| General |
| Material | steel sheet, aluminium, plastic, front door: aluminium, 1.25 mm, rear door: steel sheet, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted |
| Basic colour | RAL 7035 |
| Colour | Cabinet frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior construction, ventilation grille front, base: RAL 9005, handles and hinges: RAL 9005 |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 1.000 mm |
| Height units | 42 HE |
| Height including socket | 2.100 mm |
| Mounting clearance to 19" plane, front/back | 87 mm / 193 mm |
| Layer spacing (as delivered) | 720 mm |
| Model | pre-assembled |
| Roof type | Multi-part, with lateral cable entry in depth, on both sides, prepared for fan panel |
| Door configuration rear | Steel sheet door, ventilated, vertically divided, 180° hinges |
| Front door configuration | Aluminium-steel sheet door, ventilated, single-piece, 180° hinges |
| Profile rail version | 19" profile rails standard in VX IT |
| Floor version | Floor module front mounted as sight shield |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 15.000 N |
| Max. load capacity (static) according to UL 2416 per cabinet | 12.000 N |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 381.9 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5309166 is a pre-assembled
network/server rack of the VX IT series, designed for use in IT infrastructures with room climate control. It features a total height of 2,000 mm (including plinth 2,100 mm), a width of 800 mm, and a depth of 1,000 mm, with the rack height comprising 42
height units (HE). The pre-assembled configuration enables quick commissioning, as the mounting of profile rails, doors, and the roof is completed at the factory. The rack is designed for use in server and network environments where a ventilated construction is required for heat dissipation and to ensure stable operating temperature.
Applications
This rack is suitable for use in data centers, server rooms, IT infrastructures, and other environments requiring controlled ventilation and stable mounting of IT equipment. The ventilated doors with approximately 85% open area in the perforated sheet metal section ensure efficient air circulation, supporting cooling of installed devices. The pre-assembled configuration reduces on-site installation effort and enables quick integration into existing systems.
Functions and Equipment in Detail
The rack features an
aluminum-steel sheet door at the front, which is single-piece and ventilated, and a
steel sheet door at the rear, which is vertically divided and also ventilated. Both doors are fitted with 180° hinges, allowing full opening angle. The front door is made of aluminum with a thickness of 1.25 mm and is anodized/painted, while the rear door is made of steel sheet with a thickness of 1.5 mm and is powder-coated. The rack frame surface is dip-primed, the interior assembly is painted, and the roof and rear door are dip-primed and powder-coated. The base color of the enclosure is RAL 7035, with the front door featuring vertical silver-colored profiles and horizontal RAL 9005. The interior assembly, front ventilation grille, plinth, handle, and hinges are in RAL 9005.
Technology Explained Simply
The
48,3 cm ( 19 inch ) profile rails are standardly mounted at the front and rear and are variably screwed to the depth rails at top and bottom, enabling flexible device mounting. The spacing between mounting levels is 720 mm in the delivered state, with the mounting clearance to the 48,3 cm ( 19 inch ) level being 87 mm at the front and 193 mm at the rear. The roof is multi-part and features side cable entries on both sides at the depth, and is prepared for mounting a fan plate. The base module is mounted at the front as a viewing panel, and the VX plinth system with a height of 100 mm is ventilated. The rack's load capacity is 15,000 N, with the maximum static load capacity according to UL 2416 per rack being 12,000 N.
Compatibility and Accessories
Various accessories are available for the rack to extend its functionality. These include
VX plinth corner pieces with plinth trim panels,
cable routing panels in various versions,
glide rails,
48,3 cm ( 19 inch ) fasteners,
component shelves,
cable managers,
cable ducts,
drawers,
document clamps, and
levelling elements. These components allow individual adaptation of the rack to specific requirements, such as mounting devices with different depths, cable routing, or integrating document holders.
Mounting and Installation
The rack is pre-assembled and can be positioned directly at the installation site. The profile rails are mounted at the factory, limiting on-site installation to attaching the devices. The pre-assembled doors and roof significantly reduce installation effort. The levelling feet M12 with plinth adapters are included and allow for level positioning of the rack. The spacers with a height of 50 mm are used to raise a roof plate above the fan outlet in the roof plate, ensuring passive ventilation.
Operational Advantages
The pre-assembled configuration and ventilated construction of the rack reduce installation effort and support cooling of installed IT equipment. The robust construction from steel sheet and aluminum, along with a high load capacity of 15,000 N, ensures long service life and secure mounting. The combination of ventilated doors, variable profile rails, and pre-assembled structure makes the rack a practical solution for IT infrastructures. The surface treatment with dip priming and powder coating ensures high corrosion resistance and long service life of the rack.
The rack is declared with a
PCF value (Cradle-to-Gate) of 381.9 kg CO2 eq (Category B), with the value approximately calculated based on product weight. Certification is according to UL + C-UL (listed), confirming the safety and quality of the product.