| General |
| Material | Sheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted |
| Basic colour | RAL 7035 |
| Colour | Casing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior: RAL 9005, handle and hinges: RAL 9005 |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 1.000 mm |
| Height units | 42 HE |
| Mounting clearance to 19" plane, front/back | 87 mm / 213 mm |
| Mounting position 19" rack | Front and rear |
| Layer spacing (as delivered) | 700 mm |
| 19" mounting | Screwed to top and bottom depth brace |
| Model | Dynamic |
| Roof type | Multi-part, with lateral cable entry in depth, on both sides, prepared for fan panel |
| Door configuration rear | Steel sheet door, closed, vertically divided, 180° hinges |
| Front door configuration | Aluminium front door, closed, single-piece, 180° hinges |
| Profile rail version | 19"-profile rails dynamic in VX IT |
| Floor version | Open |
| 19" rack configuration | 19"-level front and rear |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 18.000 N |
| Max. load capacity (static) according to UL 2416 per cabinet | 15.000 N |
| IK code | IK08 |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 300.6 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX IT network/server rack, type 5309826, is a closed IT rack in dynamic configuration, designed for use in server and network environments. It features a total height of 2,000 mm, a width of 800 mm, and a depth of 1,000 mm, with an internal mounting height of 42 HE. The construction allows for mounting of 48,3 cm ( 19 inch ) devices on both the front and rear 48,3 cm ( 19 inch ) planes, with front mounting clearance of 87 mm and rear clearance of 213 mm. The profile rails are integrated in the dynamic configuration and secured to the depth rails at top and bottom via screws. The plane spacing in the delivered state is 700 mm.
Applications
This enclosure is designed for use in data centres, IT infrastructures, and technical rooms where direct rack-based climate control is required. The closed design with a viewing door at the front and a steel sheet door at the rear ensures protected operation of installed devices. The dynamic configuration allows flexible adaptation to different mounting requirements and provides a stable base for installing network and server systems.
Functions and Equipment in Detail
The front door is made of aluminium with a single-piece viewing door of toughened safety glass (3 mm thickness), allowing clear visibility of installed devices. The door is fitted with 180° hinges and can be fully opened. The rear door is made of steel sheet (1.5 mm), closed and vertically divided, also with 180° hinges. The enclosure frame surface is dip-primed, the internal mounting area is painted, while the rear door and roof are powder-coated. The front door is made of aluminium, anodized/painted, with vertical profiles in silver and horizontal profiles in RAL 9005. The internal mounting, handle, and hinge colour corresponds to RAL 9005. The base colour of the enclosure, rear door, and roof is RAL 7035.
Technology Explained Simply
The enclosure is made of steel sheet and aluminium, providing high mechanical stability. The load capacity is 18,000 N, with a maximum static load capacity per enclosure according to UL 2416 of 15,000 N. The IK rating of IK08 indicates high resistance to mechanical impacts. The roof is multi-part and equipped with side cable entries at the depth, on both sides, and is prepared for mounting a fan plate. The floor is open, enabling flexible installation.
Compatibility and Accessories
The enclosure is equipped with 48,3 cm ( 19 inch ) profile rails in dynamic configuration, secured to the depth rails. Compatible accessories include, among others, VX plinth corner pieces, routing panels, slide rails, 48,3 cm ( 19 inch ) fasteners, component shelves, cable managers, socket strips, drawers, and cable routing trough panels. These components allow individual adaptation of the enclosure to specific installation requirements.
Mounting and Installation
Mounting is carried out by screwing to the depth rails at top and bottom. The 48,3 cm ( 19 inch ) plane is positioned both at the front and rear, enabling flexible device placement. The delivery includes spacers for raising a roof plate above the fan opening in the roof plate to enable passive ventilation. Additionally, 12 x 48,3 cm ( 19 inch ) fasteners 1 HE, conductive, and 25 internal hexagon socket screws, conductive, are included. The locking mechanism at front and rear consists of a comfort handle for half cylinder and a security lock 3524 E.
Operational Advantages
The enclosure offers high mechanical stability and is suitable for demanding environments. The closed design protects installed devices from dust and mechanical impacts. The viewing door allows visual inspection of devices, while the 180° hinges provide full access. The integrated 48,3 cm ( 19 inch ) profile rails in dynamic configuration ensure secure and flexible device mounting. The preparation for fan plate in the roof supports efficient climate control of the enclosure.
The PCF values (Cradle-to-Gate) are 300.6 kg CO2 eq per packaging unit, with class B indicating that the value is approximately calculated based on product weight and self-declared. The packaging unit is 1 piece, net weight 106.01 kg, gross weight 122 kg. The tariff code is 94032080. Approvals include UL + C-UL (listed), and there is a manufacturer's declaration, a conformity declaration, and a UK conformity declaration available.