| General |
| Material | Sheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted |
| Basic colour | RAL 7035 |
| Colour | Housing frame, rear door and roof: RAL 7035, front door: vertical profiles, silver, and horizontal profiles RAL 9005, handle and hinges: RAL 9005 |
| Width | 600 mm |
| Height | 2.200 mm |
| Depth | 800 mm |
| Height units | 47 HE |
| Roof type | One-piece, closed |
| Door configuration rear | Steel sheet door, closed, single-piece, 130° hinges |
| Front door configuration | Aluminium front door, closed, single-piece, 180° hinges |
| Profile rail version | None |
| Floor version | floor tray with floor plate, multi-part, closed |
| Mounting type for profile rail | None |
| Degree of protection IP according to EN 60 529 | IP 55 only in combination with gasket for rowing or screwed side walls |
| IK code | IK08 |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 213.1 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5331190 is a
network/server rack of the VX IT series, designed as a
blank enclosure without pre-installed 48,3 cm ( 19 inch ) internal mounting. It is intended for the protected installation of IT and electronics components in environments requiring enhanced protection. The enclosure has dimensions W x H x D 600 × 2200 × 800 mm and includes 47 height units (U), making it suitable for installing standard 48,3 cm ( 19 inch ) devices. The protection rating
IP 55 is achieved only in combination with a baying seal or screwed side panels, enabling use in industrial or outdoor environments with increased dust and splashing water hazards. The mechanical protection class
IK08 safeguards the enclosure against mechanical impacts such as shocks or vibrations.
Applications
The enclosure is designed for use in IT infrastructures, server rooms, industrial control environments, or outdoor areas where high environmental resistance is required. The closed design and integrated sealing allow for direct, enclosure-specific climate control, reducing thermal stress on installed devices. The use as a blank enclosure offers flexibility for individual equipping with profile rails, socket modules, or other components as needed.
Functions and Equipment in Detail
The front of the enclosure features an
aluminum viewing door with 180° hinges, made of 1.25 mm aluminum and 3 mm single-pane safety glass. The rear is equipped with a
closed steel door made of 1.5 mm steel sheet, featuring 130° hinges. Both doors are fitted with
comfort handles for half cylinders, enabling secure and convenient operation. The viewing door allows visual inspection of installed devices without opening the door, while the rear remains fully closed to ensure optimal protection.
Technology Explained Simply
The enclosure consists of a torsionally rigid, welded frame structure made of rolled, 9-fold bent closed hollow profiles. The perforation follows a 25 mm grid, enabling flexible mounting of internal components. The horizontal profiles feature an integrated groove above the PU foam seal, protecting the seal from mechanical damage. The profiles are identical on all sides, allowing mounting from inside and outside. The profile edges are rounded, facilitating handling and installation. The base construction consists of a multi-part base tray with a base plate, designed for direct screwing to the floor. The integrated reinforcement ensures high stability and load distribution.
Compatibility and Accessories
The enclosure is designed for mounting 48,3 cm ( 19 inch ) components, with profile rails not pre-installed. Suitable accessories include profile rails (e.g. VX-IT 5302109), component shelves, socket modules (such as PSM 6x C13 red or 4x Schuko red), connection cables (e.g. PSM 3-phase 5-pole/16 A), cable ties, cable clamps, system lights, and hook-and-loop fasteners. These components allow individual adaptation to specific requirements in IT infrastructure or industrial control technology.
Mounting and Installation
Mounting is done via integrated blind rivet nuts M6 in the frame structure, enabling protection-rated fastening of fittings. The base tray is designed for direct screwing to the floor. The baying seal and seal kit for the base plate are included in the delivery scope to ensure the IP 55 protection rating. The doors are equipped with 180° and 130° hinges, with the actual opening angle varying depending on the installation location.
Operational Advantages
The enclosure offers high mechanical and environmental resistance through the IP 55 and IK08 protection ratings. The closed design with integrated sealing supports efficient climate control. The aluminum viewing door enables visual inspection of devices, while the robust steel door protects the rear. The flexible mounting via the 25 mm perforation pattern and integrated fastening elements simplifies installation and maintenance. The use as a blank enclosure allows equipping the enclosure according to individual requirements, ensuring high adaptability to different application scenarios.