| General |
| Model | 2nd generation, with sight door, with side walls, with roof sheet |
| Material | Roof: steel sheet, 1.5 mm, cabinet frame: steel sheet, 1.5 mm, profile rails: steel sheet, 2 mm, side wall: steel sheet, 1.2 mm |
| Surface protection | Cabinet frame: dip-primed, flat parts: dip-primed, powder-coated |
| Basic colour | RAL 7035 |
| Colour | RAL 7035 |
| Scope of delivery | Cabinet with front vision door and rear door, cabinet frame, with 19" profile rails front and rear, side panels, bolted roof sheet with concealed, rear cable entry in transverse direction and central, concealed opening for easy integration of a fan module. |
| Width | 600 mm |
| Height | 1.200 mm |
| Depth | 600 mm |
| Height units | 24 HE |
| Layer spacing (as delivered) | 345 mm |
| Door configuration rear | steel sheet door, single-piece |
| Front door configuration | Vision door, single-piece |
| Load capacity | 5000 N |
| Load capacity (static) | 500 kg |
| Degree of protection IP according to EN 60 529 | IP 20 |
| Note | For installation of a fan module, brush strips are required for equipping the cable passage openings, if these are used or the cover plates have been removed. Brush strips for covering the cable entry are available separately and can be conveniently ordered through our accessory range. |
| Base material | steel sheet |
The Rittal TX 7888616 is a second-generation network enclosure from the TX CableNet series, specifically designed for housing IT and electrical components in spaces with limited room, low ceiling heights, or difficult access. The enclosure features a front viewing door made of 3 mm toughened safety glass (ESG) and a single-piece, solid steel door at the rear, providing clear visibility of installed devices while protecting the back side. Dimensions are 600 mm width, 1200 mm height, and 600 mm depth, corresponding to an expansion size of 24 height units (HE). The mounting pitch in the delivered state is 345 mm. The enclosure frame is made of 1.5 mm thick steel sheet, dip-primed, while flat parts are powder-coated. The surface is finished in RAL 7035, a neutral gray tone that integrates well in technical environments.
Applications
This enclosure is suitable for installing network and IT infrastructure in smaller IT environments, such as office buildings, administrative buildings, or industrial facilities where space is limited. Its compact design without excessive width or depth allows for efficient use of available space. The integrated 48,3 cm ( 19 inch ) profile rail system at the front and rear, adjustable in depth, offers flexibility for device mounting. The side panels are screwed, enabling quick access to the interior of the enclosure, for example, for maintenance or expansions.
Functions and Equipment in Detail
The enclosure is equipped with a screwed roof plate made of 1.5 mm steel sheet, providing concealed, rear cable entry in the transverse direction and a central, concealed opening for integrating a fan module. This construction optimizes cabling and enables organized cable routing. The profile rails are made of 2 mm thick steel sheet and allow mounting of devices on both sides of the enclosure. The static load capacity is 500 kg, ensuring high load-bearing capability for use in industrial or server-based environments. The protection class IP 20 according to EN 60 529 protects against finger contact and solid foreign objects, but is not suitable for outdoor use or humid environments.
Technology Explained Simply
The frame concept of the enclosure is torsionally rigid and welded, consisting of rolled and 16-fold flanged vertical profiles connected with a horizontal frame at the bottom and cross profiles. The integrated system perforation in a 25 mm grid enables flexible component mounting. The vertical profiles feature two mounting planes offset in depth and width, which can be used individually to allow device mounting at different positions. The baying of enclosures is possible at the front, rear, and sides, enabling flexible arrangement in rows or arrays. The base frame is open, without base plates, and can optionally be fitted with base modules from the accessory program.
Compatibility and Accessories
Various accessories are available for individual interior fitting and expansion of the enclosure. These include cable management panels in different heights (1 HE, 2 HE), cable rungs in various designs (e.g., 1 HE, 4 HE), cable guides, blanking panels, levelling feet, and a transport kit for safe transportation. The brush kit for TX CableNet is also available in the accessory program.
Mounting and Installation
Mounting is done via the integrated system holes in a 25 mm grid, allowing components to be easily hung and secured. The adjustable 48,3 cm ( 19 inch ) profile rails enable customizable depth to mount devices of different heights. The screwed side panels and roof plate facilitate access and maintenance. The front and rear doors are double-hinged, equipped with a safety lock (Safety lock 3524 E), and can optionally be fitted with an AX comfort handle. The door opening angle is 135° for single mounting and 105° for baying. The door hinges feature secured hinge pins, preventing loss of the hinges.
Operational Advantages
The enclosure offers optimal use of available volume, particularly through the new roof plate concept that efficiently organizes cabling. The integrated profile rails and flexible mounting system allow individual adaptation to specific requirements. The high static load capacity of 500 kg makes the enclosure suitable for demanding industrial applications. The screwed side panels and roof plate facilitate maintenance and expansions. The comprehensive accessory program enables customized interior fitting to meet specific operational needs. The protection class IP 20 provides sufficient protection for indoor use where no special environmental conditions such as humidity or dust prevail.