| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Note | To completely close a floor opening, at least one sliding plate is required. For double-door cabinets, one unit is sufficient for one cabinet half. |
| Note on part number | Only for one cabinet half |
| Width | 540 mm |
| Depth | 237,5 mm |
| Suitable for | Cabinet type: VX, VX IT, VX SE, stand console CX, console base CX, width: = 1,200 mm |
The Rittal VX 8001221 is a floor plate made of steel sheet with a galvanized surface, specifically designed for the individual expansion of the floor area in enclosures of the VX, VX IT, VX SE, stand console CX, and console base CX series. It is designed for enclosures with a width of 1,200 mm and serves as a base for the installation of cable entries, glands, or other components in the lower area of the enclosure. The dimensions are 540 mm in width and 237.5 mm in depth, with the specification “1200x237.5 mm” referring to the overall width of the enclosure for which the plate is designed as a single unit for one half of the enclosure.
Floor plate for use in industrial environments enables structured and secure cabling in the lower area of the enclosure. It is used to cover openings in the floor area, with at least one sliding plate required for complete sealing. For double-door enclosures, one packaging unit is sufficient to supply one half of the enclosure. The plate is equipped with mounting elements to ensure a secure fit within the enclosure.
Equipotential bonding and
earthing points are integrated to ensure a safe electrical connection and dissipation of currents. This is particularly important in environments with increased risk of electrical disturbances or when using conductive materials inside the enclosure. The galvanized surface provides good corrosion protection, extending the service life of the plate in industrial applications.
Compatibility is provided for enclosure types VX, VX IT, VX SE, stand console CX, and console base CX, provided the enclosure width is 1,200 mm. The floor plate is not intended for other widths or enclosure types. Use is exclusively in the enclosure floor opening area, with installation carried out using the included mounting hardware.
Scope of delivery includes the floor plate and the required mounting materials. It is designed for use in an enclosure, with the specification “only for one half of the enclosure” meaning that two units are required for a double-door enclosure to supply both halves. Installation is done by screwing into the designated mounting points in the enclosure floor.
Technical features such as dimensions (540 mm width, 237.5 mm depth) and material (steel sheet, galvanized) are tailored to industrial requirements. The weight is 1.64 kg (net weight), enabling easy handling during installation. The use of steel sheet ensures high mechanical stability, while galvanization protects the surface from corrosion. The integrated earthing points and the possibility of equipotential bonding via the mounting elements are essential for electrical safety in the enclosure.
Combination with additional enclosure accessories such as cable entries or glands is possible, but not included in this item.
Mounting and installation are carried out using the included mounting hardware at the designated points in the enclosure floor. Positioning follows the enclosure geometry, with the specification “only for one half of the enclosure” to be considered. Installation is part of the individual enclosure expansion and requires no additional tools other than a screwdriver or suitable wrench.
Operational advantages include structured cabling, secure earthing, and equipotential bonding, which enhance operational safety. The galvanized surface ensures longer service life, especially in environments with high humidity or aggressive atmospheres. The modular design allows flexible adaptation to different enclosure configurations within the specified series.
The
approvals include UL and C-UL (listed), enabling use in specific markets, particularly in the USA and Canada. These approvals relate to electrical safety and compliance with respective standards.
The product is available in a packaging unit of 1 piece and serves as a replacement part or addition for individual configuration of enclosures. The specification “only for one half of the enclosure” is crucial for planning the required quantity for double-door enclosures.