Rittal 5313175, EAN: 4028177950054

Rittal 5313175 VX IT Compartment Rack ventilated 2 doors 2x23 HE

Rittal 5313175 VX IT Compartment Rack ventilated 2 doors 2x23 HE

Lieske Part No. 1246500
Mfg Part No 5313175
EAN-Code 4028177950054
Manufacturer Rittal
Here only 2.608,20 EUR
3.103,76 EUR incl. VAT

Further information for Rittal 5313175 VX IT Compartment Rack ventilated 2 doors 2x23 HE

General
Technical datamaximum load capacity 500 kg per compartment
MaterialCabinet frame: steel sheet, 1.5 mm, roof sheet: steel sheet, 1.5 mm, floor sheet: steel sheet, 1.0 mm, front and rear doors: steel sheet, 1.5 mm, profile rails: steel sheet, 2.5 mm
Basic colourRAL 7035
ColourCabinet frame and flat parts: RAL 7035, 19" mounting surface, hinges and handles painted in RAL 9005
Width600 mm
Height2.200 mm
Depth1.000 mm
Layer spacing (as delivered)740 mm
Number of front doors2
Number of rear doors2
19" mounting2 x 23 U, including 482.6 mm (19") mounting plane, front and rear per compartment, individually, independently adjustable
Built-in PDU vertical in rear spaceVertical PDU with IEC C20 connection (max. PDU length 1.000 mm), Order no. 7979.117/.118/.217/.317/.417
Built-in PDU within the 19” mounting plane19"-PDU with IEC C20 connector, order no. 7979.102/.202/.302/.402/.502
ModelCompartment Rack, 2 x 23 U
Roof typeRoof sheet, single-piece, with double-sided cable routing in the middle part of the roof
Door configurationMaximum door opening angle 130°, including 2-point rod lock
Door configuration rear2-way split, ventilated
Front door configuration2-way split, ventilated
Profile rail version19" profile rails in VX IT Compartment Rack
Floor versionFloor frame with pre-mounted, extendable, two-part, closed floor plate
19" rack configuration2 x 23 HE
Mounting type for profile rail19"-level front and rear
Load capacity1.000 kg
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
The Rittal VX 5313175 is a Compartment Rack of the VX IT series, designed for the physically separated housing of IT infrastructures within a common enclosure. It is suitable for applications where different user groups or applications with separate access rights and cabling are to be integrated. The enclosure is divided into two Installations-Compartments, each featuring a 48,3 cm ( 19 inch ) mounting plane at the front and rear, enabling individual and independent setup of each area. The ventilation of the doors ensures efficient cooling of installed devices, with each door being 2-part and ventilated.

Applications
This rack is suitable for use in data centers, server rooms, or technical facilities where clear separation of IT systems is required. The separate compartments allow for independent cabling and access control, which is particularly advantageous in security-critical environments or when different systems coexist. The pre-assembled version with integrated air baffle plates in the 48,3 cm ( 19 inch ) mounting frame supports organized airflow and improves cooling performance.

Functions and Equipment in Detail
The enclosure features 48,3 cm ( 19 inch ) mounting with 2 x 23 HE per compartment, where the mounting planes at the front and rear are individually and independently adjustable. The plane spacing is 740 mm in the delivered state, but can be adjusted as needed. The doors open to an angle of 130°, with a maximum of 115° achievable in baying. The door hinges are reversible from right to left, enabling flexible arrangement. The front and rear doors are made of steel sheet with a thickness of 1.5 mm and are equipped with a 2-point rod lock, ensuring secure access control.

Technology Explained Simply
The enclosure is made of steel sheet, with the cabinet frame, roof plate, and doors each being 1.5 mm thick. The floor plate has a thickness of 1.0 mm, and the profile rails are made of 2.5 mm thick steel sheet. The enclosure frames and flat parts are finished in RAL 7035, while the 48,3 cm ( 19 inch ) mounting planes, hinges, and handles are painted in RAL 9005. The maximum load capacity is 1,000 kg in total, with 500 kg allowed per compartment. The floor plate is pre-mounted, two-part, and pull-out, enabling easy installation and maintenance. The roof construction is single-piece with bilateral cable routing in the center section, allowing flexible cabling from above.

Compatibility and Accessories
The rack is designed for installation of PDU systems. Vertical PDUs with IEC C20 connectors (maximum length 1,000 mm) can be installed in the rear space, with order numbers 7979.117/.118/.217/.317/.417 mentioned. Alternatively, 48,3 cm ( 19 inch ) PDUs with IEC C20 connectors can be mounted within the mounting plane, with order numbers 7979.102/.202/.302/.402/.502 available. Additionally, various accessories are available, such as routing panels, slide rails, drawers, document clamps, and IT system lights, which extend the functionality of the rack.

Mounting and Installation
The rack is pre-assembled and can be installed all-around in baying. The integrated air baffle plates in the 48,3 cm ( 19 inch ) mounting frame support organized airflow. The mounting planes are depth-variable, with the front profiles featuring an integrated air baffle. The pre-assembled version with pull-out floor plate and integrated partition panels simplifies installation. The door hinges are reversible, enabling flexible arrangement in rows or corners.

Advantages in Operation
The physical separation of compartments provides high security and access control. The individually adjustable mounting planes and flexible plane spacing enable adaptable use. The ventilated doors and integrated air baffle plates ensure efficient cooling of devices. The pre-assembled version reduces installation time and increases installation accuracy. Compatibility with various PDU systems and accessories extends the rack's application possibilities.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1246500
qrcode für Rittal 5313175 VX IT Compartment Rack ventilated 2 doors 2x23 HE