| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Suitable for | housing type: GA, height: ≥ 230 mm |
| PCF/VE (Cradle-to-Gate) | 1.1 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
Rittal GA wall mounting bracket, type GA 9121230, is a system accessory for the external mounting of GA enclosures to walls or other surfaces. It enables the installation of the enclosure without removing the cover, provided the bracket is already attached to the enclosure prior to mounting. This is particularly advantageous in installations where access to the interior of the enclosure is not required after mounting. The bracket is specifically designed for enclosures of type GA with a minimum height of 230 mm. The material consists of
steel sheet, coated with a
zinc-plated surface to prevent corrosion and ensure a longer service life in industrial applications.
Applications
The wall mounting bracket is used in industrial plants, electrical installations, and machine building, where enclosures need to be mounted to walls or supporting surfaces. It is suitable for applications requiring secure and durable mounting without the need to open the enclosure cover after installation. The bracket is intended for indoor use, with the zinc-plated surface providing resistance against moisture and minor corrosive influences.
Functions and equipment in detail
The bracket is designed to be directly attached to the enclosure and then mounted to a wall or other supporting surface. It is designed for enclosures with a minimum height of 230 mm, ensuring secure anchoring. The zinc plating of the surface protects the steel sheet from rust and increases the accessory’s lifespan in damp or slightly corrosive environments.
Technology explained simply
The wall mounting bracket is made of robust steel sheet, protected against oxidation by zinc plating. The zinc plating is a galvanic layer that protects the metal from moisture and humidity. The bracket is attached to the front of the GA enclosure and enables secure mounting to a wall. Installation is performed without removing the cover, speeding up the process and reducing labor. The bracket is designed for a minimum enclosure height of 230 mm to ensure sufficient stability and load-bearing capacity.
Compatibility and accessories
The bracket is specifically designed for GA enclosures with a minimum height of 230 mm. It is not suitable for smaller enclosures with a height below 230 mm. Use with other enclosure types is not intended. There are no specific accessories that must be combined with this bracket.
Mounting and installation
The wall mounting bracket is first attached to the enclosure before mounting it to the wall. Installation is performed without removing the cover, speeding up the process. The enclosure is then mounted to the wall, with the bracket providing the connection between enclosure and wall. Installation does not require special tools, but screws and a screwdriver are required.
Individual specifications such as the net weight of 0.26 kg or the gross weight of 0.287 kg are technical data relevant for logistics and storage, but not directly critical for the product’s operation. The packaging unit is 2 pieces, which should be considered for ordering and storage.
Advantages in operation
The wall mounting bracket enables quick and secure mounting of GA enclosures to walls without removing the cover. This reduces labor and installation time. The zinc-plated surface ensures longer service life and resistance to corrosion. The bracket is specifically designed for GA enclosures with a minimum height of 230 mm, ensuring stable and secure mounting. Use of the bracket is simple and does not require special tools or additional components.
The product description is based exclusively on information from the manufacturer’s sources.