Rittal 8807020, EAN: 4028177924468

Rittal 8807020 enclosure 800x2000x800 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 8807020 enclosure 800x2000x800 mm

Lieske Part No. 1908941
Mfg Part No 8807020
EAN-Code 4028177924468
Manufacturer Rittal
Here only 1.191,40 EUR
1.417,77 EUR incl. VAT

Further information for Rittal 8807020 enclosure 800x2000x800 mm

General
ModelEMC version
MaterialCabinet frame: steel sheet with zinc-magnesium coating, 1.5 mm, roof: steel sheet with zinc-magnesium coating, 1.5 mm, door: steel sheet with zinc-magnesium coating, 2.0 mm, rear panel: steel sheet with zinc-magnesium coating, 1.5 mm, base plates: steel sheet, 1.5 mm, mounting plate: steel sheet, 3.0 mm
Surface protectionCabinet frame: bare, door, rear panel and roof: externally painted and internally unpainted, base plates: galvanised, mounting plate: galvanised
ColourRAL 7035
Scope of deliveryCabinet frame, door(s), door hinge right, reversible to left, rear panel, roof sheet, base sheets, mounting plate, lock: 3 mm double bar, 2 mounting rails 18 x 39 mm
Degree of protection IP according to EN 60 529IP 55
NEMA degree of protectionNEMA 1, NEMA 12
Type rating according to UL 50EType 1, Type 12
Width800 mm
Height2.000 mm
Depth800 mm
Number of doors1
NoteEMC shielding gasket required for adjacent cabinets
PCF/VE (Cradle-to-Gate)332.6 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX bayed enclosure system, type 8807020, is an industrial enclosure in EMC version with dimensions width 800 mm, height 2,000 mm and depth 800 mm. It is designed for housing and protecting electrical and electronic components in industrial installations, particularly in environments with increased electromagnetic compatibility requirements. The enclosure is made of steel sheet with zinc-magnesium coating, where the door has a wall thickness of 2.0 mm, while the enclosure frame, roof, rear panel and base sheets are each 1.5 mm thick. The mounting plate is made of 3.0 mm thick steel sheet. The surface of the enclosure frame is bare, while the door, rear panel and roof are painted on the outside and unpainted on the inside. The base sheets and mounting plate are galvanized. The colour of the enclosure is RAL 7035.

Applications
This enclosure system is designed for use in industrial environments where high electromagnetic compatibility (EMC) is required. The EMC version ensures effective HF attenuation, which is particularly beneficial when installing sensitive electronic devices or in environments with strong electromagnetic interference. The protection rating IP 55 according to EN 60 529 protects against dust and splashing water, enabling use indoors and in slightly damp outdoor areas. The NEMA classification includes NEMA 1 and NEMA 12, as well as Type ratings Type 1 and Type 12 according to UL 50E, confirming suitability for dry and slightly soiled indoor environments.

Functions and Equipment in Detail
The enclosure system is delivered with a right-hand door hinge, which can be changed to left-hand. It features a single door equipped with a 3 mm double-barrel lock. The delivery scope also includes the enclosure frame, rear panel, roof plate, base sheets, mounting plate, and two mounting rails with dimensions 18 x 39 mm. The mounting rails enable the attachment of enclosures and other components inside the enclosure. The door is designed for secure and reliable locking, with the double-barrel locking mechanism providing high mechanical stability.

Technology Explained Simply
The EMC version of the enclosure ensures high HF attenuation, meaning electromagnetic interference acting on the enclosure from inside or outside is effectively shielded. This is particularly important in installations where sensitive controls, frequency converters or other electronic components are operated. The protection rating IP 55 means the enclosure is dust-tight and protected against splashing water, ensuring high reliability in industrial environments. The use of steel sheet with zinc-magnesium coating ensures good corrosion resistance and long service life.

Compatibility and Accessories
The enclosure system is designed for baying with additional VX enclosures. When baying enclosures, an EMC shielding gasket is required to ensure electromagnetic shielding between the units. Suitable accessories include mounting brackets, circuit diagram pockets, SZ rails for EMC, EMC side panels, mounting plate spacers, dust protection strips, TFT/monitor brackets, comfort handles, transport eyes, covers for baying, and system chassis in various sizes. These components enable flexible and application-specific equipping of the enclosure.

Mounting and Installation
Mounting is done via the integrated mounting rails and the mounting plate. The enclosure components are designed to be installed without additional tools or mounting aids. The door is changeable to left-hand, allowing flexible adaptation to the respective installation situation. The base sheets ensure stable fixation to the floor. When baying multiple enclosures, correct installation of the EMC shielding gasket must be ensured to maintain electromagnetic shielding.

Operational Advantages
The enclosure system offers high mechanical stability and reliable shielding against electromagnetic interference. The protection rating IP 55 ensures high operational safety in damp and dusty environments. The use of steel sheet with zinc-magnesium coating ensures long service life and high corrosion resistance. The modular equipping option with various accessories enables flexible adaptation to different requirements in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1908941
qrcode für Rittal 8807020 enclosure 800x2000x800 mm