Rittal 7030128, EAN: 4028177925830

Rittal 7030128 patch cable Cat6

Cables > Data lines > Cat6 Patch Cable

Rittal 7030128 patch cable Cat6

Lieske Part No. 1714667
Mfg Part No 7030128
EAN-Code 4028177925830
Manufacturer Rittal
Here only 58,08 EUR
69,12 EUR incl. VAT

Further information for Rittal 7030128 patch cable Cat6

General
ModelAccess sensor VX
ApplicationsMonitoring of cabinets in IT, industry and building technology. Monitoring of cabinets, rooms and containers in IT environment.
Function principleCollection of physical environmental parameters
MaterialPlastic
Scope of deliverySensor, mounting plate, including fastening material, access sensor VX, cable 0.5 m
Connection to CAN busindirect via CMC III CAN bus interfaces
Operating temperature range5 °C...45 °C
Humidity (non-condensing)5...95 %
PCF/VE (Cradle-to-Gate)0.3 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal CMC III access sensor VX (type DK 7030128) is a sensor for monitoring the physical environment, specifically designed for use in IT enclosures, industrial systems, and building technology. It is used to detect access events to enclosures, rooms, or containers in IT environments and enables reliable status monitoring. The function is based on the detection of environmental parameters, with the sensor operating via a reed contact and a magnet. Up to five reed contacts can be connected in series, allowing flexible adaptation to different mounting conditions. The sensor is made of plastic and is therefore robust and easy to install.

Applications

The access sensor VX is primarily intended for monitoring enclosures in IT infrastructures, industrial control systems, and building technology. It is suitable for detecting opening and closing events on enclosure doors, container covers, or room access areas. The application is particularly relevant in environments where documented access control or alarm triggering upon unauthorized access is required. Typical installation locations include server rooms, control centers, or technical rooms, where continuous monitoring of physical security is important.

Functions and Equipment in Detail

The sensor detects physical environmental parameters, particularly the state of the enclosure door (open/closed), and transmits this information via a CAN-Bus system. The connection to the CAN-Bus is made indirectly through CMC III CAN-Bus interfaces. Installation is quick and easy thanks to the Plug-&-Play function, as the sensor is automatically recognized. The delivery includes the access sensor VX, a mounting plate, and fastening material. An integrated cable with a length of 0.5 m is also included to enable connection to the interface.

Technology Explained Simply

The sensor uses a reed contact activated by a magnet. When the enclosure door is opened, the magnet moves away from the reed contact, opening the contact and generating a signal. This signal is transmitted via the CAN-Bus system to the higher-level control unit (PU). Communication takes place via an RJ45 connection cable, which can be directly connected to the PU. The sensors can also be connected to each other in a bus configuration, enabling expansion of the monitoring environment. The operating temperature ranges from 5 °C to 45 °C, and the relative humidity (non-condensing) is 5 to 95 %. These values ensure stable operation under typical indoor conditions.

Compatibility and Accessories

The access sensor VX is specifically developed for use in the CMC III system by Rittal. It is compatible with CMC III CAN-Bus interfaces and can be integrated into the monitoring system via these. As an accessory, an extension cable PSM RJ12 with a length of 1.0 m is available, which can extend the connection length between sensor and interface if the standard cable length of 0.5 m is insufficient. The extension is made via the RJ45 connector system, which is standardized for CAN-Bus connections.

Mounting and Installation

Mounting is performed on the enclosure door or the enclosure body using the included mounting plate and fastening material. The reed contact is mounted on the fixed side, and the magnet on the movable side (e.g., door). Positioning must ensure that the magnet touches the reed contact when the door is closed and separates from it when opened. Connection to the CMC III CAN-Bus interface is made via the included 0.5 m cable.

Advantages in Operation

The sensor provides a reliable and low-maintenance monitoring solution. Power supply via the CAN-Bus reduces the number of required cables and simplifies installation. The Plug-&-Play function enables quick commissioning without manual configuration. Integration into existing CMC III systems is straightforward, ensuring system compatibility. The use of up to five reed contacts in series increases flexibility during mounting and allows adaptation to different enclosure constructions. The operating parameters (temperature, humidity) cover most indoor environments, making the sensor suitable for a wide range of applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1714667
qrcode für Rittal 7030128 patch cable Cat6