| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Note | To completely close a floor opening, at least one sliding plate is required. For double-door cabinets, one unit is sufficient for one cabinet half. |
| Width | 440 mm |
| Depth | 237,5 mm |
| Suitable for | Housing type: VX, VX IT, VX SE, console CX, console base CX, width: = 1,000 mm |
The Rittal VX 8001220 is a base plate made of steel sheet with a galvanised surface, specifically designed for the individual expansion of the base area in enclosures of type VX, VX IT, VX SE, stand console CX and console base CX with a width of 1000 mm. It serves as a fixed cover for the lower part of the enclosure and enables structured and secure cabling in the base area. The plate has a width of 440 mm and a depth of 237.5 mm, where the specification “width x depth: 1000x237.5 mm” refers to the compatible enclosure width, not the physical dimensions of the plate itself. The physical width of the plate is 440 mm, designed for installation in enclosures with a total width of 1000 mm.
Base plate is used here as a component for sealing and structuring the lower enclosure area. It is made of
steel sheet, protected against corrosion by a
galvanised surface. The galvanisation ensures a longer service life, especially in environments with increased humidity or low chemical stress. The product is designed for use in industrial enclosures, where a robust and low-maintenance construction is required.
Functions and equipment in detail
The base plate is equipped with fastening elements that ensure a secure and tight fit in the enclosure. Installation is carried out using the included fastening material, which is part of the delivery scope. A key technical feature is
equipotential bonding, achieved through the fastening elements and integrated
earthing points. This ensures a safe electrical connection to the enclosure housing and contributes to electromagnetic compatibility (EMC) as well as safety. The earthing points allow a direct connection to the protective conductor, which is particularly important for installations with high electrical loads or in potentially explosive areas.
Technology explained simply
The plate is installed in the lower part of the enclosure, where it seals the open base opening and simultaneously serves as a base for cabling. The dimensions are designed to fit enclosures with a total width of 1000 mm. The depth of 237.5 mm corresponds to the standard depth for the lower half of these enclosure types. The physical width of the plate is 440 mm, meaning it does not cover the entire width of the enclosure, but is designed for modular arrangement. For double-door enclosures, one packaging unit is sufficient to seal one half of the enclosure.
Compatibility and accessories
The base plate is compatible with enclosure types VX, VX IT, VX SE, stand console CX and console base CX, provided the enclosure width is 1000 mm. It is not intended for other widths or enclosure types. The product is delivered with fastening material sufficient for installation in the enclosure.
Installation and mounting
Mounting is done by securing the plate to the lower enclosure opening using the included material. The fastening elements are designed to ensure a secure connection to the enclosure body. The earthing points must be connected to the protective conductor of the enclosure to ensure equipotential bonding. Installation is typically done without tools, although a screwdriver or similar tool is required for mounting the fastening elements.
Advantages in operation
The base plate provides a stable and secure cover for the lower enclosure area, protecting against mechanical damage and ingress of foreign objects. The integrated earthing points ensure a reliable electrical connection, increasing safety. The galvanised surface extends the service life of the component and reduces maintenance. The modular design allows flexible adaptation to different enclosure configurations, especially for double-door enclosures, where one packaging unit is sufficient to seal one half. Use in combination with sliding plates enables complete sealing and structured cable routing in the base area.