General
Technical data	Max. load capacity 250 kg per compartment
Material	Cabinet frame: steel sheet, 1.5 mm, roof sheet: steel sheet, 1.5 mm, floor sheet: steel sheet, 1.0 mm, front and rear doors: steel sheet, 1.5 mm, profile rails: steel sheet, 2.5 mm
Basic colour	RAL 7035
Colour	Cabinet frame and flat parts: RAL 7035, 19" mounting surface, hinges and handles painted in RAL 9005
Width	800 mm
Height	2.200 mm
Depth	1.200 mm
Layer spacing (as delivered)	740 mm
Number of front doors	4
Number of rear doors	4
19" mounting	4 x 11 U, including 482.6 mm (19") mounting plane, front and rear per compartment, individually, independently adjustable
Built-in PDU within the 19” mounting plane	19"-PDU with IEC C20 connector, part no. 7979.102/.202/.302/.402/.502, 19"-PDU – CEE plug/16 A, 1~, part no. 7979.103/.203/.303/.403/.503
Model	Compartment rack, 4 x 11 U
Roof type	Roof sheet, single-piece, with double-sided cable routing in the middle part of the roof
Door configuration	Maximum door opening angle 130°, including 2-point rod lock
Door configuration rear	4-way split, ventilated
Front door configuration	4-way split, ventilated
Profile rail version	19" profile rails in VX IT Compartment Rack
Floor version	Floor frame with pre-mounted, extendable, two-part, closed floor plate
19" rack configuration	19"-plane front and rear, 19" mounting plane with universal mounting brackets, front and rear, adjustable depth, 12.5 mm pitch, screwed to left and right partition walls, with integrated airflow guides, airflow guide with integrated vertical 1 HE 19" mounting cutout on right and left per compartment, additional space for internal build or cable routing.
Mounting type for profile rail	19"-level front and rear
Note	Depending on type and location of installation, the door opening angle may vary in the specific application
Base material	steel sheet

The Rittal VX 5316185 is a Compartment Rack of the VX IT series, designed for modular and physically separated installation of IT and electrical components within a common enclosure. This structure enables the integration of various applications, user groups, or access authorizations within a central cabinet, with cabling for each compartment routed independently. The ventilated doors at the front and rear ensure efficient air circulation, supporting cooling of installed devices.

Applications

The VX IT Compartment Rack is suitable for use in data centres, server rooms, IT infrastructures, and industrial environments where clear separation of installations and high access security are required. The modular design allows for flexible use, such as separating network and security components, or assigning individual compartments to different departments. The pre-assembled configuration with integrated partition panels and mounting levels significantly reduces installation time.

Functions and Equipment in Detail

Each of the four compartments features a 48,3 cm ( 19 inch ) mounting level at the front and rear, each comprising 11 U (unit heights). The mounting levels are depth-adjustable and can be set independently, with a pitch of 12.5 mm. Mounting is performed using universal mounting brackets, which are screwed to the integrated partition panels on the left and right. The 48,3 cm ( 19 inch ) profile rails made of sheet steel (2.5 mm) are positioned in the front and rear planes and allow for device mounting according to the 48,3 cm ( 19 inch ) standard. The maximum load capacity is 250 kg per compartment, ensuring robust use even under heavy loads.

Technology Explained Simply

The enclosure is made of sheet steel with a wall thickness of 1.5 mm for the cabinet frame, front and rear doors, and roof plate. The floor plate has a thickness of 1.0 mm and is pre-assembled as a two-part, pull-out element. The doors are divided into four sections and are ventilated, with a maximum door opening angle of 130°. In baying, the angle can be reduced to a maximum of 115°. The doors are equipped with a 2-point rod lock, ensuring secure locking. The handles and hinges are painted in RAL 9005, while the enclosure frame and flat parts are in RAL 7035. Cable routing is facilitated through the single-piece roof plate, which offers cable routing options on both sides in the central section.

Compatibility and Accessories

The VX IT Compartment Rack is designed for integration with 48,3 cm ( 19 inch ) PDUs (Power Distribution Units), with installation options for PDU models featuring IEC C20 connectors or CEE plugs (16 A, 1~) specified. Compatible accessories include, among others, component shelves, slide rails, cable routing trough panel, IT system lights, VX side panels, and PDU models in various configurations. Baying is possible on all sides, with door hinges switchable from right to left. The integrated air baffle plates in the 48,3 cm ( 19 inch ) mounting frame support airflow and prevent uncontrolled air currents within the cabinet.

Mounting and Installation

The cabinet is pre-assembled and delivered with a level spacing of 740 mm, which can be individually adjusted. Mounting is carried out using the pre-installed profile rails and mounting brackets. The pre-installed partition panels and pull-out floor plate simplify installation. The equipotential bonding connection is already integrated, preparing for the attachment of earthing straps. The pre-installed 482.6 mm (48,3 cm ( 19 inch )) mounting levels at the front and rear per compartment enable quick and precise installation of devices.

t
Operational Advantages

The modular and separated structure of the VX IT Compartment Rack offers high flexibility in planning and use. The physical separation of compartments ensures clear assignment of devices and cabling, simplifying maintenance and fault diagnosis. The ventilated doors and integrated air baffle plates support efficient cooling, while the robust sheet steel construction ensures high mechanical stability. The pre-assembled configuration reduces mounting time and enables quick commissioning. The maximum load capacity of 250 kg per compartment makes the enclosure suitable for demanding applications. The integrated mounting elements and the possibility of individual adjustment of mounting levels increase adaptability to different device configurations.