| General |
| Applications | For cable routing and strain relief of guided cables on VX frame structure |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Mounting options | Direct screw connection between the vertical frames of the cabinet frame |
| Suitable for | Cabinet type: VX, VX IT, TX CableNet, width: = 800 mm, depth: = 800 mm |
| Suitable for width | = 800 mm |
| PCF/VE (Cradle-to-Gate) | 7.9 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal Kombischiene VX 5302021 is a system accessory for enclosures of type VX, VX IT and TX CableNet. It is designed for structured cable routing and strain relief on the frame structure of the enclosure frame. The rail is specifically designed for enclosures with a width of 800 mm and a depth of 800 mm. It is installed directly between the vertical frame posts, with mounting possible on both the inner and outer sides of the enclosure frame. The Kombischiene is made of sheet steel and is galvanized, ensuring a corrosion-resistant surface.
Cable routing and strain relief
The rail combines two functions: a C-profile rail for cable strain relief with integrated cable ties, and a cable routing rail with hammer heads. This allows cables to be secured using cable ties, cable clamps, or hook-and-loop fasteners, preventing strain loads. This design enables organized and secure cable routing along the enclosure frame, reducing mechanical stress on the cables.
Material and surface
The product is made of sheet steel and is galvanized. The galvanization provides protection against corrosion and ensures a longer service life, especially in environments with increased humidity or low aggressiveness. The surface is suitable for industrial environments, without meeting specific protection ratings such as IP.
Installation and mounting
The Kombischiene is mounted by direct screwing between the vertical frame posts of the enclosure frame. Mounting is done using the included mounting hardware. The packaging unit contains 4 pieces per pack, allowing flexible adaptation to the specific enclosure configuration. The installation solution is simple and requires no additional mounting tools.
Compatibility and accessories
The rail is compatible with enclosure types VX, VX IT and TX CableNet, requiring enclosure dimensions of 800 mm width and 800 mm depth. Suitable accessories include cable ties with a length of 150 mm and holding brackets for VX Kombischiene. These components support secure cable fastening and routing.
Operational benefits
The Kombischiene enables clear and organized cable routing, simplifying maintenance and inspection of installations. Strain relief protects cables from mechanical damage, especially during operation with movements or vibrations. Direct mounting on the vertical frame posts reduces the need for additional fastening elements and optimizes space usage within the enclosure.
Environmental and product information
The product life cycle (Cradle-to-Gate) has a PCF value of 7.9 kg CO2 eq per packaging unit. This value is classified in category B and is based on an approximate calculation derived from product weight, declared by the manufacturer. The product is delivered in a packaging unit of 4 pieces, with a net weight of 1.7 kg.