Explained Simply
Duroplastic polyester is a thermosetting plastic material characterised by high mechanical stability and resistance to chemical influences as well as temperature fluctuations. These properties make the end holder suitable for use in industrial environments where high loads and environmental conditions occur. The vertical support during top-side power supply ensures that the busbar does not shift due to its own weight or electrical forces under load, thereby increasing the safety and reliability of power distribution.
Compatibility and Accessories
The end holder is specifically designed for busbars with dimensions of 100 mm width and 10 mm height. It is therefore compatible with standard busbars such as E-Cu 100x10 mm, which are used in many distribution systems. As an accessory, the busbar E-Cu 100x10 mm, L=2400 mm, is offered, which can be directly combined with this end holder. The 3-pole and 4-pole configuration enables use in various switchgear configurations, depending on the number of conductors in the distribution.
Mounting and Installation
Installation is performed by mounting the included mounting brackets onto the enclosure wall or within the enclosure frame. Subsequently, the busbar is inserted into the end holder and secured using the included screws.
Operational Advantages
The use of the SV 9674430 ensures stable and secure fixation of the busbar, increasing the reliability of power distribution. The material quality ensures long service life and resistance to mechanical and thermal stresses. The simple installation and compatibility with standard busbars facilitate integration into existing enclosure systems and reduce installation time.