| General |
| Material | Stainless steel 1.4301 (AISI 304) |
| Surface protection | Linear grind, grit 400 |
| Scope of delivery | Including mounting hardware |
| Type rating according to UL 50E | Type 1, Type 3R, Type 4, Type 4X, Type 12 |
| Suitable for | housing type: VX, width: 800 mm, depth: 600 mm |
The Rittal VX protective roof, type VX 8806455, is an accessory for industrial enclosures of the VX system. It provides protection for enclosures with a width of 800 mm and a depth of 600 mm. The protective roof features a sloped design that deflects standing moisture and contamination from above, thereby protecting the interior of the enclosure from unwanted humidity and dirt. It is made of
stainless steel 1.4301 (AISI 304), a material known for its high corrosion resistance and mechanical strength in industrial environments. The surface is finished with a
brushed finish, grit 400, resulting in a uniform, easy-to-clean, and aesthetically pleasing surface.
Applications
The protective roof is designed for use in industrial installations where enclosures must be protected from external influences such as precipitation, dust, or splashing water. It is particularly suitable for outdoor installations or areas with high humidity, where avoiding standing water on the enclosure is important. The sloped shape ensures that rainwater runs off quickly and does not remain on the roof.
Functions and equipment in detail
The protective roof is specifically designed for VX enclosures with dimensions of 800 mm width and 600 mm depth. It is mounted directly onto the enclosure and secures its top surface. The delivery includes the protective roof and
fastening material required for installation. The fastening is done via designated mounting points on the enclosure, with the included material providing the necessary connection.
Technology explained simply
The use of
stainless steel 1.4301 (AISI 304) ensures high resistance to atmospheric corrosion, which is particularly advantageous in humid or slightly aggressive environments. The surface treatment with brushed finish grit 400 provides a uniform, easy-to-clean, and visually appealing surface. The sloped shape of the roof is designed to allow rainwater to drain quickly, preventing accumulation on the surface, which extends the enclosure’s service life.
Compatibility and accessories
The protective roof is specifically designed for VX enclosures with dimensions of 800 mm width and 600 mm depth. It is compatible with the VX enclosure type. As a suitable accessory, the side panel VX 8106460 is offered, which is also designed for VX protective roofs with a depth of 600 mm. The combination of both parts enables complete coverage of the side and top surfaces of the enclosure, further enhancing the protective function.
Installation and mounting
Mounting is done directly onto the VX enclosure. The included fastening material is attached to the designated mounting points on the enclosure, securing the protective roof in place. Installation is simple and can be carried out without special expertise.
Operational benefits
The protective roof reduces the risk of moisture ingress and contamination inside the enclosure, increasing the reliability of the installed electrical components. The use of stainless steel ensures long service life and low maintenance. The sloped shape supports natural drainage of rainwater, minimizing the risk of damage from standing water. The surface finish facilitates cleaning and contributes to a professional appearance.
Type rating according to UL 50E
The protective roof meets the requirements of the UL 50E standard in categories Type 1, Type 3R, Type 4, Type 4X, and Type 12. These approvals refer to protection against dust, splashing water, dirt, and other external influences. The Type 4X approval refers to protection against splashing water and dust, allowing the protective roof to be used in humid or dusty environments. The Type 12 approval refers to protection against dust and splashing water, expanding its application possibilities in industrial installations.
The product is available in a packaging unit of 1 piece. The net weight is 11 kg, the gross weight is 11.5 kg. The customs tariff number is 94039910.