| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | 2 mounting chassis, 4 mounting brackets, including fastening material |
| Mounting options | In VX on the inner mounting plane on VX cabinet profile, In VX SE on vertical cabinet profile in combination with VX adapter rail, Between two chassis vertically on inner mounting plane, As built-in kit for equipment floor |
| Suitable for | Housing type: VX, VX SE, Width/depth: 800 mm |
| PCF/VE (Cradle-to-Gate) | 9,06 |
The Rittal VX 8100.743 is a mounting chassis made of sheet steel with a galvanized surface, specifically designed for use in the internal fitting of enclosures of type VX and VX SE. It is intended for the flexible and individual mounting of electronic components, devices, or modules on the inner mounting plane of the enclosure frame. The chassis is designed with a width/depth of 800 mm and allows for flush mounting to the enclosure frame. Thanks to the integrated system perforation on all four sides and perforation at the top and bottom for cage nuts, it is prepared for securing custom components using metric screws. The construction also allows for individual shortening to adapt to specific requirements.
Applications
The mounting chassis is intended for use in enclosures of type VX and VX SE, particularly with a width/depth of 800 mm. It can be mounted directly onto the VX enclosure profile, and in VX SE enclosures, it is used in conjunction with the VX adapter rail on the vertical enclosure profile. Additionally, multiple chassis can be installed one above the other, and mounting can also be performed between already installed chassis. As a mounting kit for the component shelf, it is also usable, increasing flexibility within the enclosure interior.
Functions and Equipment in Detail
The chassis features system perforation on all four sides, enabling versatile mounting options for various components. The top and bottom edges are equipped with perforations for cage nuts, allowing components to be securely fastened using metric screws. The mounting is flush with the enclosure frame, ensuring an orderly and aesthetically pleasing setup inside the enclosure. The additional mounting brackets included in the delivery allow installation even if a mounting plate is already present in the enclosure.
Technology Explained Simply
The chassis is made of sheet steel that is galvanized to prevent corrosion and ensure a longer service life. The galvanized surface provides good protection against environmental influences, especially in industrial environments. The perforation on all sides and the cage nut perforations at the top and bottom offer a universal mounting option for various electronic assemblies. The design allows for later adjustments, such as shortening, to be cut precisely to the required length.
Compatibility and Accessories
The mounting chassis is specifically designed for enclosures of types VX and VX SE with a width/depth of 800 mm. It is compatible with the VX enclosure profile and can be used in conjunction with the VX adapter rail in VX SE enclosures. As an accessory, a cable tie with a length of 150 mm is offered, suitable for securing cables or wiring inside the enclosure.
Mounting and Installation
The mounting is performed on the inner mounting plane of the enclosure frame. The chassis is fastened to the enclosure profile using the included mounting brackets and fastening materials. Installation is also possible if a mounting plate is already present in the enclosure, as the additional brackets enable this. Mounting can be done both horizontally and vertically, depending on the arrangement within the enclosure. The use of multiple chassis stacked vertically is possible, enabling a modular and flexible arrangement of devices within the enclosure interior.
Advantages in Operation
The mounting chassis offers high flexibility in arranging components within the enclosure interior. The system perforation on all sides and the cage nut perforations allow for quick and secure mounting of various components. The ability to individually shorten the chassis increases adaptability to specific requirements. The galvanized surface ensures high corrosion resistance, extending the service life in industrial applications. The delivery includes two mounting chassis, four mounting brackets, and the necessary fastening materials, enabling direct installation without additional purchases.