Rittal 8660022, EAN: 4028177978133

Rittal 8660022 Base Corner Piece VX 200x600

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 8660022 Base Corner Piece VX 200x600

Lieske Part No. 1103902
Mfg Part No 8660022
EAN-Code 4028177978133
Manufacturer Rittal
Here only 61,49 EUR
73,17 EUR incl. VAT

Further information for Rittal 8660022 Base Corner Piece VX 200x600

General
MaterialSocket corner piece: sheet steel, socket front/rear cover: sheet steel, corner and gang cover: plastic
ColourRAL 9005
Scope of delivery4 corner covers, including fastening material, 4 base corner pieces, 200 mm high, 1 base panel front/back, 200 mm, 2 base panels front/back, 100 mm
NoteSocket inserts, side-mounted, serve to terminate a socket unit or for additional stabilization between sockets or for internal fitting of sockets
Height200 mm
Suitable forHousing type: VX, VX IT, VX SE, TX CableNet, TS, TS IT, TP, PC, IW, CX, width: = 600 mm
Type rating according to UL 50EType 1, Type 12
Weight/PU7,27 kg
PCF/VE (Cradle-to-Gate)26.32 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 8660022 is a plinth corner piece with integrated plinth trim panels at the front and rear, specifically developed for enclosures and housings of the VX system with a width of 600 mm. It serves as a stable termination for plinth units and enables a clean, flush connection between adjacent enclosures. The component consists of sheet steel for the corner pieces and trim panels, and plastic for the corner and baying covers. The colour is RAL 9005, corresponding to a dark grey, ensuring a uniform visual appearance in industrial environments.

Applications
This plinth corner piece is used in industrial plants, during enclosure assembly, and in electrical installations where high stability and proper termination of plinths are required. It is compatible with various housing types, including VX, VX IT, VX SE, TX CableNet, TS, TS IT, TP, PC, IW, and CX, provided the width is 600 mm. Its use is particularly common in environments requiring secure and aesthetically pleasing plinth mounting, such as production halls, automation technology, or when installing IT infrastructures in enclosures.

Functions and Equipment in Detail
The product includes four plinth corner pieces with a height of 200 mm, one plinth trim panel at the front/rear of the same height, and two additional trim panels at 100 mm height. The trim panels serve not only as an aesthetic finish but also provide additional stabilisation between plinths or as a base for internal modifications. The delivery also includes four plastic corner covers and the necessary mounting hardware, enabling installation without additional tools or components. The plinth trim panels can also be mounted laterally to terminate a plinth unit or enhance stability between multiple plinths.

Technology Explained Simply
The construction from sheet steel ensures high mechanical strength and resistance to mechanical stress. The height of 200 mm corresponds to a standard dimension suitable for most VX plinth systems. The integrated trim panels allow flexible cable entry and support cable organisation in the lower section of the enclosure. The plastic covers provide a clean visual finish and protect the fastening elements from contamination. The RAL 9005 colour is an industry standard and integrates well into existing installations.

Compatibility and Accessories
The plinth corner piece is suitable for a wide range of housing types, including VX, VX IT, VX SE, TX CableNet, TS, TS IT, TP, PC, IW, and CX, provided the width is 600 mm. It can be combined with various accessories, such as levelling feet M12, cable strain relief rails, VX castors, VX levelling elements, plinth baying brackets, VX plinth expansion angles, C-profile rails, double swivel castors, mounting steps, VX system chassis, and VX cable strain relief rail with angle profile. These components extend the functionality of the plinth and allow individual adaptation to specific requirements.

Mounting and Installation
Installation is carried out by securing the plinth corner pieces to the corners of the plinth using the included mounting hardware. The trim panels are attached to the front and rear sides to ensure a closed and stable termination. The corner covers are mounted at the baying points to enable a flush transition between multiple enclosures. The installation requires no special tools and can be performed as part of standard mounting operations.

Operational Advantages
The use of the Rittal VX 8660022 provides high plinth stability, increasing the safety and longevity of the entire enclosure system. The flexible internal modification capability, enabled by the integrated trim panels, and compatibility with various accessories allow individual adaptation to different requirements. The flush termination at baying points ensures a professional appearance and facilitates maintenance and inspection of the installation. Compliance with UL 50E Type 1 and Type 12 standards ensures safe use in indoor environments and in areas with limited protection requirements against dust and splashing water.

Type Rating according to UL 50E
The product meets the requirements of UL 50E Type 1 and Type 12, meaning it is suitable for indoor use and provides a certain level of protection against dust and splashing water. This certification is important for meeting safety standards in industrial installations.

Material and Colour
The plinth corner pieces and front/rear trim panels are made of sheet steel, ensuring high mechanical strength and durability. The corner and baying covers are made of plastic to enable a clean visual finish. The RAL 9005 colour is a dark grey, which blends well into industrial environments and allows for a uniform visual design.

Scope of Delivery
The delivery includes 4 corner covers, mounting hardware, 4 plinth corner pieces (200 mm high), 1 plinth trim panel front/rear (200 mm), and 2 plinth trim panels front/rear (100 mm). These components are sufficient to terminate and stabilise a plinth unit with a width of 600 mm.

Weight and Environmental Impact
The product has a gross weight of 7.27 kg per packaging unit (2 pieces). The environmental impact is described by the PCF value (Cradle-to-Gate) of 26.32 kg CO2 eq (Category B), which is approximately calculated and self-declared based on the product weight. This value serves as a reference for the environmental compatibility of the product during the production process.

Accessories and Alternatives
Various accessories are suitable for this item, including levelling feet M12, cable strain relief rails, VX castors, VX levelling elements, plinth baying brackets, VX plinth expansion angles, C-profile rails, double swivel castors, mounting step, VX system chassis, and VX cable strain relief rail with angle profile. These components can be used additionally, depending on requirements, to enhance the functionality and stability of the plinth.

Compatible Housing Types
The plinth corner piece is suitable for housing types VX, VX IT, VX SE, TX CableNet, TS, TS IT, TP, PC, IW, and CX, provided the width is 600 mm. Compatibility with these housing types enables flexible use in various industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1103902
qrcode für Rittal 8660022 Base Corner Piece VX 200x600