Rittal 9204100, EAN: 4028177952089

Rittal 9204100 KE 9204100 Ex enclosure 400x400x200 mm

Industrial Material > Enclosures / Chassis > Enclosures

Rittal 9204100 KE 9204100 Ex enclosure 400x400x200 mm

Lieske Part No. 1989431
Mfg Part No 9204100
EAN-Code 4028177952089
Manufacturer Rittal
Here only 248,29 EUR
295,47 EUR incl. VAT

Further information for Rittal 9204100 KE 9204100 Ex enclosure 400x400x200 mm

General
ModelEx enclosure
ApplicationsZone 1 and 2 or 21 and 22 according to 2014/34/EU, ambient temperature range: -40 °C...+70 °C, the specified temperatures may be limited by installed devices, protection type according to EN 60 079: device protection by increased safety (Ex e), device protection by enclosure (Ex tb)
MaterialHousing: glass-fibre-reinforced unsaturated polyester, surface resistance: < 10⁹ Ω, door: glass-fibre-reinforced unsaturated polyester, surface resistance: < 10⁹ Ω, continuously bonded silicone seal, mounting plate: sheet steel, zinc-coated
ColourRAL 9011
Scope of deliveryhousing, door, mounting plate
Width400 mm
Height400 mm
Depth200 mm
Mounting plate dimensions (W x H)305 mm x 325 mm
Mounting plate material thickness2,5 mm
LockNumber of locks: 2
Degree of protection IP according to IEC 60 529IP 65
NEMA degree of protectionType 1, Type 3R, Type 3RX, Type 4, Type 4X, Type 12
IK codeIK09
Operating temperature range-40 °C...70 °C
Operation temperatureThe specified temperatures may be limited by the installed devices
Certificate IEC EX PTB 10.0011UJa
Certificate PTB 03 ATEX 1011UJa
The Rittal KE 9204100 is an Ex enclosure made of glass-fibre-reinforced, unsaturated polyester, designed for use in explosive atmospheres. It is approved for Zone 1 and 2 as well as Zone 21 and 22 according to Directive 2014/34/EU and provides protection through increased safety (Ex e) and enclosure protection (Ex tb) in accordance with EN 60 079. The enclosure is supplied as an empty housing with a hinged door and is intended for mounting electrical or electronic components in hazardous environments. Dimensions are 400 mm (width) × 400 mm (height) × 200 mm (depth), with the specified operating temperature range of -40 °C to +70 °C potentially limited by installed components.

Applications
This enclosure is designed for use in explosive atmospheres, particularly in industrial plants, petrochemical facilities, gas supply systems, and other environments where flammable gases, vapours, or dusts may be present. Approval for Zone 1 and 2 (gaseous explosive atmospheres) and Zone 21 and 22 (dust explosive atmospheres) makes it suitable for applications requiring high safety standards. The operating temperature range of -40 °C to +70 °C allows use in various climatic regions, although the actual temperature limit may be influenced by components installed in the enclosure.

Functions and Equipment in Detail
The enclosure consists of a single-piece, impact-resistant plastic body made of glass-fibre-reinforced, unsaturated polyester, which is self-extinguishing according to UL 94 V-0. The door is fitted with a continuous silicone seal bonded around the perimeter, ensuring a tight seal. The door is equipped with a 130° stainless steel hinge, providing an opening angle of 130°. The door swing direction is reversible from left to right. Integrated door stops at the top and bottom of the door ensure secure seating. The mounting plate, made of galvanised steel sheet (2.5 mm thickness), features grounding holes and allows for the attachment of internal components.

Technology Explained Simply
The protection type Ex e (increased safety) means the enclosure is designed to prevent sparks or hot surfaces that could ignite an explosive atmosphere. The protection type Ex tb (enclosure protection) ensures the enclosure itself acts as a barrier against explosion propagation. Surface resistances of < 10⁹ Ω on the enclosure and door prevent the build-up of static electricity, which is critical in explosive environments. The IP rating IP 65 according to IEC 60 529 protects against dust and splashing water, making the enclosure suitable for outdoor use. NEMA ratings Type 1, 3R, 3RX, 4, 4X, and 12 cover various environmental conditions, from indoor to outdoor use, including protection against splashing water and dust. The IK code IK09 indicates high mechanical strength against impact and shock.

Compatibility and Accessories
Various accessories are available for use with the enclosure, including wall mounting brackets for AX plastic in RAL 9011, door latches, universal brackets, and plastic screws for internal installation. These components allow flexible mounting and adaptation to specific requirements. The mounting plate features mounting bosses that ensure secure attachment of internal components.

Mounting and Installation
The enclosure is delivered with a mounting plate that enables secure attachment to walls or other structures. Integrated mounting bosses in the enclosure body and on the door facilitate internal installation. The door can be mounted in either direction, allowing flexible installation at different locations. The seal and hinges are designed to ensure a tight and stable closure.

Operational Advantages
The enclosure offers high mechanical strength (IK09), resistance to environmental influences (IP 65, NEMA Type 4X), and suitability for use in explosive atmospheres. The materials are temperature-resistant and self-extinguishing, enhancing safety. Integrated mounting elements and the mounting plate simplify installation and internal assembly. Approvals according to ATEX and IECEx, along with certificates PTB 03 ATEX 1011U and IEC EX PTB 10.0011U, guarantee compliance with applicable safety standards. A printed QR code on the enclosure, door, and mounting plate enables unique identification and easy access to relevant product information and documentation.

The enclosure is available in the colour RAL 9011 (Grey) and is delivered with enclosure, door, and mounting plate. The material thickness of the enclosure and door is 3 mm, while the mounting plate is 2.5 mm thick. The IP 65 protection rating and NEMA classification ensure high protection against dust and water, making the enclosure suitable for use in humid or dusty environments. Approvals for Zone 1/2 and 21/22 make it an appropriate protective enclosure for critical applications in hazardous areas.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1989431
qrcode für Rittal 9204100 KE 9204100 Ex enclosure 400x400x200 mm