| General |
| Model | Surge protection Type 3 |
| Material | Aluminium extruded profile, anodized |
| Colour | RAL 9005 |
| Scope of delivery | Including mounting hardware |
| Nominal power | 3,7 kW |
| Electrical connection type | CEE plug/coupler |
| Rated current (max.) | 16 A |
| Policies | Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU |
| Standards | IEC 61 643-11, EN 61 643-11 |
| Width | 44 mm |
| Height | 75 mm |
| Length | 250 mm |
| Input cable connection (type/length) | H05VV-F5G2.5, 1 m |
| Connection output cable (type/length) | H05VV-F5G2.5, 2 m |
The Rittal DK 7979721 is an overvoltage protection module of Type 3, specifically designed for end-device protection in 19-inch technology and enclosures. It serves as the final stage in the overvoltage protection chain and protects sensitive electronic components from transient voltage surges caused by lightning strikes or network disturbances. The module is rated for a nominal power of 3.7 kW and a maximum nominal current of 16 A, operating in a single-phase network (1~). The connection is made via CEE plug/coupling, ensuring a secure and standardized connection. The electrical connection is achieved through pre-installed cables: an input cable of type H05VV-F5G2.5 with a length of 1 m and an output cable of the same type with a length of 2 m. This pre-wired configuration enables immediate installation without additional mounting work.
Applications
The module is universally applicable in IT infrastructures, server rooms, data centers, and other installations where sensitive electronic devices must be protected from transient overvoltages. It is specifically designed for mounting on the enclosure frame, making it ideal for use in 19-inch racks. The compact design, with a width of 44 mm, height of 75 mm, and length of 250 mm, allows for space-saving installation. Mounting is done using fastening material included in the delivery scope.
Functions and Equipment in Detail
The overvoltage protection module features a potential-free alarm contact, which can transmit status messages to higher-level systems such as building automation (BMS). This enables centralized monitoring of the protection module and early response in case of defects. Additionally, an optical status monitoring is integrated directly into the surge arrester, visually indicating the operating status. The module is designed as a plug-in unit, enabling easy maintenance: in case of failure, the surge arrester can be replaced without interrupting the power supply, thereby increasing system availability.
Technology Explained Simply
The Type 3 overvoltage protection is the final stage in the protection chain and directly protects the connected end devices. It operates in combination with previous protection stages (Type 1 and Type 2) in the building or distribution network. The module responds to voltage surges exceeding a specific threshold and safely diverts the overvoltage to protect the connected devices. The materials used consist of an aluminum extruded profile, anodized, ensuring high mechanical stability and corrosion resistance. The color is RAL 9005, a dark gray finish, which visually integrates well into typical enclosure environments.
Compatibility and Accessories
The module is immediately ready for use in TN-S networks. It is part of a product family that also includes versions for 32 A and 3-phase installations. The pre-installed connection cables with CEE connectors enable easy integration into existing systems. Conformity with standards is ensured by compliance with IEC 61 643-11 and EN 61 643-11. Compliance with the Low Voltage Directive 2014/35/EU and the EMC Directive 2014/30/EU ensures safety and electromagnetic compatibility.
Mounting and Installation
Mounting is done directly onto the enclosure frame using the included fastening material. The pre-wired configuration with CEE connectors reduces installation time and minimizes error sources. The connection paths L/N and N/PE are pre-defined, ensuring clear and unambiguous wiring. Installation requires no special tools or additional components.
Advantages in Operation
Thanks to its ready-to-use design and user-friendly plug-in technology, the module offers high operational reliability. Status monitoring via the alarm contact and optical indicator enables proactive maintenance and prevents unexpected failures. The compact design and universal applicability make the module a flexible solution for various application scenarios in IT and electrical engineering. The material selection and compliance with international standards guarantee long service life and reliable operation.
Overvoltage protection,
Type 3,
CEE plug/coupling,
alarm contact,
aluminum extruded profile,
TN-S network are the key technical features characterizing the product and relevant to the user. The pre-wired configuration and mounting on the enclosure frame are decisive advantages for quick and secure installation in existing systems.