| General |
| Model | PDU, managed |
| Material | Aluminium profile, black anodised, mounting slots: plastic |
| Scope of delivery | Including mounting hardware |
| Options | Overvoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available |
| Width | 44 mm |
| Depth | 70 mm |
| Length | 845 mm |
| Number of sockets and type | 12 x C13 / 1 x C19 |
| Socket outlets | 12 x C 13, 1 x C 19 |
| Rated operating voltage | 230 V (AC) |
| Rated current (max.) | 16 A |
| Nominal power | 3,7 kW |
| Power supplies | Number: 1, Phases per input: 1~ |
| Connection cable length | 3 m |
| Electrical connection type | CEE |
| Interfaces | USB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s |
| Policies | EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU |
| Standards | EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21 |
| Protocols | Web server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer) |
| Operating temperature range | 5 °C...50 °C |
| Humidity (non-condensing) | 10...95 % |
| Storage temperature range | -20 °C...70 °C |
| Suitable for | Housing type: VX IT cabinet frame: ≥ 1,200 mm, housing type: VX IT 19"-profile rails: ≥ 1,200 mm |
The Rittal DK 7979410 is a
managed PDU (Power Distribution Unit) for use in IT network and server racks. It is designed for power distribution and monitoring in 48,3 cm ( 19 inch ) enclosures and offers comprehensive energy measurement and switching functions for each individual output socket. The device is housed in a compact aluminium profile with a black anodized surface and features an integrated control and display unit. The PDU is rated for a nominal operating voltage of 230 V (AC) and supports a nominal current of up to 16 A, corresponding to a nominal power of 3.7 kW. Power supply is via a CEE connector with a cable length of 3 m. The PDU is self-powered, so no external power supply is required.
Applications
The PDU is specifically designed for use in IT infrastructures, particularly in racks of the Rittal VX IT or TS IT type. When mounted vertically, it can be installed tool-free in the Zero-U-Space, minimizing rack space requirements. The colour-coded phase marking (L1=pink, L2=black, L3=white) simplifies assignment and maintenance. The PDU is suitable for enclosure types with a minimum length of 1,200 mm, both for VX IT frame enclosures and 48,3 cm ( 19 inch ) profile rails.
Functions and Equipment in Detail
The PDU features 12 C13 sockets and one C19 socket, suitable for powering IT devices such as servers, switches, or network equipment. The sockets are made of plastic. The integrated control allows setting of limit values for voltage, current, and power per output socket, enabling warnings or alarms to be triggered in case of exceedance. Measurement accuracy is ±1 % (kWh) according to standard EN 62 053-21. The PDU offers programmable power-on behaviour after voltage recovery (on, off, last state) as well as programmable switching behaviour based on time or logical conditions. Relay states are retained even during power failure, enabling stable recovery.
Technology Explained Simply
The PDU is equipped with a powerful CPU (ARM Cortex A8) that enables processing of measurement and control data. The integrated real-time clock with battery backup (up to 10 years, replaceable) ensures time accuracy for measurements and logs. An integrated electromagnetic buzzer provides acoustic alarm signaling. The PDU is redundantly powered from all phases, ensuring fault-tolerant operation. The display unit is rotatable by 180° and replaceable, ensuring optimal readability in various mounting positions. The display is a bright TFT display with 128x128 pixels (RGB) and backlighting, showing performance data and basic configuration. Multicoloured LEDs (green/yellow/red) indicate the switching state and limit values per output socket.
Compatibility and Accessories
The PDU supports connection of CMC III CAN-Bus sensors for environmental monitoring, with up to 16 sensors connectable. Optionally, a Type 3 surge protection device with replaceable discharge elements during operation can be integrated, equipped with status monitoring. Differential current measurement (Type B) is possible per input, phase, or fuse. The PDU can be extended with a Type 3 surge protection module. Additionally, covers for C13 and C19 sockets, mounting adapters, universal locking mechanisms, and a numeric code lock for CMC III are available. The PDU is equipped with an RJ45 port for the CAN-Bus interface, used for connecting environmental sensors.
Mounting and Installation
Mounting is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes the required mounting hardware. The PDU is designed for vertical mounting, with the display unit rotatable depending on the mounting position. The 3 m long connection cable allows flexible placement of the CEE plug.
Operational Advantages
The PDU offers high operational reliability through redundant power supply and integrated fault detection. Detailed energy measurement per output socket enables precise load monitoring and optimization. Network interfaces (Ethernet, USB, RS232) allow remote control, configuration, and data transmission. Support for protocols such as SNMP, Modbus/TCP, OPC-UA, and MIB enables integration into DCIM software. E-mail alerting (SMTP) and connection to Syslog servers (up to 2 servers) support network monitoring. User management with rights management and integration with LDAP(S), Radius, or Active Directory enables secure access control. The PDU is designed for operating temperatures from 5 °C to 50 °C and humidity from 10 to 95 % (non-condensing). The storage temperature range is -20 °C to 70 °C.
The PDU complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU, as well as standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, and EN 62053-21. Interfaces include a fully redundant Ethernet interface (10/100/1000 Mbit/s), a USB 2.0 port (USB-A) for mass configuration, firmware updates, and data logging, a CAN-Bus interface (RJ45) for environmental sensors, a serial interface RS232 (RJ12) for LTE unit, scripting, and CLI, as well as support for TLS 1.2, SMTP, LDAP(S), Radius, Active Directory, and Syslog. Protocols include HTTP, HTTPS, SSL, SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB, and FTP/SFTP.