| General |
| Material | Sheet steel, aluminium, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted |
| Basic colour | RAL 7035 |
| Colour | Housing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior fitting, front ventilation grille: RAL 9005, handle and hinges: RAL 9005 |
| Width | 800 mm |
| Height | 2.200 mm |
| Depth | 1.200 mm |
| Height units | 47 HE |
| Mounting clearance to 19" plane, front/back | 150 mm / 325 mm |
| Mounting position 19" rack | Front and rear |
| Layer spacing (as delivered) | 725 mm |
| 19" mounting | Screwed to top and bottom depth brace |
| Model | Dynamic |
| Roof type | Multi-part, with lateral cable entry in depth, on both sides, prepared for fan panel |
| Door configuration rear | Steel sheet door, ventilated, vertically divided, 180° hinges |
| Front door configuration | Aluminium-steel sheet door, ventilated, single-piece, 180° hinges |
| Profile rail version | 19"-profile rails dynamic in VX IT |
| Floor version | Open |
| 19" rack configuration | 19"-level front and rear |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 18.000 N |
| Max. load capacity (static) according to UL 2416 per cabinet | 15.000 N |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 290,7 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5316816 is a
network/server rack of the VX IT series in the
dynamic configuration, designed for use in IT infrastructures with room climate control. The enclosure has dimensions of 800 mm width, 2,200 mm height, and 1,200 mm depth, offering an installation height of 47
height units (HE). It is designed for mounting 48,3 cm ( 19 inch ) devices, with the
48,3 cm ( 19 inch ) mounting plane integrated both front and rear. The
48,3 cm ( 19 inch ) profile rails in the dynamic configuration are depth-adjustable and secured to the depth rails at the top and bottom. The spacing between mounting levels is 725 mm in the delivered state, with a mounting clearance of 150 mm in front and 325 mm at the rear relative to the 48,3 cm ( 19 inch ) mounting plane.
Applications
This rack is suitable for use in data centers, server rooms, and IT infrastructures where a ventilated construction is required for heat dissipation and integration into room climate control systems. The
ventilated front door made of aluminum-steel sheet and the
ventilated rear door made of steel sheet, each with 180° hinges, ensure efficient air circulation. The front door is single-piece, while the rear door is vertically divided, enabling better accessibility and maintenance. The ventilation area covers approximately 85% of the perforated sheet metal portion, ensuring sufficient cooling for installed devices.
Functions and Equipment in Detail
The rack frame is made of steel sheet, dip-primed, while the interior assembly is painted. The rear door and roof are dip-primed and powder-coated, and the aluminum front door is anodized/painted. The base color of the enclosure is RAL 7035, with the front door featuring vertical silver-colored profiles and horizontal RAL 9005. The interior assembly, front ventilation grille, handle, and hinges are in RAL 9005. The
load capacity of the rack is 18,000 N, with a maximum static load capacity per rack according to UL 2416 of 15,000 N. The roof is multi-part and equipped with side cable entries at the depth, on both sides, and is prepared for mounting a fan plate.
Technology Explained Simply
The
dynamic profile rails allow flexible adjustment of mounting depth to suit individual devices. The mounting is secured to the depth rails at the top and bottom, ensuring stable installation. The
48,3 cm ( 19 inch ) fasteners (12 pieces, 1 HE, conductive) and
internal hex socket screws (25 pieces, conductive) are included in the delivery and serve for secure device mounting. Additionally, spacers with a height of 50 mm are provided to lift a cover plate above the fan opening in the roof plate, enabling passive ventilation. These are not required if no openings are present in the roof.
Compatibility and Accessories
The rack is compatible with a wide range of accessories for system expansion and customization. These include, for example,
VX plinth corner pieces,
routing panels in various heights,
glide rails,
connection cables for PSM systems,
component shelves,
cable ties,
system lights,
cable clamps,
hook-and-loop fasteners, and
busbars. These components enable individual adaptation to specific requirements such as cable management, lighting, power supply, or additional mounting surfaces.
Mounting and Installation
Mounting is done to the depth rails at the top and bottom, with the profile rails adjustable in depth. The rack base is open, allowing flexible installation on various subfloors. The door opening angles may vary depending on the type and location of installation, with hinges allowing a 180° opening. The front and rear locks consist of comfort handles for half-cylinders and a security locking mechanism (type 3524 E), ensuring secure access control.
Operational Advantages
The rack offers high mechanical stability through its welded, torsion-resistant frame structure made of 9-fold bent, closed hollow profiles. The integrated blind rivet nuts M6 allow secure mounting of fittings without compromising the protection rating. The ventilated construction supports cooling of installed IT devices and is thus ideal for environments with room climate control. The dynamic configuration allows flexible adaptation to different device heights and depths, increasing mounting efficiency. The surface treatment ensures high corrosion resistance and visual quality. The PCF values (Cradle-to-Gate) are 290.7 kg CO2 eq (Category B), calculated approximately based on product weight and self-declared.
The delivery includes the rack frame with doors and roof plate, ventilated front and rear doors, dynamic 48,3 cm ( 19 inch ) profile rails, spacers, 12x 48,3 cm ( 19 inch ) fasteners 1 HE (conductive), and 25 internal hex socket screws (conductive). The packaging unit is 1 piece, net weight 105 kg, gross weight 118 kg. The tariff code is 94032080. The rack construction is UL + C-UL (listed) certified.