Rittal 8660110, EAN: 4028177984837

Rittal 8660110 VX Transport Roller

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 8660110 VX Transport Roller

Lieske Part No. 682794
Mfg Part No 8660110
EAN-Code 4028177984837
Manufacturer Rittal
Here only 195,04 EUR
232,10 EUR incl. VAT

Further information for Rittal 8660110 VX Transport Roller

General
ColourRAL 9005
Scope of delivery4 double swivel castors, 2 x with, 2 x without brake
Clearance from floor100 mm
Load capacityMax. dynamic load with use of 4 double swivel castors (single cabinet): 3000 N
Weight/PU8,63 kg
The Rittal VX 8660110 is a castor for the VX plinth system, specifically designed for use with enclosures and industrial housings. The product consists of four double swivel castors, delivered in a pack of four. The wheels are made of sheet steel and finished in RAL 9005, ensuring a uniform visual appearance with other components of the VX system. The castor is intended for insertion into plinth corner brackets at heights of 100 or 200 mm, allowing flexible mounting at various plinth heights.

Castor
The VX 8660110 enables mobile positioning of enclosures and similar units. The brakes ensure that the enclosure can be secured when required, providing safe stability. The ground clearance is 100 mm, sufficient to move the enclosure over uneven or slightly textured floor surfaces without the wheels jamming.

Load capacity and application
The maximum dynamic load capacity when using four double swivel castors is 3000 N. This corresponds to a load of approximately 306 kg, which is sufficient for transporting individual enclosures in industrial environments. The wheels are designed for use in production environments where frequent movement of equipment is required. The construction from sheet steel ensures high mechanical stability and durability under load.

Compatibility and accessories
The castor is specifically developed for the VX plinth system and is attached to plinth corner brackets at heights of 100 mm or 200 mm. It is therefore compatible with the corresponding VX plinth components. The use of four wheels enables even load distribution and facilitates maneuvering of the enclosure. The combination of two wheels with and two without brakes offers flexibility in mounting and use, depending on whether the enclosure needs to be secured or moved during operation.

Mounting and installation
Mounting is done by inserting the wheels into the designated openings of the plinth corner brackets. No additional fastening or tools are required, as the wheels are mechanically inserted into the plinth components. Installation is therefore quick and can be performed without special tools, reducing mounting time and simplifying maintenance.

Operational advantages
The use of the VX 8660110 enables simple and safe movement of enclosures, especially during maintenance, relocations, or commissioning. The brakes ensure secure fixation once the enclosure has reached the desired position. The robust construction from sheet steel and high load capacity guarantee long service life even under industrial conditions. The RAL 9005 finish ensures visual consistency with other VX components.

The castor is available in a pack of four, with a weight per pack of 8.63 kg. The wheels are designed for indoor use, with a ground clearance of 100 mm allowing movement over slightly uneven surfaces. Technical specifications are tailored to industrial requirements, with load capacity and ease of installation being key priorities.

Double swivel castors
The double swivel castors allow flexible steering of the enclosure, enabling navigation of tight curves and confined work areas. The combination of swivel and brake functions provides an optimal balance between mobility and stability. The wheels are designed to remain stable under dynamic load while enabling smooth rolling.

Sheet steel
The use of sheet steel as material for the wheels ensures high mechanical strength and resistance to wear. The material is suitable for industrial environments where high loads and frequent movement occur. The surface is painted in RAL 9005, providing uniform color and corrosion protection.

VX plinth system
The castor is part of the VX plinth system, developed for mounting and positioning of enclosures. The system enables modular and flexible design of enclosure solutions, with the castor being an important component for mobility. Compatibility with plinth corner brackets at heights of 100 mm and 200 mm ensures universal applicability within the VX system.

Brakes
The brakes on two of the four wheels allow secure fixation of the enclosure once it has reached the desired position. This is particularly important during maintenance or commissioning to prevent unintended movement. The brakes are mechanically operated and provide reliable locking.

Load capacity
The maximum dynamic load of 3000 N is designed for transporting individual enclosures. This load capacity is sufficient for typical industrial applications where enclosures are equipped with electrical or electronic components. Load distribution over four wheels ensures even load sharing and prevents overloading of individual wheels.

Ground clearance
The ground clearance of 100 mm allows the enclosure to be moved over slightly uneven or textured floor surfaces without the wheels jamming. This is particularly useful in production environments where the floor is not always perfectly flat. The ground clearance is sufficient to ensure safe and smooth movement.

Packaging unit
The castor is delivered in a pack of four, with a weight per pack of 8.63 kg. The packaging unit is dimensioned to safely transport the four wheels and also facilitate installation. Delivery is in a unit that can be used directly for mounting.

Insertion into plinth corner bracket
Mounting is done by inserting the wheels into the designated openings of the plinth corner brackets. No additional fastening or tools are required, as the wheels are mechanically inserted into the plinth components. Installation is therefore quick and can be performed without special tools, reducing mounting time and simplifying maintenance.

RAL 9005
The RAL 9005 finish ensures visual consistency with other VX components. The color is a dark black, which integrates well into industrial environments and provides a professional appearance. The paint finish also offers some corrosion protection, extending the service life of the wheels.

Dynamic load
The dynamic load of 3000 N refers to the maximum load acting on the wheels when moving the enclosure. This load is designed for use in industrial environments where frequent movement of equipment is required. The wheels are constructed to remain stable under dynamic load while enabling smooth rolling.

Plinth corner bracket
The castor is attached to plinth corner brackets at heights of 100 mm or 200 mm. The plinth corner brackets are part of the VX system and serve as mounting points for the wheels. Compatibility with these corner brackets ensures universal applicability within the VX system.

Stability
The construction of the double swivel castors and the use of sheet steel ensure high stability under load. The wheels are designed to prevent bending or failure under dynamic load. Even load distribution over four wheels prevents overloading of individual components.

Easy mounting
Mounting is done by inserting the wheels into the plinth corner brackets, requiring no additional tools or fasteners. Installation is therefore quick and simple, reducing mounting time and simplifying maintenance. The wheels are designed to securely fit in the plinth corner bracket and will not fall out.

Industrial use
The castor is designed for use in industrial environments where high loads and frequent movement occur. The robust construction from sheet steel and high load capacity guarantee long service life even under demanding conditions. The wheels are suitable for use in production environments where enclosures must be moved regularly.

Brakes
The brakes on two of the four wheels allow secure fixation of the enclosure once it has reached the desired position. This is particularly important during maintenance or commissioning to prevent unintended movement. The brakes are mechanically operated and provide reliable locking.

Double swivel castors
The double swivel castors allow flexible steering of the enclosure, enabling navigation of tight curves and confined work areas. The combination of swivel and brake functions provides an optimal balance between mobility and stability. The wheels are designed to remain stable under dynamic load while enabling smooth rolling.

Sheet steel
The use of sheet steel as material for the wheels ensures high mechanical strength and resistance to wear. The material is suitable for industrial environments where high loads and frequent movement occur. The surface is painted in RAL 9005, providing uniform color and corrosion protection.

VX plinth system
The castor is part of the VX plinth system, developed for mounting and positioning of enclosures. The system enables modular and flexible design of enclosure solutions, with the castor being an important component for mobility. Compatibility with plinth corner brackets at heights of 100 mm and 200 mm ensures universal applicability within the VX system.

Load capacity
The maximum dynamic load of 3000 N is designed for transporting individual enclosures. This load capacity is sufficient for typical industrial applications where enclosures are equipped with electrical or electronic components. Load distribution over four wheels ensures even load sharing and prevents overloading of individual wheels.

Ground clearance
The ground clearance of 100 mm allows the enclosure to be moved over slightly uneven or textured floor surfaces without the wheels jamming. This is particularly useful in production environments where the floor is not always perfectly flat. The ground clearance is sufficient to ensure safe and smooth movement.

Packaging unit
The castor is delivered in a pack of four, with a weight per pack of 8.63 kg. The packaging unit is dimensioned to safely transport the four wheels and also facilitate installation. Delivery is in a unit that can be used directly for mounting.

Insertion into plinth corner bracket
Mounting is done by inserting the wheels into the designated openings of the plinth corner brackets. No additional fastening or tools are required, as the wheels are mechanically inserted into the plinth components. Installation is therefore quick and can be performed without special tools, reducing mounting time and simplifying maintenance.

RAL 9005
The RAL 9005 finish ensures visual consistency with other VX components. The color is a dark black, which integrates well into industrial environments and provides a professional appearance. The paint finish also offers some corrosion protection, extending the service life of the wheels.

Dynamic load
The dynamic load of 3000 N refers to the maximum load acting on the wheels when moving the enclosure. This load is designed for use in industrial environments where frequent movement of equipment is required. The wheels are constructed to remain stable under dynamic load while enabling smooth rolling.

Plinth corner bracket
The castor is attached to plinth corner brackets at heights of 100 mm or 200 mm. The plinth corner brackets are part of the VX system and serve as mounting points for the wheels. Compatibility with these corner brackets ensures universal applicability within the VX system.

Stability
The construction of the double swivel castors and the use of sheet steel ensure high stability under load. The wheels are designed to prevent bending or failure under dynamic load. Even load distribution over four wheels prevents overloading of individual components.

Easy mounting
Mounting is done by inserting the wheels into the plinth corner brackets, requiring no additional tools or fasteners. Installation is therefore quick and simple, reducing mounting time and simplifying maintenance. The wheels are designed to securely fit in the plinth corner bracket and will not fall out.

Industrial use
The castor is designed for use in industrial environments where high loads and frequent movement occur. The robust construction from sheet steel and high load capacity guarantee long service life even under demanding conditions. The wheels are suitable for use in production environments where enclosures must be moved regularly.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/682794
qrcode für Rittal 8660110 VX Transport Roller