| General |
| Material | Sheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted |
| Basic colour | RAL 7035 |
| Colour | Casing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior: RAL 9005, handle and hinges: RAL 9005 |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 1.200 mm |
| Height units | 42 HE |
| Mounting clearance to 19" plane, front/back | 150 mm / 330 mm |
| Mounting position 19" rack | Front and rear |
| Layer spacing (as delivered) | 720 mm |
| 19" mounting | screwed to depth rails top and bottom, and to mounting rail on frame structure |
| Model | Standard |
| Roof type | Multi-part, with lateral cable entry in depth, on both sides, prepared for fan panel |
| Door configuration rear | Steel sheet door, closed, vertically divided, 180° hinges |
| Front door configuration | Aluminium front door, closed, single-piece, 180° hinges |
| Profile rail version | 19" profile rails standard in VX IT |
| Floor version | Open |
| 19" rack configuration | Front and rear |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 15.000 N |
| Max. load capacity (static) according to UL 2416 per cabinet | 12.000 N |
| IK code | IK08 |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 285.8 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5311126 is a
network/server rack of the VX IT series, designed for use in IT and server environments. It features a
standard configuration with an overall height of 2,000 mm, a width of 800 mm, and a depth of 1,200 mm. The rack height corresponds to 42
height units (HE), with a panel spacing of 720 mm in the delivered state. The rack construction allows for
48,3 cm ( 19 inch ) mounting both front and rear, with profile rails screwed to depth rails at top and bottom, as well as to the support rail on the frame structure. The
mounting clearances are 150 mm front and 330 mm rear, ensuring sufficient space for device and cable installation.
Applications
The rack is designed for use in data centers, server rooms, and IT infrastructures where structured and secure housing of network and server equipment is required. The
closed design with a viewing door front and steel sheet door rear provides a high level of protection against mechanical impacts and unauthorized access. The
IK08 rating ensures high mechanical strength, suitable for use in industrial or public facilities. The
load capacity of 15,000 N and static maximum load of 12,000 N according to UL 2416 make the rack suitable for use with heavy equipment.
Functions and equipment in detail
The
front door is made of aluminum with a
viewing door of single-pane safety glass (3 mm), allowing clear visibility of installed devices. The door is single-piece and fitted with
180° hinges, enabling full opening. The
rear door is made of
steel sheet (1.5 mm), closed and vertically divided, also with
180° hinges. The
surface of the rack frame is dip-primed, the interior finish is painted, while the rear door and roof are powder-coated. The front door is anodized/painted, providing a robust and aesthetically pleasing surface. The color scheme is
RAL 7035 for the enclosure frame, rear door, and roof, while the front door is vertically silver and horizontally
RAL 9005. Interior finish, handle, and hinges are also painted in
RAL 9005.
Technology explained simply
The rack is made of
steel sheet, supplemented with aluminum and glass components. The
48,3 cm ( 19 inch ) profile rails are standard in the VX IT and allow mounting of IT equipment according to the 48,3 cm ( 19 inch ) standard. The
multi-part roof construction is equipped with side cable entries at depth, on both sides, and is prepared for mounting a fan plate, facilitating integration of climate control systems. The
open floor construction allows flexible installation of floor plates or cable ducts. The
48,3 cm ( 19 inch ) panel is positioned both front and rear, enabling symmetrical device mounting.
Compatibility and accessories
Various
accessories are available for this rack, extending its functionality. These include
slide rails,
component shelves in various heights,
cable managers,
routing panels,
drawers,
cable ducts, and
socket strips. These components allow individual adaptation to specific requirements, such as cable management, device mounting, or power supply. The
48,3 cm ( 19 inch ) fasteners and
conductive internal hex socket screws are included in the delivery scope and serve for secure device mounting.
Mounting and installation
The rack is pre-assembled and can be installed directly. The
48,3 cm ( 19 inch ) profile rails are already installed, with mounting to depth rails and support rail. The
spacers (50 mm) are included and serve to raise a roof plate above the fan opening in the roof plate, enabling passive ventilation. The
cable entry in the roof is on both sides and at depth, supporting flexible cable routing. The
180° hinges on front and rear doors allow full opening, facilitating device mounting and maintenance.
Advantages in operation
The rack offers high mechanical stability, clear visibility of devices through the viewing door, and flexible mounting options via the 48,3 cm ( 19 inch ) panel front and rear. The
IK08 rating protects against mechanical impacts, while the
dip-primed and powder-coated surface ensures high corrosion resistance. The
prepared roof construction for fan plates supports integration of climate control systems, which is important for heat dissipation in server environments. The
open floor construction allows flexible adaptation to different floor conditions and cable routing.