| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Suitable for | Housing type: GA, height: = 160 mm |
| PCF/VE (Cradle-to-Gate) | 0.9 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal GA 9121160 is a
wall mounting bracket for enclosures of type GA, specifically designed for housings with a height of 160 mm. It ensures secure and permanent mounting of the enclosure to a wall or other load-bearing surface. The bracket allows for external mounting, where the fastening can be carried out before installing the enclosure – this avoids the need to remove the housing cover afterwards, reducing installation time and simplifying the workflow.
Applications
The wall mounting bracket is used in industrial and technical installations where GA-type enclosures must be mounted on walls or vertical surfaces. It is particularly suitable for applications in production halls, machine building, automation technology, or during the installation of control and distribution enclosures, where stable and quick mounting is required. The bracket is designed for use with GA enclosures that have an exact height of 160 mm.
Functions and Equipment in Detail
The bracket is made of
sheet steel and features a
zinc-coated surface, ensuring high corrosion resistance and long service life. The zinc coating protects the material from moisture and environmental influences, which is especially beneficial in industrial environments. The fastening is carried out on the outside of the enclosure, allowing installation without removing the cover. This is particularly advantageous when the enclosure is already fitted with internal components.
Technology Explained Simply
The wall mounting bracket is a mechanical component that transfers the weight of the enclosure to the wall. It is attached to the designated mounting points on the GA enclosure and then screwed to the wall. The use of sheet steel ensures sufficient strength to safely support the weight of the enclosure. The zinc-coated surface provides additional protection against oxidation and extends the component’s service life.
Compatibility and Accessories
The bracket is exclusively intended for enclosures of type GA with a height of 160 mm. It is not suitable for other housing types or heights. The packaging unit contains 2 pieces, enabling the installation of two enclosures or securing a single enclosure at two points.
Mounting and Installation
Installation is carried out by attaching the bracket to the designated mounting points on the housing. The bracket is fastened to the wall using the included screws or suitable fastening elements. The pre-mounted fastening allows for quick and secure installation without needing to open the enclosure cover. The installation is intended for professionals in electrical and mechanical engineering who have the necessary tools and knowledge.
Advantages in Operation
The wall mounting bracket reduces installation time, as no removal of the cover is required. The use of zinc-coated sheet steel ensures high mechanical strength and corrosion resistance, increasing reliability and service life. The bracket is easy to handle and enables secure mounting of the enclosure to the wall, ensuring stability and safety of the installation. The packaging unit with 2 pieces offers flexibility for mounting multiple enclosures or securing at two points for additional stability.