The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected.
Benefits: Modules may be retrofitted whilst operational.
Technical specifications: Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection.
Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
3-phase redundant infeed supported.
The redundant circuit is completely separate from the 3 phases of the support rail.
Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
Packs of: 1 pc(s).
EAN: 4028177579200
Customs tariff number: 85369001
eCl@ss 5.1: 27143401
eCl@ss 7.0: 27371306
ETIM 6.0: EC000215

Design: With 3 m connection cable (connector type CEE/EN 60 309)
Module slots (max.): 7
To fit: Enclosure type: TS 8
Enclosure type: TS IT
Height: = 2000 mm
Infeeds: Qty.: 1
Phases per infeed: 3~
Length of connection cable: 3 m
Ambient conditions: Operating temperature: +5°C...+45°C
Storage temperature: -20°C...+60°C
Operating humidity, non-condensing: 5 % - 95 %
Type of electrical connection: CEE
Rated current (max.): 16 A
Weight/pack: 4.9 kg