| General |
| Material | Sheet steel, galvanised |
| Scope of delivery | Including mounting hardware |
| Mounting note | The floor area must be open at the mounting points; additional drilling in the floor is required for mounting; the fastening material for attaching the housing to the base depends on the base material and is not included in the delivery |
| PCF/VE (Cradle-to-Gate) | 1.1 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal TS 5301350 is a
floor mounting angle made of
steel sheet, galvanised, specifically designed for the enclosure models VX and VX IT. It is used for the secure anchoring of the enclosure to the floor, particularly when the enclosure is prone to tipping due to top-heavy loading or cannot be integrated into a row of enclosures. The mounting is carried out via the designated mounting points in the lower section of the enclosure, requiring the floor area at these points to be open. The installation requires additional drilling in the floor to ensure secure anchoring.
Applications
The floor mounting angle is used in industrial and technical installations where stable anchoring of enclosures to the floor is required. This applies particularly in environments with high mechanical loads, uneven or movable subfloors, and in individual installations that are not integrated into an enclosure row. Typical applications include production facilities, machine building, automation technology, and electrical installations.
Functions and Equipment in Detail
The angle is made of galvanised steel sheet, ensuring high mechanical stability and corrosion resistance. The galvanisation protects the material from moisture and oxidation, extending the service life of the mounting component. The delivery includes the mounting material required for attaching the angle to the enclosure.
Technology Explained Simply
The floor mounting angle transfers the weight of the enclosure directly to the floor, preventing tipping or shifting. The design meets static requirements for mounting without impairing the functionality of the enclosure. The galvanised surface provides protection against environmental influences, especially in damp or slightly corrosive environments.
Compatibility and Accessories
The mounting angle is specifically designed for the enclosure models VX and VX IT. It is not suitable for other enclosure types, as the mounting points and dimensions are specifically adapted to the construction of these models. Use with other enclosure types is not intended and may result in insecure mounting. Installation is carried out using the mounting material included in the delivery, which is intended for connecting to the enclosure.
Mounting and Installation
Installation requires that the floor area of the enclosure is open at the mounting points to allow fitting of the angle. Additional drilling in the floor is necessary to ensure secure anchoring to the subfloor. Mounting to the enclosure is done using the material included in the delivery. Mounting to the subfloor requires separate fastening elements, which must be selected according to the floor surface. Installation should be carried out by qualified personnel to ensure static safety.
Advantages in Operation
Using the floor mounting angle increases the stability and safety of the enclosure during operation. It prevents tipping or shifting, especially with heavy or unevenly loaded enclosures. The galvanised surface ensures longer service life and reduced maintenance. Simple installation and a clear delivery scope facilitate the installation process and reduce planning and execution effort for the mounting.