Rittal 5308813, EAN: 4028177945050

Rittal 5308813 server cabinet VX IT ventilated 42HE

Rittal 5308813 server cabinet VX IT ventilated 42HE

Lieske Part No. 1775545
Mfg Part No 5308813
EAN-Code 4028177945050
Manufacturer Rittal
Here only 1.532,38 EUR
1.823,53 EUR incl. VAT

Further information for Rittal 5308813 server cabinet VX IT ventilated 42HE

General
MaterialSheet steel, aluminium, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted
Basic colourRAL 7035
ColourHousing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior fitting, front ventilation grille: RAL 9005, handle and hinges: RAL 9005
Width600 mm
Height2.000 mm
Depth1.000 mm
Height units42 HE
Mounting clearance to 19" plane, front/back87 mm / 213 mm
Mounting position 19" rackFront and rear
Layer spacing (as delivered)700 mm
19" mountingwith mounting bracket screwed to top and bottom of frame structure
ModelDynamic
Roof typemulti-part, with cable entry in corner areas front and rear
Door configuration rearSteel sheet door, ventilated, vertically divided, 180° hinges
Front door configurationAluminium-steel sheet door, ventilated, single-piece, 180° hinges
Profile rail version19"-profile rails dynamic in VX IT
Floor versionOpen
19" rack configuration19"-level front and rear
Mounting type for profile rail19"-level front and rear
Load capacity18.000 N
Max. load capacity (static) according to UL 2416 per cabinet15.000 N
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)206 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5308813 is a network/server rack of the VX IT series in the dynamic version, designed for use in IT infrastructures with room climate control. It has dimensions of 600 mm width, 2,000 mm height, and 1,000 mm depth, providing space for 42 height units (HE). The enclosure is made of sheet steel, with the front door made of aluminium (1.25 mm) and the rear door made of sheet steel (1.5 mm). The surface of the rack frame is dip-primed, the interior assembly is painted, while the rear door and roof are powder-coated. The front door is anodized/painted, ensuring a robust and aesthetically pleasing surface. The base colour of the enclosure is RAL 7035, with the front door featuring vertical silver profiles and horizontal profiles in RAL 9005. The interior assembly, front ventilation grille, handle, and hinges are also in RAL 9005.

Applications

The rack is designed for use in server and network environments, particularly in rooms with controlled climate conditioning. The ventilated doors enable efficient air circulation, supporting cooling of installed IT components. The dynamic version offers flexibility in mounting and adaptation to different requirements. The multi-part roof construction with cable entries in the front and rear corner areas facilitates cable routing and integration into existing infrastructures.

Functions and Equipment in Detail

The front door is designed as an aluminium-sheet steel door, ventilated and single-piece with 180° hinges, allowing full access to the interior. The rear door is a sheet steel door, ventilated and vertically divided, also with 180° hinges, ensuring optimal ventilation and accessibility. The doors are equipped with a comfort handle for half cylinder and a security locking system 3524 E. The 48,3 cm ( 19 inch ) profile rails are integrated in the dynamic version, enabling depth-variable mounting. The mounting position of the 48,3 cm ( 19 inch ) plane is possible both at the front and rear, with the mounting clearance being 87 mm at the front and 213 mm at the rear. The plane spacing in the delivered state is 700 mm.

Technology Explained Simply

The 48,3 cm ( 19 inch ) mounting is done via mounting brackets, which are screwed to the top and bottom of the frame structure. The rack’s load capacity is 18,000 N, with the maximum static load capacity according to UL 2416 per rack being 15,000 N. The frame structure is welded from 9-fold bent, closed hollow profiles, providing high torsional stiffness. The integrated blind rivet nuts M6 allow for protection-rated fastening of fittings. The combination of sheet steel and aluminium ensures a balanced mix of stability and weight reduction. The ventilation of the doors, with a free area of approximately 85% in the perforated sheet, supports thermal relief of the installed devices.

Compatibility and Accessories

The rack is compatible with various accessories that extend its functionality. These include cable management panels, insert modules such as PSM 6x C13, sliding rails TS IT, 48,3 cm ( 19 inch ) fasteners, connection cables for PSM, component shelves, cable ties, system lights, cable clamps, hex socket screws, cable managers, socket strips, hook-and-loop fasteners, power rails, and cage nuts. These components allow for individual adaptation to specific requirements in IT infrastructure.

Mounting and Installation

Mounting is done via the integrated mounting brackets on the frame structure. The 48,3 cm ( 19 inch ) profile rails are already integrated into the rack and can be adjusted as needed. The open floor construction allows for flexible installation. The roof construction with cable entries in the corner areas facilitates cable routing. The delivery includes spacers for raising a cover plate above the fan opening in the roof plate to enable passive ventilation; however, these are not required if no openings are present. Additionally, 12 x 48,3 cm ( 19 inch ) fasteners 1 HE and 25 conductive hex socket screws are included.

Operational Advantages

The rack offers high load capacity and a robust construction suitable for professional IT environments. The ventilated doors support cooling of installed devices, increasing operational reliability. The dynamic version allows flexible adaptation to different requirements. The integrated mounting elements and pre-assembled construction reduce installation time. The surface coating ensures high corrosion resistance and longevity. The combination of sheet steel and aluminium provides an optimal balance between stability and weight.

Delivery Contents

The rack is delivered with the rack frame, doors, roof plate, 48,3 cm ( 19 inch ) profile rails dynamic, spacers (height 50 mm), 12 x 48,3 cm ( 19 inch ) fasteners 1 HE, 25 conductive hex socket screws, comfort handle, and security locking system 3524 E. The spacers are used to raise a cover plate above the fan opening in the roof plate for passive ventilation and are not required for variants without openings. The delivery is made on an IPPC pallet.

Certifications and Standards

The rack is UL + C-UL (listed) certified. The surface coating meets requirements for corrosion resistance and longevity. The PCF values (Cradle-to-Gate) are 206 kg CO2 eq (Category B), with the value being approximately calculated based on product weight and self-declared.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775545
qrcode für Rittal 5308813 server cabinet VX IT ventilated 42HE