| General |
| Model | for VX IT 19" standard profile rail |
| Material | steel sheet |
| Surface protection | Painted |
| Colour | RAL 9005 |
| Scope of delivery | Including mounting hardware |
| Suitable for | Width: = 800 mm |
| PCF/VE (Cradle-to-Gate) | 4.5 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The VXIT 5302169 mounting bracket from Rittal is a specific system accessory for VX IT network and server enclosures with a width of 800 mm. It is designed for the secure mounting of 48,3 cm ( 19 inch ) profile rails in standard format within the enclosures. Installation is carried out on the cross brace, with the brackets mounted at the top and bottom to ensure stable and aligned positioning of the profile rails. The construction enables direct equipotential bonding of the profile rails via the mounting, which is important for electrical safety and proper functioning of installed devices.
Applications
This mounting bracket is exclusively intended for VX IT enclosures with a width of 800 mm. It is used in IT infrastructure where 48,3 cm ( 19 inch ) devices such as network switches, servers, or other rack systems are mounted in standardized enclosures. The product is used in industrial, commercial, and IT environments where stable and secure mounting of devices is required.
Functions and Equipment in Detail
The mounting bracket is made of sheet steel and is painted, providing a robust and corrosion-resistant surface. The color corresponds to RAL 9005, a dark gray, which visually integrates well in typical IT and industrial environments. The product is supplied in a packaging unit of 4 pieces and includes the required mounting hardware to enable installation without additional tools or parts.
Technology Explained Simply
Mounting is performed on the cross brace of the enclosure, stabilizing the profile rails horizontally. Direct mounting enables equipotential bonding, meaning the electrical potentials of the mounted devices are connected via the rails and brackets to the enclosure body. This is an important aspect for electromagnetic compatibility (EMC) and operational safety. The use of sheet steel ensures high mechanical stability, while the paint coating provides protection against environmental influences such as moisture or slight corrosion.
Compatibility and Accessories
The mounting bracket is specifically designed for VX IT enclosures with a width of 800 mm. It is compatible with 48,3 cm ( 19 inch ) profile rails in standard format. Suitable accessories include the VX IT cross brace for 48,3 cm ( 19 inch ) stand/dyn 800 mm, which is required for mounting the brackets. The combination of cross brace and mounting bracket enables structured and secure device mounting within the enclosure.
Mounting and Installation
Installation is carried out on the cross brace of the enclosure, with the mounting brackets positioned at the top and bottom. Installation typically takes place during enclosure setup, before devices are mounted. The positioning of the brackets is crucial for correct alignment and stability of the profile rails.
Operational Advantages
The mounting bracket provides a reliable mounting solution that ensures mechanical stability of installed devices. Direct equipotential bonding via the mounting enhances electrical safety and contributes to EMC compatibility. The use of sheet steel and paint coating ensures long service life and resistance to typical environmental conditions in IT and industrial facilities. The inclusion of mounting hardware reduces preparation time and simplifies installation.