Rittal 5329111, EAN: 4028177945517

Rittal 5329111 server cabinet VX IT ventilated 42 HE

Rittal 5329111 server cabinet VX IT ventilated 42 HE

Lieske Part No. 1775796
Mfg Part No 5329111
EAN-Code 4028177945517
Manufacturer Rittal
Here only 1.260,98 EUR
1.500,57 EUR incl. VAT

Further information for Rittal 5329111 server cabinet VX IT ventilated 42 HE

General
ModelVentilated, standard, with 19" profile rails
MaterialSheet steel, aluminium, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted
Basic colourRAL 7035
ColourHousing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior fitting, front ventilation grille: RAL 9005, handle and hinges: RAL 9005
Width600 mm
Height2.000 mm
Depth600 mm
Height units42 HE
Mounting clearance to 19" plane, front/back150 mm / 449 mm
Mounting position 19" rackFront side
Layer spacing (as delivered)720 mm
19" mountingwith mounting bracket screwed to top and bottom of frame structure
Roof typemulti-part, removable, for cable entry at rear, transverse, and with covered cutout for fan panel
Door configuration rearSteel sheet door, ventilated, vertically divided, 180° hinges
Front door configurationAluminium-steel sheet door, ventilated, single-piece, 180° hinges
Profile rail version19" profile rails standard in VX IT
Floor versionOpen
19" rack configurationFront side
Mounting type for profile rail19"-level front
Load capacity7.500 N
Max. load capacity (static) according to UL 2416 per cabinet6.000 N
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)146.8 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5329111 is a ventilated network and server rack of the VX IT series, designed for use in IT infrastructures with room climate control. It features a standard 48,3 cm ( 19 inch )-profile rail configuration and is available in dimensions W x H x D 600 x 2000 x 600 mm, corresponding to a height of 42 U. The rack is designed for the installation of servers, network devices, and other IT components, with ventilated doors ensuring efficient air circulation. The front door is made of aluminium (1.25 mm) and sheet steel, while the rear door is made of sheet steel (1.5 mm), both equipped with 180° hinges. The front door is single-piece, and the rear door is vertically divided, enabling optimal accessibility and maintenance. The rack frame surface is dip-primed, the interior assembly is painted, while the rear door and roof are powder-coated. The front door is anodized/painted, with vertical profiles in silver and horizontal profiles in RAL 9005. The enclosure frames, rear door, and roof are painted in RAL 7035, while the interior assembly, front ventilation grille, handle, and hinges are in RAL 9005.

Applications

The rack is designed for use in data centres, server rooms, and IT infrastructures where controlled ventilation and structured cable management are required. The ventilated design supports cooling of installed devices and is therefore particularly suitable for environments with room climate control. The open floor construction allows for flexible installation and integration into existing floor structures.

Functions and Equipment in Detail

The rack features a multi-part, removable roof construction enabling cable entries at the rear and across. A covered opening in the roof plate is intended for mounting a fan plate. The 48,3 cm ( 19 inch )-profile rails are standardly positioned at the front and are screwed to the frame structure with mounting brackets at the top and bottom. The mounting spacing is 720 mm in the delivered state. The mounting clearances are 150 mm at the front and 449 mm at the rear to the 48,3 cm ( 19 inch ) plane. The rack's load capacity is 7,500 N, with a maximum static load capacity per rack according to UL 2416 of 6,000 N. The profile rails are depth-adjustable, allowing flexible adaptation to different device heights.

Technology Explained Simply

The ventilation of the doors (free area in the perforated section approximately 85%) ensures sufficient air circulation to guarantee heat dissipation from installed IT components. The 180° hinges allow full door opening, facilitating device installation and maintenance. The mounting brackets ensure secure attachment of the profile rails to the frame structure. The roof construction with removable parts and integrated opening for fan plate supports flexible cable routing and integration of fans for additional cooling.

Compatibility and Accessories

The rack is compatible with various accessories that extend its functionality. These include 48,3 cm ( 19 inch )-fasteners 1 U with contact, component shelves in various heights (0.5 U, 1 U, 1.5 U), drawers in 2 U and 3 U with insertion depth 427 mm, cable ducts (DK TS IT 6U), slide rails, blank panels, and cable routing brackets. The accessories are available in RAL 7035 and RAL 9005, enabling visual harmonization with the rack. The component shelves are pull-out and designed for mounting spacings of 400–600 mm. The drawers are designed for an insertion depth of 427 mm and can be mounted with slide rails. The blank panels are used to close unused mounting positions and are available in various sizes (1 U, 3 U).

Installation and Mounting

Mounting is performed via pre-assembled 48,3 cm ( 19 inch )-profile rails, which are secured to the frame structure with mounting brackets. The rack construction consists of a torsion-resistant, welded frame structure made of rolled, 9-fold flanged, closed hollow profiles with perforation in a 25 mm grid. Integrated blind rivet nuts M6 facilitate device mounting. The open floor construction allows flexible installation, with mounting clearances of 150 mm at the front and 449 mm at the rear, sufficient for secure device installation. The roof construction is removable, facilitating fan installation and cable entry.

Operational Advantages

The rack offers a high load capacity of 7,500 N and meets the static load capacity according to UL 2416 with 6,000 N per rack. The ventilated doors with 85% free area ensure efficient cooling of installed devices. The 180° hinges allow full door opening, facilitating maintenance and installation. The modular construction with removable roof and various accessories provides flexibility in adapting to specific requirements. The surface treatment (dip-primed, powder-coated, anodized/painted) ensures high corrosion resistance and visual quality. The colour design in RAL 7035 and RAL 9005 enables visual integration into existing infrastructures.

The rack is declared with a PCF value (Cradle-to-Gate) of 146.8 kg CO2 eq (Category B), calculated approximately based on product weight. The packaging unit is 1 piece, net weight 56.5 kg, gross weight 59.8 kg. The customs tariff number is 94032080. The delivery includes the rack frame with doors and roof plate, the 48,3 cm ( 19 inch )-profile rails, spacers for raising a deck plate above the fan opening, 12 pieces of 48,3 cm ( 19 inch )-fasteners 1 U (conductive), and 25 internal hexagon socket screws (conductive).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775796
qrcode für Rittal 5329111 server cabinet VX IT ventilated 42 HE