Rittal 7979320, EAN: 4069196015140

Rittal 7979320 PDU switched 16A 1-phase 12xC13+12xCombi

19 Inch-Technology > Accessories/Equipment > Energy Management

Rittal 7979320 PDU switched 16A 1-phase 12xC13+12xCombi

Lieske Part No. 894310
Mfg Part No 7979320
EAN-Code 4069196015140
Manufacturer Rittal
Here only 1.279,95 EUR
1.523,14 EUR incl. VAT

Further information for Rittal 7979320 PDU switched 16A 1-phase 12xC13+12xCombi

General
ModelPDU, switched
MaterialAluminium profile, black anodised, mounting slots: plastic
Scope of deliveryIncluding mounting hardware
OptionsOvervoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available
Width44 mm
Depth70 mm
Length1.495 mm
Number of sockets and type12 x C13 / 12x Combi (C13/C19)
Rated operating voltage230 V AC
Rated current (max.)16 A
Nominal power3,7 kW
Power suppliesNumber: 1, Phases per input: 1~
Connection cable length3 m
Electrical connection typeCEE
InterfacesUSB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s
PoliciesEMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
StandardsEN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21
ProtocolsWeb server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer)
Operating temperature range5 °C...50 °C
Humidity (non-condensing)10...95 %
Storage temperature range-20 °C...70 °C
Suitable forHousing type: VX IT cabinet frame: ≥ 1,800 mm, housing type: VX IT 19"-profile rails: ≥ 1,800 mm
The Rittal DK 7979320 is a switched PDU (Power Distribution Unit) for use in IT network and server racks. It serves as an intelligent power distribution unit with integrated energy measurement per phase and enables individual switching control of the output sockets. The device is housed in a compact aluminium profile with a black anodised surface and is suitable for vertical mounting in the Zero-U-Space of Rittal VX IT or TS IT racks, with tool-free installation. The PDU is self-powered and does not require an external power supply.

Applications

The PDU is designed for use in professional IT infrastructures, particularly in data centres, server rooms and network 19-inch enclosures. It enables precise energy management and monitoring, thereby increasing the efficiency of IT systems and improving availability through targeted switching operations. The integrated energy measurement per phase allows detailed analysis of energy consumption, with a measurement accuracy of ±1 % (kWh) according to EN 62053-21. The PDU is rated for an operating voltage of 230 V AC and supports a nominal current of up to 16 A, corresponding to a nominal power of 3.7 kW.

Functions and Equipment in Detail

The PDU features 12 C13 sockets and 12 Combi-sockets (C13/C19), each individually switchable via a network interface. The switching function is performed by bistable relays, which allow low power consumption and high switching capacity even at high inrush currents (up to max. 300 A). The relay states are retained even during power failure. The PDU offers programmable switching behaviour, including sequential switching of outputs after power restoration to avoid overloads. Additionally, the switching behaviour after power restoration can be programmed (on, off, last status). An operating hour counter (total and cyclic, resettable) enables tracking of usage duration.

Technology Explained Simply

The PDU is equipped with an integrated, fully redundant power supply unit that can be powered from all phases, ensuring fault-tolerant power supply. Control is performed by a powerful CPU (ARM Cortex A8). A bright TFT display (128x128 pixels, RGB, with backlight) shows performance data and basic configuration. The display is rotatable by 180° and replaceable. Multicoloured LEDs (green/yellow/red) indicate switching states and warning or alarm thresholds per phase. An integrated electromagnetic buzzer provides acoustic alarm signalling. The PDU includes an integrated real-time clock with battery backup (max. 10 years, replaceable), which continues to run even during power failure.

Compatibility and Accessories

The PDU is suitable for enclosure types VX IT with cabinet frames ≥ 1,800 mm or 19-inch profile rails ≥ 1,800 mm. The supply cable is 3 m long and fitted with a CEE plug. The PDU supports connection to CMC III CAN-Bus sensors for environmental monitoring (max. 16 sensors). Optionally, a Type 3 surge protection device with replaceable discharge elements during operation can be integrated, with its status being monitored. Differential current measurement (Type B) per input, phase or fuse is also possible. The PDU can operate in an emergency power mode via PoE (Power over Ethernet), ensuring the web server remains accessible even during power failure.

Mounting and Installation

Mounting is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes mounting hardware. The PDU is designed for vertical mounting, with phase colour coding (L1=pink, L2=black, L3=white) enabling easy identification. The supply cable is 3 m long and fitted with a CEE plug.

Operational Advantages

The PDU offers comprehensive monitoring functions with adjustable thresholds for voltage, current and power. When these thresholds are exceeded, warnings or alarms are triggered, which can be sent via email (SMTP). User management with rights management enables secure access control. The PDU supports integration with LDAP(S), Radius or Active Directory. An integrated interface for Syslog servers (max. 2 servers) enables event logging. The PDU is designed for operation at temperatures from 5 °C to 50 °C and humidity from 10 % to 95 % (non-condensing). Storage is possible at -20 °C to 70 °C. The PDU supports various protocols including HTTP, HTTPS, SSL, SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA and FTP/SFTP. Integration into 3rd-party DCIM software is possible via MIB. The PDU features a serial interface RS232 (RJ12) for LTE unit, scripting and CLI, as well as a CAN-Bus interface (RJ45) for environmental sensors. A USB 2.0 port (USB-A) is provided for mass configuration, firmware updates and data recording. The PDU complies with standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6 and EN 62053-21, as well as directives EMV Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/894310
qrcode für Rittal 7979320 PDU switched 16A 1-phase 12xC13+12xCombi