| General |
| Material | Socket corner piece: sheet steel, socket front/rear cover: sheet steel, corner and gang cover: plastic |
| Colour | RAL 9005 |
| Scope of delivery | 4 corner covers, including fastening material, 4 base corner pieces, 200 mm high, 1 base panel front/back, 200 mm, 2 base panels front/back, 100 mm |
| Note | Socket inserts, side-mounted, serve to terminate a socket unit or for additional stabilization between sockets or for internal fitting of sockets |
| Height | 200 mm |
| Suitable for | Cabinet type: VX, VX IT, VX SE, TX CableNet, TS, TS IT, TP, PC, IW, CX, width: = 800 mm |
| Type rating according to UL 50E | Type 1, Type 12 |
| Weight/PU | 8,68 kg |
| PCF/VE (Cradle-to-Gate) | 30.51 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 8660023 is a plinth corner piece with integrated front and rear plinth trim panels, specifically designed for enclosures and housings of the VX system with a width of 800 mm. It serves as a stable termination for plinth units and enables a clean, flush connection between multiple baying positions. The component consists of sheet steel for the corner pieces and front/rear trim panels, while the corner and baying covers are made of plastic. The color is RAL 9005, a dark gray standard shade that blends well in industrial environments. The height is 200 mm, allowing universal adaptation to various enclosure heights.
Applications
The plinth corner piece is suitable for a wide range of housing types, including VX, VX IT, VX SE, TX CableNet, TS, TS IT, TP, PC, IW, and CX, provided the width is 800 mm. It is used in industrial plants, automation technology, and IT infrastructures where stable and aesthetically pleasing plinth fixation is required. The trim panels serve not only as visual termination but also contribute to additional stabilization between plinths, which is particularly important for longer baying arrangements.
Functions and Equipment in Detail
The delivery includes 4 corner covers, 4 plinth corner pieces with a height of 200 mm, 1 front/rear plinth trim panel with 200 mm height, and 2 front/rear plinth trim panels with 100 mm height. Additionally, mounting hardware is included, enabling installation on plinth systems. The side plinth trim panels can be used for termination of a plinth unit or for additional stabilization between plinths. The combination of sheet steel and plastic ensures high mechanical strength and easy installation.
Technology Explained Simply
The use of sheet steel for the corner pieces and trim panels ensures high stability and durability, even under industrial loads. The plastic covers at the corners and baying positions provide a clean visual finish and protect against mechanical damage. The height of 200 mm is standardized and matches common plinth heights. The color RAL 9005 is an industrial standard that integrates well into operating environments. The type rating according to UL 50E (Type 1 and Type 12) indicates that the product is suitable for indoor use, with Type 1 for general indoor conditions and Type 12 for protected indoor areas with limited splashing water.
Compatibility and Accessories
The plinth corner piece is specifically designed for enclosures with a width of 800 mm and fits various housing types of the VX system. It can be combined with additional accessories such as mounting rails, levelling feet, C-profile rails, castors, plinth baying brackets, cable strain relief rails, and optional trim panel fastening solutions. These components extend the functionality of the plinth system and allow for flexible internal configuration as well as secure cable entry.
Installation and Mounting
Installation is carried out using the mounting hardware included in the delivery. The plinth corner pieces are fastened to the corners of the plinth systems, while the front and rear trim panels close off the open surfaces. The side trim panels can be used as needed for additional stabilization or as internal fittings. Installation is simple and does not require special tools, as the fastening components are standardized.
Operational Advantages
The high stability of the plinth ensures secure fixation of enclosures, which is particularly important for heavy or mobile installations. The flexible internal configuration options provided by VX accessories allow individual adaptation to specific requirements. The flush termination between baying positions improves the appearance and reduces the risk of interference fields or mechanical damage. The use of sheet steel and plastic ensures long service life and low maintenance requirements.