| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Mounting options | In VX on the inner mounting plane on VX cabinet profile, In VX SE on cabinet profile in combination with VX adapter rail, As built-in kit for equipment floor |
| Note | Cabinets with mounting plate include 2 mounting rails in the delivery scope. |
| Suitable for | Cabinet type: VX, VX SE, width/depth: 600 mm |
| PCF/VE (Cradle-to-Gate) | 25,46 |
The Rittal VX mounting rail 8617.720 is a system accessory for the internal fitting of enclosures of type VX and VX SE. It is designed for variable and individual mounting of devices and components on the internal mounting plane of the enclosure frame. The rail is made of sheet steel and features a galvanized surface, ensuring high corrosion resistance. With dimensions of 18 x 39 mm and a depth of 600 mm, it is specifically designed for enclosures with a width/depth of 600 mm. The packaging unit includes 4 pieces, with mounting hardware included in the delivery scope.
Applications
The mounting rail is intended for use in VX enclosure frames, particularly on the internal mounting plane at the VX frame profile. For VX SE enclosure types, it can be mounted on the frame profile in combination with a VX adapter rail. Additionally, it can be used as a mounting kit for component shelves. In enclosures equipped with a mounting plate, two mounting rails are already included in the delivery scope. The rail is suitable for use in industrial electrical and IT installations where flexible and modular device mounting is required.
Functions and Equipment in Detail
The rail is rear-prepared to accommodate cable ties, enabling optimal cable routing within the enclosure. Mounting is simple into the system perforation of the enclosure frame, even when a mounting plate is installed in the rearmost position. Use in combination with other chassis is possible, increasing flexibility in device arrangement. The galvanized surface ensures long-term use under industrial conditions.
Technology Explained Simply
The mounting rail is made of sheet steel, protected against corrosion by galvanization. The dimensions 18 x 39 mm correspond to a standard format for mounting rails in enclosures, ensuring high compatibility with common devices and mounting elements. The depth of 600 mm matches the standard dimensions of VX enclosure types. The system perforation enables precise and quick mounting without additional drilling.
Compatibility and Accessories
The rail is specifically designed for enclosure types VX and VX SE, which have a width/depth of 600 mm. As an accessory, the use of cable ties with a length of 150 mm is recommended to optimize cable routing within the enclosure. The mounting rail can also be used in combination with other chassis, enabling adaptation to different requirements.
Mounting and Installation
Mounting is done by inserting into the system perforation of the enclosure frame. In enclosures with a mounting plate, the rail can also be mounted in the rearmost position. The included mounting hardware facilitates installation. The rail is designed for use in industrial environments, with the galvanized surface providing high resistance to environmental influences.
Advantages in Operation
The mounting rail enables flexible and modular device arrangement within the enclosure. The integrated cable routing via the provided cable ties reduces the risk of cable entanglement and improves clarity. Simple mounting into the system perforation reduces installation time. The use of sheet steel with a galvanized surface ensures long service life and high reliability under industrial conditions.