| General |
| Model | 2nd generation, ventilated, with side walls |
| Material | Roof: steel sheet, 1.5 mm, cabinet frame: steel sheet, 1.5 mm, door: steel sheet, 1.2 mm, 19“ profile rails: steel sheet, 2 mm, side wall: steel sheet, 1.2 mm |
| Surface protection | Cabinet frame: dip-primed, flat parts: dip-primed, powder-coated |
| Colour | RAL 7035 |
| Scope of delivery | Cabinet with ventilated front door and rear door, cabinet frame, with 19" mounting rails front and rear, side panels, bolted roof sheet with double-sided concealed cable entry over full cabinet depth, and central concealed opening for easy integration of a fan module. |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 1.000 mm |
| Height units | 42 HE |
| Layer spacing (as delivered) | 645 mm |
| Door configuration | ventilated |
| Door configuration rear | Steel sheet door, single-piece ventilated |
| Front door configuration | Steel sheet door, single-piece ventilated, free area in perforated sheet section approx. 78 % |
| Load capacity | 5000 N |
| Base material | steel sheet |
The Rittal network cabinet TX 7888831 is a ventilated IT cabinet of the 2nd generation, designed for use in server and network environments. It features dimensions of 800 mm width, 2000 mm height, and 1000 mm depth, providing a mounting height of 42 U. The enclosure is made of steel sheet, with the cabinet frame and roof having a sheet thickness of 1.5 mm, the doors and side panels 1.2 mm, and the 19“ profile rails 2 mm. The surface is dip-primed and powder-coated in the colour RAL 7035. The construction allows for flexible mounting of IT components through integrated system perforation in a 25 mm grid. The front and rear 19“ profile rails are adjustable in depth and allow individual adaptation to devices. The load capacity of the cabinet is 5000 N, equivalent to a maximum static load of 500 kg.
Applications
The cabinet is designed for use in data centres, server rooms, and IT infrastructures where efficient ventilation and cable management are required. The ventilated front and rear doors, with a free ventilation area of approximately 78%, support passive cooling and ensure optimal air circulation. The side panels are screwed, enabling quick access to the internal equipment. The roof plate is also screwed and provides concealed cable entries on both sides across the entire cabinet depth, as well as a central, concealed opening for integrating a fan module. This construction promotes structured cable routing and facilitates maintenance.
Functions and Equipment in Detail
The enclosure is supplied with a cabinet frame, ventilated front and rear doors, side panels, and a screwed roof plate. The doors are single-piece, double-hinged, and feature a design handle as well as a 2-point rod lock with safety locking 3524 E. Door hinge reversal is possible, and the opening angle is 135° for single installation and 105° in baying. The hinges are equipped with non-removable hinge pins. The base frame is open, without base sheets, and can optionally be fitted with base modules from the accessory range.
Technology Explained Simply
The front and rear 19“ profile rails are adjustable in depth, enabling flexible mounting of devices. The integrated system perforation in a 25 mm grid allows easy hanging and securing of expansion components. The roof plate is rotatable and can be used for cable routing at the front or rear. Optionally, it can be raised using spacers to support passive ventilation. The construction from rolled and 16-fold bent vertical profiles ensures high torsional stiffness and stability of the cabinet.
Compatibility and Accessories
The cabinet is compatible with a comprehensive accessory range, including cable management panels, cable ladders, levelling feet, component shelves, cable ducts, and base sheets. These components enable individual interior fitting and optimized cable routing. Suitable accessories include cable management panels in various heights, cable ladders for 1 U and 4 U, levelling feet with an adjustment height of 18–43 mm, as well as base sheets and cable ducts in RAL 9005. The cabinets can be bayed front and rear, as well as laterally.
Mounting and Installation
Mounting is done via the integrated system holes in a 25 mm grid. The 19“ profile rails are mounted at the front and rear and can be adjusted in depth. The side panels are screwed, allowing quick access. The roof plate is also screwed and can be used for cable routing at the front or rear. The doors are double-hinged and can be reversed in opening direction. The base construction is open, allowing individual base modules to be installed.
Operational Advantages
The cabinet offers a high load capacity of 5000 N, enabling secure mounting of heavy IT components. The ventilated doors with 78% free area ensure efficient cooling. The concealed cable entries and the central opening in the roof plate facilitate cable routing and integration of fan modules. The screwed side and roof panels allow quick access and flexible adaptation. The open base construction offers flexibility in fitting with base modules. The construction is designed for use in data centres and IT infrastructures and supports structured and maintenance-friendly installation.
Accessories and Alternatives
Suitable accessories include cable management panels in various heights, cable ladders for 1 U and 4 U, levelling feet, component shelves, cable ducts, and base sheets. These components enable individual interior fitting and optimized cable routing. The cabinets can be bayed front and rear, as well as laterally.