Rittal 8609200, EAN: 4028177817746

Rittal 8609200 VX Partition 1800x400mm

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 8609200 VX Partition 1800x400mm

Lieske Part No. 1440945
Mfg Part No 8609200
EAN-Code 4028177817746
Manufacturer Rittal
Here only 64,51 EUR
76,77 EUR incl. VAT

Further information for Rittal 8609200 VX Partition 1800x400mm

General
MaterialSheet steel, 1.5 mm
Surface protectionZinc-plated
Scope of deliveryIncluding mounting hardware
Suitable forHousing type: VX, height: = 1,800 mm, depth: = 400 mm
Mounting optionsInstallation is on the outer mounting plane; the inner plane remains free for further expansion
Mounting noteFor mounting in combination with a partition, the mounting bracket inside 8617500 or the mounting connector outside 8617502 is required
Degree of protection IP according to IEC 60 529IP 54
The Rittal VX 8609.200 partition panel is a system accessory for enclosures of type VX, specifically designed for enclosures with a height of 1,800 mm and a depth of 400 mm. It serves to compartmentalize individual enclosure cells, enabling an organized and functional division of the interior space. The partition panel is mounted on the outer mounting plane, leaving the inner plane free for additional installations. The construction from sheet steel with a thickness of 1.5 mm provides sufficient stability, while the surrounding double hemming increases mechanical strength and allows for the installation of a seal. The surface is galvanized, providing a corrosion-resistant protective layer and extending service life in industrial applications.

Applications
The partition panel is suitable for the structured division of enclosures, particularly in systems where different electrical or electronic components must be spatially separated. Due to the symmetrical design of the frame system, the partition panel can also be mounted on the rear side of the enclosure. This enables, for example, the installation of frequency converters whose heat sinks are oriented outward to ensure efficient heat dissipation. A cover hood can then be used for aesthetic blending and additional protection.

Functions and Equipment in Detail
The partition panel features a double, surrounding hemming that supports both mechanical stability and the installation of seals. Mounting is done on the outer mounting plane, leaving the inner plane free for further installations. The partition panel is designed for use in enclosures of type VX with a height of 1,800 mm and a depth of 400 mm.

Technology Explained Simply
The use of sheet steel with a thickness of 1.5 mm ensures sufficient strength to withstand mechanical loads in industrial applications. The galvanized surface protects the material from corrosion, especially in environments with high humidity or aggressive atmospheres. The protection class IP 54 according to IEC 60 529 means that the partition panel is dust-tight and protected against splashing water from all directions, making it suitable for use in indoor environments as well as in slightly exposed outdoor areas. The double hemming ensures a stable structure and allows for the installation of seals to provide better compartmentalization of enclosure cells.

Compatibility and Accessories
The partition panel is specifically designed for enclosures of type VX with dimensions of height 1,800 mm and depth 400 mm. For baying in combination with another partition panel, additional components are required: either the inner baying bracket 8617500 or the outer baying connector 8617502. These elements enable a secure and stable connection of multiple enclosures or partition panels. Compatible accessories available in the range include the VX outer baying connectors (sheet steel, 1200 mm) and the inner VX baying bracket (6 pieces). These components are designed for expanding and baying enclosure systems.

Mounting and Installation
The partition panel is mounted on the outer mounting plane of the enclosure. The inner plane remains free to allow additional installations such as cable ducts, mounting plates, or other assemblies. The included mounting hardware facilitates installation. When baying multiple enclosures or partition panels, the use of the inner baying bracket 8617500 or the outer baying connector 8617502 is required to ensure a stable connection.

Operational Advantages
The partition panel enables clear spatial separation within the enclosure, simplifying maintenance, inspection, and installation of components. The possibility to mount the partition panel on the rear side provides additional flexibility in arranging assemblies, especially for heat dissipation systems. The IP protection class 54 ensures a high level of protection against dust and splashing water, increasing reliability in operation. The galvanized surface ensures long service life even in demanding environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440945
qrcode für Rittal 8609200 VX Partition 1800x400mm