| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Number of breaks | 8 |
| Suitable for | Housing type: VX: = 800 mm, housing type: VX SE |
| Degree of protection IP according to IEC 60 529 | IP 55 in combination with cable gland or connector gland |
The Rittal VX 8619.801 is a
cable entry plate made of
sheet steel with a
zinc-coated surface, specifically designed for enclosures of type VX with a width of 800 mm as well as for VX SE enclosures. It serves as a replacement for the standard split base plates and enables organized and protection-compliant cable and connector entry into the enclosure. The plate features eight pre-formed cutouts intended for mounting cable entry glands or connector passage glands. The use of these glands is necessary to achieve the required
protection rating IP 55 in accordance with IEC 60 529, which ensures dust and splash water protection and thus makes it suitable for outdoor use.
Applications
The cable entry plate is used in industrial plants, automation technology, and during the installation of enclosures where secure and structured cable entry is required. It is particularly suitable for applications where multiple cables or connectors must be routed through the enclosure base plate without compromising the mechanical stability or protection rating of the enclosure. Using it in combination with appropriate glands ensures a tight and contamination-free connection between the enclosure and the connected lines.
Functions and Equipment in Detail
The plate is made of
sheet steel and features a
zinc-coated surface that provides corrosion protection and extends the component’s service life. It is equipped with
eight cutouts designed for mounting cable entry glands or connector passage glands. The delivery includes
fastening material required for mounting the plate in the enclosure. The use of cable entry glands or connector passage glands is mandatory to ensure the IP 55 protection rating, as the plate alone does not provide full protection.
Technology Explained Simply
The
protection rating IP 55 means the device is protected against dust and splashing water. This is particularly important in environments where moisture, dust, or splashing water may occur, such as in production halls or outdoor areas. However, the IP protection rating is only achieved when the cable entry plate is combined with suitable glands. The glands ensure that the openings in the plate are tightly sealed, preventing foreign objects or moisture from entering. The zinc-coated sheet steel offers high mechanical strength and is resistant to corrosion, ensuring long-term stability of the component in industrial environments.
Compatibility and Accessories
The cable entry plate is specifically designed for enclosures of type VX with a width of 800 mm as well as for VX SE enclosures. It is compatible with various cable entry glands, including glands with diameters of 13 mm and 21 mm, as well as connector passage glands. Combination with glands for cables with a maximum diameter of 47 mm is also possible, provided the appropriate glands are selected.
Installation and Mounting
Installation is carried out in place of the standard split base plates in the enclosure. The plate is fastened using the included fastening material. The eight cutouts allow flexible placement of cable entry glands or connector passage glands. The exact positioning of the glands depends on the requirements for cable or connector routing. Installation does not require special tools, although correct selection and mounting of the glands are crucial for achieving the required protection rating.
Operational Advantages
The cable entry plate provides structured and secure cable entry, ensuring the integrity of the enclosure. The use of glands creates a tight connection that protects against contamination and moisture. The zinc-coated surface increases corrosion resistance, extending the component’s service life. Compatibility with various glands allows flexible adaptation to different cable management requirements. Installation is simple and does not require additional tools, enabling efficient and quick setup.