Rittal 7010160, EAN: 4069196000658

Rittal 7010160 vandalism sensor CMC III

Cables > Data lines > Cat6 Patch Cable

Rittal 7010160 vandalism sensor CMC III

Lieske Part No. 611937
Mfg Part No 7010160
EAN-Code 4069196000658
Manufacturer Rittal
Here only 101,67 EUR
120,99 EUR incl. VAT

Further information for Rittal 7010160 vandalism sensor CMC III

General
ModelAccess Monitoring-Sensor
ApplicationsMonitoring of cabinets in IT, industry and building technology. Monitoring of cabinets, rooms and containers in IT environment.
MaterialPlastic
Surface protectionFront: smooth, Housing: textured
ColourRAL 9005
Scope of deliverySensor, mounting plate, including fastening material
Connection to CAN busDirect
Interfaces2 x RJ45 CAN-bus
Width110 mm
Height30 mm
Depth40 mm
Operating temperature range0 °C...55 °C
Humidity (non-condensing)5...95 %
The Rittal DK 7010160 is an Access Monitoring-Sensor for monitoring enclosures, rooms and containers in IT, industrial and building technology environments. The sensor enables detection of door states and identification of vandalism through integrated sensor technology and is connected to systems such as CMC III, PDU, LCP or IoT Interface via a CAN-Bus interface. The compact housing made of plastic in the colour RAL 9005 features a smooth front and structured housing and measures 110 mm (width) × 30 mm (height) × 40 mm (depth). The operating temperature ranges from 0 °C to 55 °C, and the relative humidity (non-condensing) from 5 % to 95 %.

Applications

The sensor is primarily used for monitoring enclosure doors, but can also monitor side panels, roof plates or room doors. It is suitable for use in IT infrastructures, industrial plants and building technology, where physical security of devices and rooms must be monitored. Connection is made directly to embedded devices, and sensors can be connected to each other in a bus configuration.

Functions and equipment in detail

The sensor features an integrated infrared transmitter and receiver. The infrared light is directed at the door and reflected back by a reflector strip mounted on the door. If the light is reflected, the sensor reports the door as closed; if the light beam is interrupted, the state is reported as open. The distance setting between sensor and door can be adjusted via the software of the embedded device and is stored in the sensor. Additionally, the sensor integrates an accelerometer that measures vibrations along the three axes x, y and z. This enables detection of vandalism or unauthorised access, such as when an enclosure is moved, shaken or tipped over. The measurement range is between -7 g and +7 g with a resolution of 0.1 g.

Technology explained simply

Communication takes place via two RJ45 connectors with integrated CAN-Bus. The connection is Plug & Play, meaning the sensor is automatically recognised by the embedded device and assigned a sequential number in the bus sequence. Power supply is provided via the CAN-Bus interface, simplifying installation. The protection rating IP 20 according to EN 60 529 protects the sensor against contact with fingers and vertical dripping water, but not against splashing water or dust. The integrated multicolour LED serves as a status indicator for operation and communication.

Compatibility and accessories

The sensor is designed for connection to CMC III, PDU, LCP and IoT Interface. Settings can be adjusted via these devices. Sensors can be connected in a bus topology, allowing multiple sensors to be operated within one system. Use requires an embedded device that evaluates the data and may trigger alarms.

Mounting and installation

The sensor is mounted on the enclosure frame and aligned with the door. Mounting is done using the included mounting plate and fastening materials. Positioning is critical for correct functionality, especially for infrared reflection and vibration detection.

Operational advantages

The sensor provides reliable, automatic detection of door states and vandalism. The Plug & Play function reduces installation time, and power supply via CAN-Bus reduces the number of required cables. The integrated LED indicator allows for quick visual inspection of operational status. The sensors are designed for use in industrial and IT environments where continuous physical monitoring is required.

The delivery includes the sensor, a mounting plate and fastening materials. A quick start guide is also included.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/611937
qrcode für Rittal 7010160 vandalism sensor CMC III