| General |
| Material | Cabinet frame: steel sheet, 1.5 mm, roof: steel sheet, 1.5 mm, door: steel sheet, 2.0 mm, rear panel: steel sheet, 1.5 mm, base plates: steel sheet, 1.5 mm, mounting plate: steel sheet, 3.0 mm |
| Surface protection | Cabinet frame: dip-primed, door, roof and rear panel: dip-primed, externally powder-coated, textured lacquer, mounting plate and base sheets: galvanised |
| Colour | RAL 7035 |
| Scope of delivery | cabinet frame, door(s), door hinge right, reversible to left, roof sheet, rear panel, floor sheets, mounting plate, 2 mounting rails 18 x 39 mm, lock: 3 mm double bar |
| Width | 600 mm |
| Height | 2.000 mm |
| Depth | 800 mm |
| Mounting plate dimensions (W x H) | 499 mm x 1.896 mm |
| Degree of protection IP according to EN 60 529 | IP 55 |
| NEMA degree of protection | NEMA 1, NEMA 12 |
| Type rating according to UL 50E | Type 1, Type 12 |
| IK code | IK10 |
| Number of doors | 1 |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 295.42 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 8608.000 is a bayed enclosure system made of sheet steel, designed for use in industrial and technical applications. It features dimensions of width 600 mm, height 2,000 mm, and depth 800 mm, and is configured as a single-door model on the front side. The enclosure system serves as a base housing for the construction of enclosures and provides a structured mounting surface for electrical and electronic components. The construction is suitable for use in production environments, machine building, or automation technology, where a robust and flexible enclosure solution is required.
Applications
This enclosure system is designed for use in indoor environments as well as in areas with increased contamination risk. The protection rating IP 55 according to EN 60 529 ensures protection against dust and splashing water, making it suitable for areas with low to moderate humidity and contamination. The standards NEMA 1 and NEMA 12, as well as the type ratings Type 1 and Type 12 according to UL 50E, confirm suitability for dry indoor spaces and environments with light contamination. The IK code IK10 indicates high mechanical strength against mechanical impacts such as shocks or vibrations. The enclosure construction is bayable on all sides, enabling flexible arrangement in rows or modular systems.
Functions and Equipment in Detail
The enclosure system consists of a sheet steel frame with a wall thickness of 1.5 mm, featuring a dip-primed surface. The door, also made of sheet steel (2.0 mm), is fitted with a PU foam seal and provides a door opening of 130°, which can be extended tool-free to 180°. The door is standard right-hinged but can be converted to left-hinged. The locking mechanism uses a 3 mm double bar according to DIN 43668, enabling a four-point locking bar system. The rear panel, roof plate, and base plates are also made of 1.5 mm sheet steel, are removable, and feature PU foam seals. The base plates are divided into three sections, removable, and replaceable.
Technology Explained Simply
The mounting plate, made of 3.0 mm sheet steel, is C-flanged on the sides and adjustable in depth in 25 mm increments via integrated plastic glides and reusable mounting rails. The plate features a mounting grid to simplify component positioning. The entire construction offers a clearance of 17 mm from the floor. The frame profiles are symmetrically constructed with integrated blind rivet nuts M6 for securing fittings. Edges are rounded, and horizontal profiles feature a groove above the seal to ensure better sealing. The entire construction is load-bearing up to 15,000 N.
Compatibility and Accessories
The enclosure system is expandable with various accessories. These include mounting brackets, levelling feet, transport eyes, dust protection strips, mounting plate spacers, TFT/monitor holders, comfort handles, C-profile rails, covers for baying, cable entry ferrules in various diameters, circuit diagram pockets, multitools, system chassis, and multi-locking systems. These components allow individual adaptation of the enclosure to specific requirements such as cable management, height adjustment, or additional safety functions.
Mounting and Installation
Mounting is performed via the integrated mounting levels on the frame, accessible from inside and outside. The mounting plate is depth-adjustable and provides a stable base for installing components. The base plates are secured to the base frame, which allows anchoring to the floor. The rear panel and roof plate are removable and secured with screws, enabling easy maintenance and repair. Electrical conductivity between frame, rear panel, roof, and base plates ensures automatic equipotential bonding according to DIN 62 208.
Operational Advantages
The enclosure system offers high mechanical stability, reliable protection rating, and flexible mounting design. The integrated mounting levels and 25 mm grid simplify installation and maintenance. Removable components such as door, rear panel, and base plates allow easy inspection and repair. The use of sheet steel with various surface treatments (dip-primed, powder-coated, galvanized) ensures high corrosion resistance. The uniform colour in RAL 7035 supports visual harmonization in industrial environments. Integrated QR codes on the roof, door, mounting plate, rear panel, and nameplate enable unique identification and labeling of the enclosure.
Scope of Delivery
The scope of delivery includes the enclosure frame, one door, the roof plate, the rear panel, the base plates, the mounting plate, two mounting rails (18 x 39 mm), and the 3 mm double bar locking mechanism. The door is standard right-hinged but can be converted to left-hinged. The mounting plate is depth-adjustable and features a mounting grid. The base plates are divided into three sections and removable. The entire construction is designed for use in industrial applications and provides a robust and flexible foundation for enclosure construction.