| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Number of breaks | 6 |
| Suitable for | Housing type: VX: = 600 mm, housing type: VX SE |
| Degree of protection IP according to IEC 60 529 | IP 55 in combination with cable gland or connector gland |
The Rittal VX 8619.800 is a
cable entry plate made of
sheet steel with a
zinc-coated surface, specifically designed for enclosures of type VX with a width of 600 mm as well as for the VX SE variant. It serves as a replacement for the standard split base plates and enables organized and protection-compliant cable and connector entry into the enclosure base. The plate features
six cutouts intended for the installation of cable entry glands or connector passage glands. The use of these glands is necessary to achieve the
protection rating IP 55 in accordance with IEC 60 529, which ensures dust and splash water protection, thereby enabling use in industrial environments, even under slightly soiled or damp conditions.
Applications
The cable entry plate is used in industrial electrical engineering where structured and secure cable routing within the enclosure is required. It is particularly suitable for installations operated in production environments, manufacturing technology, or automation technology. The use of cable entry glands ensures that the protection rating IP 55 is maintained, which is crucial for protection against dust and splash water. The width of 600 mm matches the standard dimensions of VX control panels, ensuring easy integration into existing systems.
Functions and Equipment in Detail
The plate is made of robust
sheet steel and is
zinc-coated to prevent corrosion and ensure a longer service life. The
six cutouts are precisely arranged to allow even distribution of cable and connector entries. Installation takes place in place of the standard split base plates, creating a continuous, flat surface that simplifies cable routing.
Technology Explained Simply
The
protection rating IP 55 is only achieved in combination with suitable cable entry glands or connector passage glands. These glands seal the openings in the plate and prevent dust or splash water from entering the enclosure. The IP classification IP 55 means that the device is protected against dust (dust-tight) and against splash water from any direction. This is particularly important in environments where the control system is not fully enclosed, for example in production halls or outdoor installations. The zinc-coated sheet steel offers high mechanical strength and is resistant to mechanical stress and corrosion.
Compatibility and Accessories
The cable entry plate is specifically designed for enclosures of type VX with a width of 600 mm as well as for the VX SE variant. It is compatible with various cable entry glands, including glands with diameters of 13 mm and 21 mm, as well as connector passage glands. The glands serve as sealing elements and ensure the necessary sealing of the openings in the plate. The use of glands with a maximum diameter of 47 mm is also possible, with the exact selection depending on the cable or connector geometry.
Installation and Mounting
Installation takes place in place of the standard split base plates. The cable entry plate is fastened to the bottom of the enclosure using the mounting materials included in the delivery. The six cutouts allow for flexible arrangement of cable and connector entries. Installation does not require special tools, as the mounting materials are standard for enclosure installations. The use of cable entry glands is essential to ensure the protection rating IP 55.
Operational Advantages
The cable entry plate provides structured and secure cable routing within the enclosure. The use of glands ensures permanent sealing, maintaining the protection rating IP 55. The zinc-coated surface protects the plate against corrosion, increasing its service life. The integrated cutouts allow for flexible and efficient arrangement of cable and connector entries, simplifying maintenance and inspection of the control system. Compatibility with VX control panels ensures easy integration into existing systems.