Rittal 8001211, EAN: 4028177948662

Rittal 8001211 VX base plate 800 mm

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 8001211 VX base plate 800 mm

Lieske Part No. 1909182
Mfg Part No 8001211
EAN-Code 4028177948662
Manufacturer Rittal
Here only 8,74 EUR
10,40 EUR incl. VAT

Further information for Rittal 8001211 VX base plate 800 mm

General
Materialsteel sheet
Surface protectionZinc-plated
Scope of deliveryIncluding mounting hardware
NoteTo completely close a floor opening, at least one sliding plate is required. For double-door cabinets, one unit is sufficient for one cabinet half.
Width690 mm
Depth75 mm
Suitable forCabinet type: VX, VX IT, VX SE, CX console, CX console base, width: = 800 mm
The Rittal VX base plate, type 8001211, is a system accessory for the individual expansion of the base area in enclosures and housings. It is used for compartmentalizing and structured utilization of the lower section of enclosures from the VX, VX IT, VX SE, stand console CX, and console base CX series, which have a width of 800 mm. The plate is made of steel sheet and features a zinc-coated surface, providing a corrosion-resistant protective layer. Dimensions are 690 mm in width and 75 mm in depth, with the specification “800x75 mm” indicating the compatible enclosure width. The product is delivered in a packaging unit of one piece and includes fastening material. Installation is carried out using the included fastening elements, which simultaneously enable equipotential bonding. Additionally, earthing points are integrated to ensure a secure electrical connection.

Applications

The base plate is primarily used in industrial environments where organized and safe utilization of the base area in enclosures is required. It serves to shield cables, prevent dust and moisture ingress, and improve cable management structure. Particularly suitable for installations with high requirements for electrical safety and protection against electromagnetic interference. In double-door enclosures, one packaging unit is sufficient to seal one half of the enclosure. However, for complete sealing of the base opening, at least one sliding plate is required.

Functions and Equipment in Detail

The plate is designed to utilize the base area in enclosures without compromising electrical safety. The integrated earthing points allow direct connection to the enclosure’s protective conductor, which is important for diverting fault currents. The fastening elements ensure secure mounting and simultaneously enable equipotential bonding between the plate and the enclosure housing. The zinc-coated surface provides protection against corrosion, especially in environments with high humidity or aggressive atmospheres.

Technology Explained Simply

The base plate is not an electrically active component, but a mechanical accessory that seals the lower section of the enclosure. The zinc coating protects the steel sheet from oxidation, thereby extending the component’s service life. The fastening elements are designed not only to fix the plate but also to establish an electrical connection to the enclosure body. This is essential to ensure that the plate does not become a hazardous potential in the event of a short circuit or malfunction. The earthing points serve as connection points for protective conductor cables routed into the enclosure.

Compatibility and Accessories

The base plate is specifically designed for enclosures of types VX, VX IT, VX SE, stand console CX, and console base CX, which have a width of 800 mm. It is not suitable for other widths or housing types. Compatibility is limited to the specified housing types. In double-door enclosures, one packaging unit is sufficient to seal one half of the enclosure.

Installation and Mounting

Installation is carried out using the included fastening elements, which are inserted into the designated holes in the enclosure. Fastening is done using screws or similar elements included in the delivery. The plate is positioned in the lower level of the enclosure, with exact placement determined by the holes in the enclosure housing. Installation requires no additional tools beyond a screwdriver or appropriate wrench. The fastening elements ensure a secure connection that remains stable even under mechanical stress.

Operational Advantages

The base plate enables organized use of the base area in enclosures, improving cable management. The integrated earthing points and equipotential bonding enhance electrical safety. The zinc-coated surface ensures longer service life, especially in humid or corrosive environments. Simple installation and a clear delivery scope facilitate setup. The product is designed for use in industrial installations, where reliability and safety are paramount.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1909182
qrcode für Rittal 8001211 VX base plate 800 mm