| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Number of breaks | 5 |
| Suitable for | Housing type: VX: = 1,000 mm, housing type: VX SE |
| Degree of protection IP according to IEC 60 529 | IP 55 in combination with cable gland or connector gland |
The Rittal VX 8619.802 is a
cable entry plate made of
sheet steel with a
zinc-coated surface, specifically designed for enclosures of type VX with a width of 1,000 mm as well as for the VX SE variant. It serves as a replacement for the standard split base plates and enables organized and protection-compliant cable and connector entry into the enclosure. The plate features five pre-cut openings intended for the installation of cable entry glands or connector passage glands. The protection rating
IP 55 is achieved when the plate is used in combination with suitable cable entry glands or connector passage glands, making it suitable for use in industrial environments with increased risk of contamination and splashing water.
Applications
The cable entry plate is used in industrial electrical engineering where structured and protection-compliant cable entry into enclosures is required. It is particularly suitable for installations operated in production environments, manufacturing technology, or automation technology, where high mechanical load capacity and protection against dust and splashing water are necessary. The use in combination with cable entry glands enables a secure and durable cable installation without compromising the protection rating of the enclosure.
Functions and Equipment in Detail
The plate is made of
sheet steel protected against corrosion by a
zinc-coated surface. The
number of openings is five, allowing multiple cables or connectors to be introduced simultaneously. The openings are dimensioned to be compatible with standardized cable entry glands or connector passage glands. The delivery includes
fastening material required for mounting the plate in the enclosure. Installation replaces the standard split base plates, enabling flexible and application-specific cable entry.
Technology Explained Simply
The protection rating
IP 55 means the device is protected against dust (dust-tight) and against splashing water from any direction. This protection rating is only achieved when the cable entry plate is combined with appropriate cable entry glands or connector passage glands. The glands seal the openings and prevent dirt or water from entering the enclosure. The zinc-coated surface of the sheet steel provides additional corrosion protection, extending the service life of the component in humid or aggressive environments.
Compatibility and Accessories
The cable entry plate is designed for enclosures of type
VX with a width of 1,000 mm as well as for the
VX SE variant. It is compatible with various cable entry glands, including glands with diameters of 13 mm, 21 mm, and up to 47 mm, as well as connector passage glands. These accessories allow adaptation to different cable diameters and connectors. Combining the plate with suitable glands is necessary to ensure the required IP 55 protection rating.
Installation and Mounting
Installation replaces the standard split base plates in the enclosure. The plate is fastened using the included fastening material, with the pre-cut openings designated for installing cable entry glands or connector passage glands. The mounting is designed to be carried out without additional modification to the enclosure.
Operational Advantages
The cable entry plate provides a structured and protection-compliant solution for cable entry into enclosures. The use of pre-cut openings and compatible glands enables quick and secure installation. The zinc-coated surface increases resistance to corrosion, extending the service life of the component. The IP 55 protection rating, when combined with suitable glands, ensures reliable protection in industrial applications, thereby guaranteeing the operational safety of the entire system.