| General |
| Material | steel sheet |
| Surface protection | Dip-coated, powder-coated exterior |
| Colour | RAL 7035 |
| Scope of delivery | 2 doors including door frame, 130° hinges, locking parts |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| Suitable for | Cabinet type: VX, width: = 800 mm, height: = 2,000 mm |
The Rittal VX 8618.120 is a
lock and auxiliary door for enclosures of type VX, specifically designed for a mounting width of 800 mm and a height of 2,000 mm. The product serves as a replacement for a single 800 mm wide door or as a rear panel, enabling for example compliance with escape route requirements by using two 400 mm wide doors instead of a single wide door. The door is made of
sheet steel and features a
dip primer as well as an
externally powder-coated surface in the colour
RAL 7035, ensuring high corrosion resistance and a uniform, robust surface quality.
Applications
The lock and auxiliary door is primarily intended for use in industrial enclosures of the VX system. It is used where improved accessibility or compliance with safety regulations, such as escape route widths, is required. The door can also be mounted as a replacement for an 800 mm wide rear panel, increasing flexibility in enclosure configuration. Typical use cases include production environments, installation of control systems, or plants with high accessibility requirements.
Functions and Equipment in Detail
The product includes
two doors, each equipped with a
door tube frame. The doors are fitted with
130° hinges, allowing for wide opening and facilitating access to internal components of the enclosure. The
locking components are already integrated, enabling the doors to be directly locked and secured. The
protection rating IP 55 according to IEC 60 529 ensures protection against dust and splashing water, making the door suitable for use in industrial environments with increased contamination or moisture exposure.
Technology Explained Simply
The use of
sheet steel as material ensures high mechanical stability and durability. The
dip primer forms an even base layer that prevents corrosion, while the
externally powder-coated surface provides an additional protective layer resistant to mechanical stress and environmental influences. The colour
RAL 7035 is a grey, neutral tone that blends well in industrial environments. The
IP 55 protection rating means the door is dust-tight and protected against splashing water, making it suitable for indoor use as well as in environments with increased humidity.
Compatibility and Accessories
The door is specifically designed for enclosures of the
housing type VX with a width of at least 800 mm and a height of at least 2,000 mm. Installation is carried out in place of an 800 mm wide door or rear panel.
Installation and Mounting
Mounting is done at the designated attachment points of the VX enclosure. The doors are equipped with integrated hinges and locking components, so no additional mounting parts are required. Installation is performed by securing the door tube frames to the enclosure sides, with the hinges enabling door opening. The locking components ensure secure latching.
Operational Advantages
The use of the lock and auxiliary door enables flexible configuration of enclosures, particularly regarding compliance with safety regulations. The
IP 55 protection rating ensures high reliability in demanding environments. The robust construction from
sheet steel and the
powder-coated surface guarantee long service life and low maintenance. The integrated
130° hinges and
locking components reduce installation time and increase operational safety.