Rittal 5328190, EAN: 4028177945500

Rittal 5328190 VX 5328190 blank enclosure IP55 RAL7035

Rittal 5328190 VX 5328190 blank enclosure IP55 RAL7035

Lieske Part No. 1775797
Mfg Part No 5328190
EAN-Code 4028177945500
Manufacturer Rittal
Here only 816,04 EUR
971,09 EUR incl. VAT

Further information for Rittal 5328190 VX 5328190 blank enclosure IP55 RAL7035

General
MaterialSheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted
Basic colourRAL 7035
ColourHousing frame, rear door and roof: RAL 7035, front door: vertical profiles, silver, and horizontal profiles RAL 9005, handle and hinges: RAL 9005
Width600 mm
Height1.800 mm
Depth800 mm
Height units38 HE
Roof typeOne-piece, closed
Door configuration rearSteel sheet door, closed, single-piece, 130° hinges
Front door configurationAluminium front door, closed, single-piece, 180° hinges
Profile rail versionNone
Floor versionfloor tray with floor plate, multi-part, closed
Mounting type for profile railNone
Degree of protection IP according to EN 60 529IP 55 only in combination with gasket for rowing or screwed side walls
IK codeIK08
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)188.7 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5328190 is a network/server rack of the VX IT series, designed as a blank rack without pre-installed 48,3 cm ( 19 inch ) internal components. It is intended for the protected installation of IT and electronics components in environments requiring enhanced mechanical and environmental protection. The enclosure has dimensions W x H x D 600 × 1800 × 800 mm and includes 38 height units (U), making it suitable for use in server and network environments. The construction is based on a torsionally rigid, welded frame structure made from rolled, 9-fold bent closed hollow profiles with 25 mm pitch perforation, enabling flexible mounting of internal units.

Applications
This rack is designed for indoor use, particularly in IT infrastructures where direct rack-based climate control is required. The protection rating IP 55 is achieved only in combination with a baying seal or screwed side panels, making it suitable for environments with increased dust and splashing water hazards. The mechanical protection class IK08 protects against mechanical impacts such as shocks or vibrations, making it suitable for industrial or operational applications.

Functions and Equipment in Detail
The front of the rack features an aluminum viewing door made of single-pane safety glass (3 mm) with 180° hinges. The rear is covered by a closed steel sheet door with 130° hinges. Both doors are equipped with comfort handles for half cylinders, enabling secure and convenient operation. The front door is made of aluminum (1.25 mm) with an anodized/painted surface, where vertical profiles are silver-colored and horizontal profiles are in RAL 9005. The handles and hinges are also painted in RAL 9005. The enclosure frame, rear door, and roof are powder-coated in the base color RAL 7035, providing a robust and durable surface.

Technology Explained Simply
The rack frame is made of sheet steel and is dip-primed, while the rear door and roof are dip-primed and powder-coated. The floor construction includes a multi-part floor pan with floor sheet, ensuring stable mounting. The integrated blind rivet nuts M6 allow for protection-rated fastening of fittings to the profile. The horizontal profiles feature an integrated groove above the PU foam seal to protect it from mechanical damage. The square perforation all around allows the use of cage nuts and metric screws up to M8.

Compatibility and Accessories
The rack is supplied as a blank rack, allowing the internal configuration to be customized individually. Suitable accessories include, for example, insert modules such as PSM 6x C13 red, 3-phase 5-pole/16 A connection cable, cable ties, system lights, cable clamps for C-profile rails, socket strips, Velcro fasteners, component shelves for frame mounting, and PSM socket modules. These components can be used as required to extend functionality.

Mounting and Installation
Mounting is performed via the integrated frame structure with 25 mm pitch perforation. The floor pan is equipped with an integrated reinforcement frame, enabling direct screwing of the rack to the floor from the inside. The baying seal and seal set for floor sheets are included in the delivery, as are 12 x 48,3 cm ( 19 inch ) fasteners (1 U, conductive) and 25 internal hexagon socket screws (conductive).

Operational Advantages
The rack offers high mechanical stability and protection through the IP 55 protection rating (in combination with baying seal or screwed side panels) and IK08. The viewing door allows visual inspection of installed components without opening the door. The comfort handles and 180° hinges on the front door facilitate access and maintenance. The powder-coated surface ensures high corrosion resistance and optical quality. The construction is designed for direct rack-based climate control, supporting the integration of air conditioning units or fans.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775797
qrcode für Rittal 5328190 VX 5328190 blank enclosure IP55 RAL7035