| General |
| Material | Cabinet frame: steel sheet, 1.5 mm, roof: steel sheet, 1.5 mm, door: steel sheet, 2.0 mm, rear panel: steel sheet, 1.5 mm, base plates: steel sheet, 1.5 mm, mounting plate: steel sheet, 3.0 mm |
| Surface protection | Cabinet frame: dip-primed, door, roof and rear panel: dip-primed, externally powder-coated, textured lacquer, mounting plate and base sheets: galvanised |
| Colour | RAL 7035 |
| Scope of delivery | cabinet frame, door(s), door hinge right, reversible to left, roof sheet, rear panel, floor sheets, mounting plate, 2 mounting rails 18 x 39 mm, lock: 3 mm double bar |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 500 mm |
| Mounting plate dimensions (W x H) | 699 mm x 1.896 mm |
| Degree of protection IP according to EN 60 529 | IP 55 |
| NEMA degree of protection | NEMA 1, NEMA 12 |
| Type rating according to UL 50E | Type 1, Type 12 |
| IK code | IK10 |
| Number of doors | 1 |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 346.31 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 8805.000 is a bayed enclosure system made of sheet steel, designed for use in industrial environments. It features dimensions of width 800 mm, height 2,000 mm, and depth 500 mm, and is designed as a single-door model on the front side. The enclosure system serves as a base housing for mounting switchgear, controls, and other electrical components, enabling a structured, space-saving internal layout. The construction is based on a symmetrical profile frame with integrated mounting levels accessible from both inside and outside, allowing for efficient installation of components.
Applications
This enclosure system is suitable for use in production plants, automation technology, power supply systems, and other industrial applications where high mechanical load capacity and protection against dust and splashing water are required. The protection rating IP 55 according to EN 60 529 ensures effective protection against dust and splashing water, making it suitable for outdoor areas or damp indoor spaces. The NEMA classification includes NEMA 1 and NEMA 12, confirming suitability for dry indoor environments as well as environments with minor contamination risks. The type rating according to UL 50E includes Type 1 and Type 12, demonstrating compliance with North American safety standards. The IK code IK10 indicates high mechanical strength against mechanical impacts such as shocks or vibrations.
Functions and Equipment in Detail
The enclosure system consists of a cabinet frame made of sheet steel with a wall thickness of 1.5 mm, a door made of 2.0 mm sheet steel, a roof, a rear panel, and floor sheets, also made of 1.5 mm sheet steel. The mounting plate is made of 3.0 mm sheet steel and provides a stable base for mounting components. The surface of the cabinet frame is dip-primed, while the door, roof, and rear panel are powder-coated externally, using a textured lacquer in the colour RAL 7035. The mounting plate and floor sheets are galvanized to ensure corrosion protection. The door is fitted with a PU foam seal and features a four-point locking rod lock with a double-bar insert according to DIN 43668. The door hinges are tool-free reversible from right to left, and the door opening angle is 130°, with a tool-free extension to 180° possible. The clearance height is 17 mm.
Technology Explained Simply
The construction of the enclosure system allows for flexible mounting of components. The mounting plate is depth-adjustable in 25 mm increments and is positioned using integrated plastic glides and reusable mounting rails. The entire construction features a hole pattern in a 25 mm grid, enabling the mounting of cage nuts and metric screws up to M8. The rear panel, roof, and floor sheets are conductively connected to the frame, ensuring automatic equipotential bonding according to DIN 62 208. The floor sheets are divided into three parts, removable and replaceable, facilitating maintenance and cleaning. The enclosure system is load-bearing up to 15,000 N.
Compatibility and Accessories
The enclosure system is compatible with various accessories that meet individual requirements for switchgear. These include circuit diagram pockets for various sub-assemblies, levelling feet with an adjustment height of 18–43 mm, cable routing spaces, mounting platforms for the external mounting level, C-profile rails, transport eyes, mounting plate spacers, dust protection strips, TFT/monitor holders, comfort handles, cable entry ferrules in various diameters, multi-locking mechanisms, plug-through ferrules, multitools, and system chassis. These components enable application-specific adaptation of the enclosure system.
Mounting and Installation
Mounting is performed via the integrated mounting grid and the hole pattern in a 25 mm grid. The mounting plate is depth-adjustable, allowing for optimal positioning of components. The floor sheets are removable, facilitating installation on the floor. The door hinges are reversible, allowing the door to be mounted on the left or right side as needed. The cabinet construction is designed for baying on all sides, enabling flexible arrangement in rows or blocks.
Advantages in Operation
The enclosure system offers high mechanical stability, efficient internal layout, and easy maintenance. The integrated mounting plate and depth-adjustable mounting rails allow flexible adaptation to different components. The conductive connection of flat parts to the frame ensures safe equipotential bonding. The protection rating IP 55 and IK10 rating ensure reliable operation in demanding environments. The tool-free adjustment of the door opening angle and reversible door hinges increase flexibility during installation and maintenance.