Rittal 9208100, EAN: 4028177952126

Rittal 9208100 KE 9208100 Ex enclosure 600x800x300 mm

Industrial Material > Enclosures / Chassis > Enclosures

Rittal 9208100 KE 9208100 Ex enclosure 600x800x300 mm

Lieske Part No. 1989435
Mfg Part No 9208100
EAN-Code 4028177952126
Manufacturer Rittal
Here only 639,98 EUR
761,58 EUR incl. VAT

Further information for Rittal 9208100 KE 9208100 Ex enclosure 600x800x300 mm

General
ModelEx enclosure
ApplicationsZone 1 and 2 or 21 and 22 according to 2014/34/EU, ambient temperature range: -40 °C...+70 °C, the specified temperatures may be limited by installed devices, protection type according to EN 60 079: device protection by increased safety (Ex e), device protection by enclosure (Ex tb)
MaterialHousing: glass-fibre-reinforced unsaturated polyester, surface resistance: < 10⁹ Ω, door: glass-fibre-reinforced unsaturated polyester, surface resistance: < 10⁹ Ω, continuously bonded silicone seal, mounting plate: sheet steel, zinc-coated
ColourRAL 9011
Scope of deliveryhousing, door, mounting plate
Width600 mm
Height800 mm
Depth300 mm
Mounting plate dimensions (W x H)505 mm x 725 mm
Mounting plate material thickness3 mm
LockNumber of locks: 3
Degree of protection IP according to IEC 60 529IP 65
NEMA degree of protectionType 1, Type 3R, Type 3RX, Type 4, Type 4X, Type 12
IK codeIK09
Operating temperature range-40 °C...70 °C
Operation temperatureThe specified temperatures may be limited by the installed devices
Certificate IEC EX PTB 10.0011UJa
Certificate PTB 03 ATEX 1011UJa
The Rittal KE 9208100 is an Ex enclosure made of glass-fibre-reinforced, unsaturated polyester, designed for use in explosive atmospheres. It is approved for Zone 1 and 2 as well as Zone 21 and 22 according to Directive 2014/34/EU and provides protection through increased safety (Ex e) and through the enclosure (Ex tb) in accordance with EN 60 079. The enclosure is designed as an empty enclosure with hinged door and is suitable for use in industrial plants where high mechanical and electrical safety is required. Dimensions are 600 mm width, 800 mm height, and 300 mm depth, with the mounting plate measuring 505 mm × 725 mm and made of galvanised steel sheet with a material thickness of 3 mm.

Applications
This enclosure is designed for use in explosive environments, particularly in areas classified as Zone 1, 2, 21 or 22 according to the ATEX Directive 2014/34/EU. The operating temperature range is from -40 °C to +70 °C, although the actual operating temperature may be limited by the installed devices. The materials are temperature-resistant and self-extinguishing according to UL 94 V-0, enhancing safety at elevated temperatures and in the event of fire.

Functions and Equipment in Detail
The enclosure features a continuous silicone seal bonded around the perimeter, ensuring a tight seal. The door is fitted with a 130° stainless steel hinge, allowing an opening angle of 130°. The door swing direction is reversible from left to right. Integrated door stops are located at the top and bottom of the door, enabling secure guidance and positioning. The mounting plate includes grounding keyhole slots, enabling a secure electrical connection.

Technology Explained Simply
The enclosure is made from a single piece of impact-resistant, glass-fibre-reinforced, unsaturated polyester, providing high mechanical strength and resistance to external influences. The surface resistances of the enclosure and door are below 10⁹ Ω, enhancing electrical safety. The protection rating IP 65 according to IEC 60 529 ensures dust-tight and splash-proof protection, while NEMA protection ratings Type 1, 3R, 3RX, 4, 4X and 12 enable broad application in various environments. The IK code IK09 indicates high mechanical resistance against mechanical impacts.

Compatibility and Accessories
Various accessories are available for this enclosure, including wall mounting brackets for AX plastic in RAL 9011, door latches, universal brackets, and plastic screws for internal installation. These components enable flexible mounting and adaptation to specific requirements in industrial applications.

Mounting and Installation
The enclosure is equipped with a mounting plate that allows secure attachment to walls or other substructures. Integrated mounting bosses in the enclosure and on the door facilitate internal installation and device mounting. QR codes on the enclosure, door, mounting plate, and nameplate enable unique identification and easy access to relevant product information and documentation.

Operational Advantages
The enclosure offers high mechanical and electrical safety, is temperature-resistant and self-extinguishing. The continuous silicone seal and integrated door stops ensure a tight and secure door guidance. Approvals according to ATEX and IECEx, along with protection ratings IP 65 and IK09, make the enclosure suitable for demanding industrial applications. The mounting plate with grounding keyhole slots and integrated mounting elements simplify installation and internal assembly.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1989435
qrcode für Rittal 9208100 KE 9208100 Ex enclosure 600x800x300 mm