| General |
| Material | Housing: steel sheet 1.5 mm, door: steel sheet, 2.0 mm, rear panel: steel sheet, 1.5 mm, base plates: steel sheet, 1.5 mm, mounting plate: steel sheet, 3.0 mm |
| Surface protection | Housing, door and rear panel: dip primed, externally powder coated, textured lacquer; mounting plate and base sheets: galvanised |
| Colour | RAL 7035 |
| Scope of delivery | enclosure top and sides closed, door(s), for single-door cabinets door hinge on right, reversible to left, mounting plate, base plates, rear panel, removable, locking: 3 mm double latch, 2 mounting rails 18 x 39 mm, rear panel, single-piece |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 300 mm |
| Mounting plate dimensions (W x H) | 699 mm x 1.896 mm |
| Degree of protection IP according to EN 60 529 | IP 55 |
| NEMA degree of protection | NEMA 3R, NEMA 12 |
| Type rating according to UL 50E | Type 1, Type 2, Type 3, Type 3R, Type 12 |
| IK code | IK10 |
| Number of doors | 1 |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 349.82 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SE 5823600 is a
system single enclosure made of sheet steel, designed for individual installation in industrial applications. With dimensions W x H x D 800 x 2000 x 300 mm, it provides sufficient space for mounting electrical and electronic components. The enclosure is constructed in an integral design, where the roof and side panels are manufactured as one piece with a profiled frame, accelerating assembly and increasing stability. The front side features a
single-door construction, standard right-hinged, but changeable to left-hinged. The door includes a horizontal, double-foamed seal and a bar lock with quadruple locking, as well as a double-bar lock insert according to DIN 43668. The door opening is 130° according to VDI and can be retrofitted to 180°. An automatic equipotential bonding between door and enclosure body is integrated.
Applications include industrial control systems, automation technology, and enclosures in production environments where high mechanical stability and protection against dust and splashing water are required. The enclosure is suitable for indoor and outdoor use, especially in environments with increased mechanical stress, as it features protection class
IP 55 according to EN 60 529. This means it is dust-tight and protected against splashing water from any direction. Additionally, it meets protection classes
NEMA 3R and
NEMA 12 as well as type ratings
Type 1, 2, 3, 3R, 12 according to UL 50E. The
IK code IK10 ensures high protection against mechanical impacts, such as blows with tools.
Functions and equipment in detail include a
mounting plate made of 3.0 mm sheet steel, side C-bent, and mounted depth-adjustable in 25 mm increments using integrated plastic gliding pieces and mounting rails. The mounting plate features an integrated mounting grid, simplifying component positioning. The rear panel is screwed and single-piece, with a foamed seal and automatic equipotential bonding. The base plates are made of 1.5 mm sheet steel, 3-part, removable and replaceable, also with automatic equipotential bonding. The enclosure, door, and rear panel are made of 1.5 mm or 2.0 mm sheet steel and receive a triple surface treatment: nanoceramic coating, electrophoretic dip primer, and externally powder-coated in
RAL 7035 textured lacquer. The mounting plate and base plates are galvanized.
Technology explained simply shows that the construction is based on a 25 mm DIN grid, enabling flexible and standardized mounting. Integrated mounting levels in the enclosure profile, vertical profiles, and front and rear roof frame profiles allow space-saving system expansion. The material thickness of the mounting plate (3.0 mm) ensures high load capacity and stability when mounting heavy components. The powder-coated surface in RAL 7035 provides corrosion protection and resistance against mineral oils, lubricants, machining emulsions, and solvents.
Compatibility and accessories include system compatibility with accessories of the VX25 system, enabling flexible expansion. Suitable accessories include, among others,
VX plinth corner pieces,
levelling feet,
TS lock inserts,
C-profile rails,
TS support rollers,
transport eyes, and
door latches. These components can be used to adapt to specific mounting conditions or to increase safety. The use of
TS chassis for the outer mounting level or
system chassis for the inner mounting level enables structured and secure mounting of components.
Mounting and installation is performed via the pre-fabricated integral design, where no additional side panels need to be mounted. The base plates are already welded in and consist of a base frame and multi-part, movable sheets. The mounting plate is depth-adjustable and can be positioned using integrated plastic gliding pieces and mounting rails. The rear panel is removable, enabling easy access to the interior. The door is equipped with non-removable hinge pins, simplifying assembly and maintenance.
Operational advantages lie in high mechanical stability, easy assembly due to the integral design, and flexibility in system expansion. The IP 55 protection class and IK10 rating ensure high reliability in demanding environments. The powder-coated surface in RAL 7035 offers long service life and resistance to environmental influences. Integrated mounting levels and the 25 mm grid simplify planning and installation of components. The ability to change the door hinge direction provides flexibility in room placement.
The enclosure is designed for use in industrial plants, production halls, and other environments with increased requirements for protection and stability. The combination of robust sheet steel, high-quality surface treatment, and integrated mounting functions makes it a reliable solution for industrial electrical engineering.