| General |
| Material | Plastic carrier with brush set, brush strip: plastic, UL 94-V0, bristles: plastic, UL 94-HB |
| Bristle length | 70 mm |
| Suitable for | Enclosure type: TX CableNet, depth: = 600 mm, = 800 mm, = 1.000 mm |
The Rittal TX 7888300 is a
brush strip for cable entry in the roof area of enclosures of type
TX CableNet. It serves to enhance the visual appearance and simultaneously shield cable openings in the roof plate by concealing the cut edges. The strip is clipped onto both sides of the cutout, enabling a clean, professional cabling without visible cable openings. The brush strip consists of a
plastic carrier with integrated brush bristles, where the strip itself is made of
plastic UL 94-V0 and the bristles are made of
plastic UL 94-HB. The
bristle length is 70 mm, ensuring effective sealing against dust and small particles without hindering cable routing.
Applications
The brush strip is specifically designed for enclosures of type TX CableNet with depths of 600 mm, 800 mm, or 1,000 mm. It is used during cable installation in the roof area to close openings after cabling. The strip is supplied in sufficient length to accommodate enclosure widths and depths of 600, 800, 1000, and 1200 mm, and can be shortened as needed. This allows flexible adaptation to different enclosure sizes within the TX CableNet system.
Functions and Equipment in Detail
The brush strip is simply clipped onto the cut edge of the roof plate, enabling quick and tool-free installation. The
height of the brush head strip is 7.6 mm, and the total length of the strip is 860 mm with a width of 88 mm. The bristles are made of a flexible plastic material that ensures dense coverage of the opening without damaging the cables. The materials comply with fire protection classes UL 94-V0 (for the strip) and UL 94-HB (for the bristles), ensuring high safety in industrial environments.
Technology Explained Simply
The brush strip functions as a mechanical cover that seals the cable opening in the roof plate. The bristles form a dense barrier that retains dust, insects, and other small particles, while remaining flexible enough to allow cables to pass through without damage. The use of UL 94-V0 and UL 94-HB materials ensures high heat resistance and self-extinguishing properties, which are especially important in electrical switchgear. The strip is not designed for sealing against water or high humidity, but primarily serves visual enhancement and mechanical shielding.
Compatibility and Accessories
The brush strip is exclusively intended for enclosures of type
TX CableNet with the specified depths (600, 800, 1000 mm). It is part of a brush kit, delivered in a packaging unit containing two brush strips. The strips can be shortened according to enclosure size to ensure a precise fit.
Installation and Mounting
Installation is performed by simply clipping the brush strip onto the cut edge of the roof plate. No additional tools or mounting materials are required. The strip is installed on both sides of the cable opening to ensure complete coverage. The strip's length is designed to be compatible with various enclosure sizes, with shortening possible as needed.
Operational Advantages
The brush strip improves the visual appearance of enclosures by concealing unsightly cable openings. At the same time, it provides mechanical shielding against dust and small particles, simplifying cleaning and maintenance of the switchgear. The tool-free installation reduces installation effort and enables quick commissioning. The use of high-quality plastics ensures long service life and high operational safety.