| General |
| Material | Sheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted |
| Basic colour | RAL 7035 |
| Colour | Casing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior: RAL 9005, handle and hinges: RAL 9005 |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 1.200 mm |
| Height units | 42 HE |
| Mounting clearance to 19" plane, front/back | 150 mm / 325 mm |
| Mounting position 19" rack | Front and rear |
| Layer spacing (as delivered) | 725 mm |
| 19" mounting | Screwed to top and bottom depth brace |
| Model | Dynamic |
| Roof type | Multi-part, with lateral cable entry in depth, on both sides, prepared for fan panel |
| Door configuration rear | Steel sheet door, closed, vertically divided, 180° hinges |
| Front door configuration | Aluminium front door, closed, single-piece, 180° hinges |
| Profile rail version | 19"-profile rails dynamic in VX IT |
| Floor version | Open |
| 19" rack configuration | 19"-level front and rear |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 18.000 N |
| Max. load capacity (static) according to UL 2416 per cabinet | 15.000 N |
| IK code | IK08 |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 303.3 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX IT network/server rack, type VX 5311826, is a closed IT rack in the
dynamic configuration, designed for the installation of network and server equipment in professional environments. The enclosure has dimensions of 800 mm width, 2,000 mm height, and 1,200 mm depth, offering a mounting height of 42 HE. The front door is made of aluminium with a
single-pane safety glass viewing door (3 mm thickness), designed as a single unit with 180° hinges. The rear is closed by a
steel sheet door, vertically divided and also equipped with 180° hinges. Both doors are fitted with a comfort handle for half cylinder and a security locking system 3524 E.
Applications
This rack is designed for use in data centres, server rooms, and IT infrastructures where direct rack-based climate control is required. The closed design supports thermal efficiency and protects installed equipment from dust and unwanted ingress. The
dynamic configuration allows flexible mounting of equipment on the 48,3 cm ( 19 inch ) plane at the front and rear, with a mounting clearance of 150 mm at the front and 325 mm at the rear. The 48,3 cm ( 19 inch ) profile rails are screwed to the depth brace at the top and bottom, providing a spacing of 725 mm in the delivered state.
Functions and Equipment in Detail
The rack frame is made of steel sheet and is dip-primed, with the interior build painted. The rear door and roof are dip-primed and powder-coated, while the aluminium front door is anodized/painted. The colour scheme corresponds to RAL 7035 for the enclosure frame, rear door, and roof, while the front door features vertical silver profiles and horizontal RAL 9005. The interior build, handle, and hinges are in RAL 9005. The roof is multi-part and features side cable entries at both sides of the depth, prepared for mounting a fan plate. The base is open.
Technology Explained Simply
The
48,3 cm ( 19 inch ) profile rails dynamic allow flexible mounting of IT equipment and are designed for a static load capacity of 18,000 N. The maximum static load capacity per rack according to UL 2416 is 15,000 N. The rack construction meets the IK code
IK08, indicating high mechanical resistance against impacts or vibrations. Mounting is done on depth braces, with the profile rails screwed at both ends. Integrated blind rivet nuts M6 allow the attachment of fittings without compromising the protection rating.
Compatibility and Accessories
The rack is compatible with various accessories that extend its functionality. These include, for example,
TS IT sliding rails,
routing panels,
cable managers,
component shelves in various heights, and
socket strips. The 48,3 cm ( 19 inch ) fasteners (1 HE, conductive) and conductive internal hex socket screws are included in the delivery scope.
Mounting and Installation
Mounting is performed on the 48,3 cm ( 19 inch ) plane at the front and rear, with the profile rails screwed to the depth brace at the top and bottom. The spacing is set to 725 mm in the delivered state. The doors open 180°, although the actual opening angle may vary depending on installation location and environment. The open base construction allows flexible integration into existing floor structures.
Operational Advantages
The closed design with viewing door and steel sheet door provides a high degree of protection against dust and mechanical impacts. The
dynamic configuration of the profile rails enables flexible and secure equipment mounting. The integrated cable entry in the roof and designated mounting points for fan plates support efficient climate control. The load capacity of 18,000 N and IK08 rating ensure robust and long-lasting use in demanding environments. The colour scheme in RAL 7035 and RAL 9005 provides a professional appearance that integrates well into modern IT infrastructures.