Rittal 5381830, EAN: 4028177950160

Rittal 5381830 VX 5381830 cable management enclosure BHT 300x2000x1200

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 5381830 VX 5381830 cable management enclosure BHT 300x2000x1200

Lieske Part No. 1775728
Mfg Part No 5381830
EAN-Code 4028177950160
Manufacturer Rittal
Here only 964,85 EUR
1.148,17 EUR incl. VAT

Further information for Rittal 5381830 VX 5381830 cable management enclosure BHT 300x2000x1200

General
ApplicationsAs cable management housing between fully populated network and server racks, As empty housing for symmetrical balancing in cold/hot aisle containment with unequal number of LCPs in two rack rows, As placeholder for easy retrofitting of LCP installations
MaterialSheet steel, aluminium
Surface protectionCabinet frame: dip-primed, doors and roof: dip-primed, powder-coated
Basic colourRAL 7035
ColourHousing: RAL 7035, Front: RAL 9005
Scope of deliverycabinet frame with front and rear door, aluminium door front, closed with black design panel, 180° hinges, sheet steel door rear, closed, single-piece, 130° hinges, locking front and rear: comfort handle for profile half-cylinder and security lock 3524 E, 2 roof/base panels, with openings for cable entry via brush strips, 3 VX System chassis mounted each on left and right
Width300 mm
Height2.000 mm
Depth1.200 mm
ModelCable management enclosure
NoteFor installation at the beginning/end of a cabinet row, a side panel is required
Base materialAluminium
The Rittal cable routing enclosure VX 5381830 is a system accessory specifically designed for use in IT infrastructures. It serves as a structured solution for routing, securing, and storing cables, particularly between fully equipped network and server racks. As a cable routing enclosure, it enables optimal accommodation of cable excess lengths and supports structured cable management. Additionally, it can be used as a blank enclosure to ensure symmetrical alignment in cold/hot aisle partitioning when the number of Liquid Cooling Packages (LCPs) differs between two rack rows. It also functions as a placeholder for future LCP installations, allowing for easy retrofitting at a later stage.

Applications
This enclosure is primarily intended for use in data centers and IT infrastructures where organized cable routing and flexible expansion capability are required. It is frequently positioned between equipped racks to organize and protect cable bundles. In cold/hot aisle systems, it serves for visual and structural balancing when the number of LCPs in adjacent rows does not match. Using it as a placeholder enables planned infrastructure expansion without requiring modifications to the existing setup.

Functions and Equipment in Detail
The enclosure consists of a steel sheet and aluminum housing, with the rack frame being dip-primed. The doors and roof are also dip-primed and powder-coated, ensuring high corrosion resistance and uniform surface quality. The front door is made of aluminum, closed, and features a black design trim panel along with 180° hinges. The rear is covered by a single-piece, closed steel sheet door with 130° hinges. Both doors are equipped with a comfort handle designed for half cylinders and the security locking system 3524 E. The color scheme corresponds to RAL 7035 for the enclosure and RAL 9005 for the front, enabling visual harmonization with other racks.

Technology Explained Simply
The construction of the enclosure is based on a pre-assembled IT rack with a torsion-resistant, welded frame structure made from rolled, 9-fold flanged, closed hollow profiles. The perforation follows a 25 mm grid, allowing flexible mounting of components. Integrated blind rivet nuts M6 enable secure, IP-rated fastening of fittings. The horizontal profiles feature an integrated groove above the PU foam seal to protect it from damage. The mounting planes are accessible from inside and outside, facilitating space-saving and quick internal installation. The square-shaped perforation around the entire frame allows the use of cage nuts and metric screws up to M8.

Compatibility and Accessories
The cable routing enclosure is equipped with 3 VX system chassis mounted on each left and right side, facilitating the integration of additional modules and components. The roof and base plates are provided with cutouts to enable cable entry via brush strips. A side panel is required for mounting at the beginning or end of a rack row. Various cable management products are available as accessories, including cable ties for C-profile rails in various diameters, cable ladders, cable managers, hook-and-loop tape holders, and hook-and-loop closures. These components support structured cable routing and securing within the enclosure.

Installation and Mounting
Installation is performed by directly screwing the enclosure to the floor using the welded base frame with integrated reinforcement. The base plates are optional and can be removed as needed to integrate custom floor modules from the accessory program. The enclosure is bayable on all sides and can thus be flexibly integrated into existing row configurations. The static load capacity is up to 15,000 N, and according to UL 2416, up to 12,000 N, ensuring high mechanical stability.

Operational Advantages
The cable routing enclosure provides a clear separation between cable routing and equipment installation, simplifying maintenance and inspection of cable systems. The structured accommodation of cable excess lengths reduces the risk of tangling and damage. Its use as a placeholder enables future-oriented infrastructure planning without requiring modifications to existing systems. The robust construction from steel sheet and aluminum, along with the powder-coated surface, ensures long service life and high resistance to environmental influences.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775728
qrcode für Rittal 5381830 VX 5381830 cable management enclosure BHT 300x2000x1200