Rittal 5313813, EAN: 4028177945302

Rittal 5313813 server cabinet VX IT ventilated 47HE

Rittal 5313813 server cabinet VX IT ventilated 47HE

Lieske Part No. 1775812
Mfg Part No 5313813
EAN-Code 4028177945302
Manufacturer Rittal
Here only 1.639,79 EUR
1.951,35 EUR incl. VAT

Further information for Rittal 5313813 server cabinet VX IT ventilated 47HE

General
MaterialSheet steel, aluminium, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted
Basic colourRAL 7035
ColourHousing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior fitting, front ventilation grille: RAL 9005, handle and hinges: RAL 9005
Width600 mm
Height2.200 mm
Depth1.000 mm
Height units47 HE
Mounting clearance to 19" plane, front/back87 mm / 213 mm
Mounting position 19" rackFront and rear
Layer spacing (as delivered)700 mm
19" mountingwith mounting bracket screwed to top and bottom of frame structure
ModelDynamic
Roof typemulti-part, with cable entry in corner areas front and rear
Door configuration rearSteel sheet door, ventilated, vertically divided, 180° hinges
Front door configurationAluminium-steel sheet door, ventilated, single-piece, 180° hinges
Profile rail version19"-profile rails dynamic in VX IT
Floor versionOpen
19" rack configuration19"-level front and rear
Mounting type for profile rail19"-level front and rear
Load capacity18.000 N
Max. load capacity (static) according to UL 2416 per cabinet15.000 N
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)219.3 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5313813 is a network/server rack of the VX IT series in the dynamic version, designed for use in IT infrastructures with room climate control. It has a total height of 2,200 mm, a width of 600 mm, and a depth of 1,000 mm, with an expansion width of 47 height units (HE). The rack construction consists of sheet steel and aluminium, with the front door made of aluminium with a thickness of 1.25 mm and the rear door made of sheet steel with 1.5 mm thickness. The surface of the rack frame is dip-primed, the interior assembly is painted, while the rear door and roof are powder-coated. The front door is anodized/painted, ensuring a robust and visually appealing surface.

Applications

The rack is designed for use in server and network environments, particularly in rooms with controlled climate conditioning. The ventilated doors enable efficient air circulation, supporting cooling of installed devices. The dynamic version offers flexibility in mounting and adaptation to different requirements. The multi-part roof construction with cable entries in the front and rear corner areas facilitates cabling and integration into existing infrastructures.

Functions and Equipment in Detail

The front door is designed as an aluminium-sheet steel door, ventilated and single-piece with 180° hinges, ensuring full access to the interior. The rear door is a sheet steel door, also ventilated but vertically divided, with 180° hinges. The ventilation areas amount to approximately 85% of the perforated sheet metal portion, enabling sufficient airflow for device cooling. The doors are equipped with a comfort handle for half-cylinder locks and a security locking system 3524 E, ensuring secure access. The 48,3 cm ( 19 inch ) profile rails are integrated in the dynamic version and allow depth-variable mounting. Mounting is done via mounting brackets screwed to the top and bottom of the frame structure.

Technology Explained Simply

The rack is constructed with a torsion-resistant, welded frame structure made of 9-fold bent, closed hollow profiles, providing high stability. The perforation follows a 25 mm grid, enabling flexible device mounting. Integrated blind rivet nuts M6 allow attachment of fittings without affecting the protection rating. The spacing between levels is 700 mm in the delivered state, with a mounting clearance to the 48,3 cm ( 19 inch ) level of 87 mm in front and 213 mm at the rear. The 48,3 cm ( 19 inch ) level can be installed both in front and at the rear, enabling flexible use. The rack’s load capacity is 18,000 N, with a maximum static load capacity according to UL 2416 per rack of 15,000 N.

Compatibility and Accessories

The rack is compatible with various accessories that extend its functionality. These include, for example, cable management panels, slide rails, 48,3 cm ( 19 inch ) fasteners, connection cables, component shelves, cable ties, system lights, cable clamps, hex socket screws, cage nuts, and hook-and-loop fasteners. These components allow individual adaptation to specific requirements, such as cabling, device mounting, or cable securing. The accessories are available in various versions and colours (e.g. RAL 9005) to ensure a uniform appearance.

Mounting and Installation

Mounting is done via mounting brackets screwed to the top and bottom of the frame structure. The 48,3 cm ( 19 inch ) profile rails are depth-variable and can be adjusted according to requirements. The spacers with a height of 50 mm allow raising a roof plate above the fan outlet in the roof plate, supporting passive ventilation. Installation requires no special tools, as mounting is done via standard screws. The floor construction is open, allowing flexible placement.

Advantages in Operation

The rack offers high load capacity and a stable construction suitable for use in professional IT environments. The ventilated doors and flexible mounting of the 48,3 cm ( 19 inch ) profile rails enable efficient cooling and easy device installation. The integrated blind rivet nuts simplify attachment of accessories without affecting the protection rating. The multi-part roof construction with cable entries facilitates cabling and integration into existing infrastructures. The colour design with RAL 7035 and RAL 9005 ensures a uniform appearance that fits well in professional environments.

The rack features a PCF value (Cradle-to-Gate) of 219.3 kg CO2 eq (Category B), reflecting the product’s environmental footprint. The manufacturer’s data is based on an approximate calculation using product weight and is self-declared.

The delivery includes the rack frame with doors and roof plate, the 48,3 cm ( 19 inch ) profile rails, spacers, 12 x 48,3 cm ( 19 inch ) fasteners 1 HE, 25 hex socket screws, and an IPPC pallet. The accessories are supplied loose and can be mounted according to requirements. Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775812
qrcode für Rittal 5313813 server cabinet VX IT ventilated 47HE