| General |
| Model | with mounting arm connection 90 x 71 mm for CP 40, steel |
| Material | Roof pan, base pan: zinc die-cast, back panel: aluminium, side parts: aluminium extruded profile, screw cover: plastic |
| Surface protection | Roof panel, base panel, side parts: powder-coated, rear panel: natural anodized |
| Colour | RAL 7024 |
| Scope of delivery | Roof pan, floor pan, rear panel, side parts, screw cover, including seal and screwdriver |
| Width | 241 mm |
| Height | 238 mm |
| Depth | 87 mm |
| Degree of protection IP according to IEC 60 529 | IP 65 |
| NEMA degree of protection | NEMA 12 |
| Suitable for front panel width | 178 mm |
| Suitable for front panel height | 200 mm |
| Base material | Aluminium |
For small operating units built into front panels. The front panel is inserted from the rear and secured with screw clamps. Special front panels with a material thickness of between 2 and 6 mm are possible. Rear panel optionally hinged on the left or right. Roof tray with cut-out and reinforcement for support arm system CP 40 steel.
Material: Roof tray, base tray, rear panel: Aluminium
Side parts: Extruded aluminium section
Screw cover: Plastic
Surface finish: Roof tray, base tray, side parts: Powder-coated
Rear panel: natural anodised
Colour: RAL 7024
Protection category IP to IEC 60 529: IP 65
Supply includes: Roof tray
Base tray
Rear panel
Side parts
Screw cover
Seal and screw clamp
Packs of: 1 pc(s).
EAN: 4028177382688
Customs tariff number: 94039010
eCl@ss 5.1: 27180505
eCl@ss 7.0: 27180505
ETIM 6.0: EC002504
Design: with support arm connection 90 x 71 mm for CP 40, steel
For the configuration of subracks: To fit front panel width: 178 mm
Dimensions: Width: 241 mm
Height: 238 mm
Depth: 87 mm
To fit front panels: with width: 178 mm
with height: 200 mm
Weight/pack: 2.8 kg